Difference between revisions of "Part:BBa K1033917"

(contribution addition)
 
(26 intermediate revisions by 4 users not shown)
Line 4: Line 4:
 
This chromoprotein from the coral ''Galaxea fascicularis'', gfasPurple (also known as gfasCP), naturally exhibits strong color when expressed. The protein has an absorption maximum at 577 nm giving it a purple color visible to the naked eye. Compared to many other chromoproteins, such as amilCP (<partinfo>BBa_K592009</partinfo>), amilGFP (<partinfo>BBa_K592010</partinfo>), spisPink (<partinfo>BBa_K1033932</partinfo>), asPink (<partinfo>BBa_K1033933</partinfo>) and aeBlue (<partinfo>BBa_K864401</partinfo>), the color development is slower. The color is readily observed in both LB or on agar plates after 24-48 hours of incubation. The protein gfasPurple is closely related to amilCP (<partinfo>BBa_K592009</partinfo>) and has significant sequence homologies with proteins in the GFP family.
 
This chromoprotein from the coral ''Galaxea fascicularis'', gfasPurple (also known as gfasCP), naturally exhibits strong color when expressed. The protein has an absorption maximum at 577 nm giving it a purple color visible to the naked eye. Compared to many other chromoproteins, such as amilCP (<partinfo>BBa_K592009</partinfo>), amilGFP (<partinfo>BBa_K592010</partinfo>), spisPink (<partinfo>BBa_K1033932</partinfo>), asPink (<partinfo>BBa_K1033933</partinfo>) and aeBlue (<partinfo>BBa_K864401</partinfo>), the color development is slower. The color is readily observed in both LB or on agar plates after 24-48 hours of incubation. The protein gfasPurple is closely related to amilCP (<partinfo>BBa_K592009</partinfo>) and has significant sequence homologies with proteins in the GFP family.
  
h
+
===Characterisation===
 +
The iGEM team of Rotterdam 2019 characterized this part more as part of the bronze criteria.
 +
[https://2019.igem.org/Team:Rotterdam_HR/Experiments]An addition to the characterization tests is to see whether there will be a change in the absorbance spectrum when the proteins are suspended in acidic or basic environments.
 +
 
 +
First, full-spectrum analysis with a Synergy™ LX Multi-Mode Microplate Reader(300-1000 nm) was performed to what iGEM Upsala 2013 has done, which is 300-800 nm (Figure 1-3).
 +
 +
The second characterization experiment (figure 4 and 5) was to test the effect of pH: 0.3, 4.3, 7.3, 10.3 and 14. The tests have been performed twice in different wells of a 96-wells plate with a Synergy™ LX Multi-Mode Microplate Reader, 100 uL of each chromoprotein sample was mixed with 100 uL of different pH-samples. Data of the Microplate Reader: https://2019.igem.org/wiki/images/1/18/T--Rotterdam_HR--excelfilepH.xlsx
 +
https://2019.igem.org/wiki/images/thumb/1/18/T--Rotterdam_HR--result10.jpg/800px-T--Rotterdam_HR--result10.jpg
 +
 
 +
Figure 1: Absorbance spectrum of saline.
 +
 
 +
https://2019.igem.org/wiki/images/thumb/f/f2/T--Rotterdam_HR--result13.jpg/800px-T--Rotterdam_HR--result13.jpg
 +
 
 +
Figure 2: Full spectrum analysis of gfasPurple.
 +
 
 +
https://2019.igem.org/wiki/images/thumb/6/61/T--Rotterdam_HR--result14.jpg/800px-T--Rotterdam_HR--result14.jpg
 +
 
 +
Figure 3: Duplicate of the full spectrum analysis of gfasPurple.
 +
 
 +
https://2019.igem.org/wiki/images/8/8e/T--Rotterdam_HR--result18.jpg
 +
 
 +
Figure 4: Full spectrum pH-analysis of gfasPurple.
 +
 
 +
https://2019.igem.org/wiki/images/4/49/T--Rotterdam_HR--design2.png
 +
 
 +
Figure 5: Duplicate of the full spectrum pH-analysis of gfasPurple.
 +
 
  
 
===Characterisation===
 
===Characterisation===
Line 40: Line 66:
 
'''Grand average of hydropathicity (GRAVY):''' -0.544
 
'''Grand average of hydropathicity (GRAVY):''' -0.544
  
In order to measure the absorbance spectrum of gfasPurple we transformed the construct (consisting of J23110 Promotor, RBS B0034 and gfasPurple coding sequence) into competent ''E. coli''. After cultivation and we lysed the harvested cells according to this [https://2019.igem.org/Team:Humboldt_Berlin/Experiments protocol.]
+
In order to measure the absorbance spectrum of gfasPurple we transformed the construct (consisting of <partinfo>BBa_J23110</partinfo> Promotor, <partinfo>BBa_B0034</partinfo> RBS and gfasPurple coding sequence) into competent ''E. coli''. After cultivation and we lysed the harvested cells according to this [https://2019.igem.org/Team:Humboldt_Berlin/Experiments protocol.]
  
 
<gallery mode=packed-hover>
 
<gallery mode=packed-hover>
Line 49: Line 75:
  
 
   
 
   
The absorbance spectrum was measured for 24 samples of 150 µl lysate in 96-well plate on TECAN Plate Reader Infinite 200 Pro. In figure 1 you can see the relative absorbance spectrum including the respective standard deviation with a peak at 580 nm (compared to an excitation maximum of 577 nm in the literature [2]).  
+
The absorbance spectrum was measured for 24 samples of 150 µl lysate in 96-well plate on TECAN Plate Reader Infinite 200 Pro. In figure 1 you can see the absorbance spectrum including the respective standard deviation with a peak at 580 nm (compared to an excitation maximum of 577 nm in the literature [2]).  
  
  
<!-- add cell strