Part:BBa_K3757011
3in1 Oak1 CtAEP1 sGFP (S65T)
3in1 gene cassette encoding the cyclotide precursor protein Oak1, the cyclizing asparaginyl endopeptidase CtAEP1, and the green fluorescent protein variant sGFP (S65T). The three genes are separately regulated by a CaMV 35S promoter and 35S terminator each. CtAEP1 is equiped with a C-terminal HA-tag, Oak1 is equiped with a C-terminal c-myc tag, for affinity purification or detection in Western blot. The gene cassette is located between Agrobacterium tumefaciens left border and a right border consensus sequences. This composite part can be used to express peptides in a cyclic form in Nicotiana benthamiana and potentially in other plants. sGFP acts as a reporter gene to monitor transfection efficiency.
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12INCOMPATIBLE WITH RFC[12]Illegal NheI site found at 2239
Illegal NheI site found at 4838
Illegal NheI site found at 6434
Illegal NheI site found at 6677 - 21INCOMPATIBLE WITH RFC[21]Illegal BglII site found at 4142
Illegal BamHI site found at 1577
Illegal BamHI site found at 1967
Illegal BamHI site found at 4398
Illegal BamHI site found at 4569 - 23COMPATIBLE WITH RFC[23]
- 25COMPATIBLE WITH RFC[25]
- 1000INCOMPATIBLE WITH RFC[1000]Illegal BsaI site found at 91
Illegal BsaI site found at 175
Illegal BsaI site found at 2326
Illegal BsaI site found at 4925
Illegal BsaI.rc site found at 6733
Usage and Biology
Our 3in1 gene cassette is designed to express cyclic peptides or proteins in plants like N. benthamiana. This is faciliated by the co-expression of three genes: The Oak1 precursor (BBa_K3669012) harbors the peptide or protein to get cyclized. A DNA-sequence encoding an arbitraty peptide can be cloned into this precursor in only one highly efficient Golden Gate cloning step. The success of cloning is thereby monitored by blue-white selection. The second gene encodes the cyclizing asparaginyl endopeptidase CtAEP1 (BBa_K3757000). This enzyme recognizes the Oak1 precursor and catalyzes cyclization of the peptide sequence embedded within it. Finally, a GFP variant sGFP (S65T) (BBa_K3757011) is co-expressed as a reporter gene. This enables an easy expression control of the three genes by fluorescence microscopy. The gene cassette is located in a binary vector between the Agrobacteria left and right border, which allow the tranfer and integration of the whole cassette into plant cells and the plant's genome, respectively. This composite part consists of the following basic and composite parts:
- A. tumefaciens LB (BBa_K233326)
- 35S Oak1 (BBa_K3757007)
- 35S CtAEP1 (BBa_K3757010)
- 35S sGFP (S65T) (BBa_K3757009)
- A. tumefaciens RB (BBa_K233327)
Cloning
Our Cloning Levels
We used four levels of Golden Gate cloning to assemble our final vectors, including green fluorescent protein (GFP), the asparagine endopeptidase (AEP), and the cyclotide precursor with the different grafted cyclotide constructs. In the first cloning level, we cloned our 35S promoter, 35S terminator, the precursor coding sequence, our antimicrobial peptide (AMP)-containing cyclotide, or the tag (HA, myc) into a LI backbone. In the second level, we assembled single genes into one vector by combining promoter, coding sequence, terminator, and tag sequences from the first level. In the third level, we now combined these whole genes into one vector. We built two kinds of level III vectors: 3in1 vectors containing the cyclotide precursor, the AEP and GFP, and 2in1 vectors containing only the precursor and GFP as a negative control. We called the vectors from this level “empty”, as they didn’t contain our AMP yet. In the last level, we now cloned our AMP into the precursor in the empty LIII vectors. We labeled these vectors according to the grafted AMP and its position. So, c_CHEN_1 indicates that the cyclotide contains the CHEN AMP in loop number 1. We called the negative control cyclotide without any grafted AMP c_blank. Furthermore, all used cyclotides contained a His-Tag in loop 5.
Why we used Golden Gate Cloning
We chose a Golden Gate based cloning method as this system not only allowed us to assemble three genes into one single vector but also to very quickly exchange the AMPs in the cyclotide precursor for grafting once the empty level III vector has been assembled. These are the most important requirements our final vector had to fulfill. We needed to express three genes at the same time: our AMP grafted into the cyclotide precursor, the AEP to convert the precursor into a cyclotide, and GFP as an expression control. In theory, these genes could also be placed on different vectors and plants could be co-infiltrated with the different systems. However, we highly preferred this 3in1 (3 genes in 1 vector) system, as this system ensures that AEP and cyclotide are expressed in the same cells, and all cells showing green fluorescence should also express the other two genes. Therefore, we regarded this system to be less error-prone and easier to handle. Building this vector by Golden Gate cloning was our preferred method, as we had access to basic vectors for this system including terminators, promoters, and tags. These vectors were kindly provided by the research group of Prof. Dr. Klaus Harter from the plant physiology at the ZMBP.
Testing our System
The vectors were assembled by Golden Gate reactions, transformed into Escherichia coli, and plasmids were purified from overnight cultures by Miniprep. All our cloning steps were successful, as confirmed by control digest and sequencing. The results produced for these steps are shown for the example of the LIII c_blank vector in figure 1.
The correct cloning of the cyclotide with the respective AMP into our empty LIII 3in1 vector could also be verified through blue-white screening of the grown colonies on LB-agar plates supplemented with X-Gal. The empty LIII 3in1 vector contains a lac-operon, which consists of the lac promoter, lac operator, and lacZ and lacI gene, at the cloning site, where the gene sequence coding for the precursor of the cyclotide (LI constructs c_blank, c_CHEN, or c_KR-12) was inserted by Esp3I restriction enzymes. The lac promoter is inducible, therefore transcription of the genes under its control only takes place when lactose or a lactose analogon like Isopropyl-β-D-thiogalactopyranoside (IPTG) is added to the growth medium as it is otherwise repressed by a repressor encoded by the lacI gene. The lacZ gene encodes for the enzyme β-galactosidase, which hydrolyses X-Gal to galactose and a substance, that turns blue upon oxidation. 1 Hence, we could recognize successfully cloned colonies by their color because bacteria carrying the LIII 3in1 plasmid with the cyclotide precursor appeared white and not blue due to them not expressing β-galactosidase.
The Efficiency of our System
In the end, our established cloning system enabled us to clone different grafted AMPs in a fast and efficient way. All our cloning steps directly worked, proving the high efficiency of our protocols. After the initial cloning of the level III vectors, new AMP constructs can be cloned into the final vector within 5 days. Therefore, the new AMPs have to be synthesized, which is cost-efficient due to their small size. To clone the synthesized fragments into the level III vectors within 5 days, the following schedule should be used:
| Table | |
|---|---|
| day 1 | Golden Gate reaction level one (synthesised fragment into level I vector), transformation of competent E.coli cells |
| day 2 | Pick colonies and set overnight cultures for Miniprep for plasmid purification |
| day 3 | Miniprep, confirm correct clones by control restriction digest, Golden Gate reaction level IV, transformation of competent E.coli cells |
| day 4 | Pick colonies (blue/white screening) and set overnight cultures for Miniprep for plasmid purification |
| day 5 | Miniprep, confirm correct clones by control restriction digest -> we have our purified plasmid for Agrobacterium transformation |
References
1Julin, D. A. (2018). Blue/White Selection. In R. D. Wells, J. S. Bond, J. Klinman, & B. S. S. Masters (Eds.), Molecular Life Sciences: An Encyclopedic Reference (pp. 72–73). Springer New York. https://doi.org/10.1007/978-1-4614-1531-2_94
Expression in Nicotiana benthamiana
Procedure
After successful cloning, the purified vectors were transformed into Agrobacterium tumefaciens for the following agroinfiltration of tobacco plants. After growing the plants for 4 days, the recombinant protein expression of our control green fluorescent protein (GFP) was confirmed by fluorescence microscopy and the leaves were harvested for protein extraction and purification.
Transformation of Agrobacterium tumefaciens
The successful transformation of A. tumefaciens was confirmed by colony growth on the respective selective plates. We used the strain AGL1 which grows relatively slow, but has a high transfection rate and expression level. We successfully transformed all our level four vectors including our two negative controls for cyclisation with 2in1 vectors without the AEP gene, and 3in1 constructs containing the empty cyclotide precursor as a control (c_blank), grafted CHEN constructs (c_CHEN_1 and c_CHEN_6), and grafted KR12 constructs (c_KR-12_1 and c_KR-12_6).
Infiltration of Tobacco Leaves
Nicotiana benthamiana leaves were infiltrated with A. tumefaciens containing the respective vectors and a p19 suppressor of gene-silencing construct. Co-transfection of p19 is essential, as p19 prevents that the addition of the vector leads to RNA-induced gene silencing1. We infiltrated the tobacco leaves by syringe infiltration for transient protein expression. As a negative control, leaves were infiltrated with Agrobacteria containing only the p19 construct.
Fluorescence Microscopy
After growing the plants for 4 days, the expression of our expression control protein GFP was confirmed by fluorescence microscopy. In comparison to the negative control, leaves transfected with our final vectors showed clear green fluorescence for all except the c_KR-12_6 construct (figure 2). As a negative control, non-infiltrated leaves or leaves infiltrated with p19 only were checked for green fluorescence. As shown in figure 2, this negative control showed no significant level of green fluorescence, confirming that the green fluorescence we detected for other vectors can only result from successful expression of one of our final vectors.
Discussion
We can draw the conclusion that the transfection was successful for both the 2in1 and the 3in1 vectors. As the sequences coding for our antimicrobial peptide (AMP) constructs are located on the same vector as the sequence encoding for the GFP, the AMPs should be expressed in the plant cells, as further discussed in the Extraction and Purification (Verlinkung zu Reiter) section. For the c_KR-12_6 construct, where no fluorescence was observed, infiltration was only tried once and the failure could be explained by procedural inaccuracies like insufficient resuspension of the Agrobacteria-containing infiltration medium, leading to infiltration with a too low Agrobacteria concentration. Concluding from the fluorescence microscopy results, we can summarize that our transfection strategy is efficient and works for different AMP constructs.
However, not the whole infiltrated leaves were fluorescent but defined foci only, which indicates a low expression rate. As a further attempt to analyze the effectiveness of the agroinfiltration, GFP expression in the whole leave and also the whole plant could be analyzed under UV light.
Furthermore, to increase the efficiency of agrotransfection and especially the expression of the desired genes, viral vectors could be used instead of a non-replicating construct for the transient expression. RNA viral-based vectors combine several advantages in one, such as the ability of the replicons to move into neighboring plant cells by cell-to-cell movement, and therefore promise high expression yields of recombinant proteins in plants. The successful Agrobacterium-mediated delivery of a tobacco mosaic virus (TMV)-based vector into N. benthamiana leaves has already been shown2 and it would therefore be a reasonable continuation of our project to attempt to reach higher expression yields of our cyclotides with a different vector.
References
1Voinnet, O., Rivas, S., Mestre, P., & Baulcombe, D. (2003). An enhanced transient expression system in plants based on suppression of gene silencing by the p19 protein of tomato bushy stunt virus. The Plant Journal: For Cell and Molecular Biology, 33, 949–956. https://doi.org/10.1046/j.1365-313X.2003.01676.x
2Marillonnet, Sylvestre; Thoeringer, Carola; Kandzia, Romy; Klimyuk, Victor; Gleba, Yuri (2005): Systemic Agrobacterium tumefaciens-mediated transfection of viral replicons for efficient transient expression in plants. In: Nature biotechnology 23 (6), S. 718–723. DOI: 10.1038/nbt1094.
References
1Julin, D. A. (2018). Blue/White Selection. In R. D. Wells, J. S. Bond, J. Klinman, & B. S. S. Masters (Eds.), Molecular Life Sciences: An Encyclopedic Reference (pp. 72–73). Springer New York. https://doi.org/10.1007/978-1-4614-1531-2_94
2
| None |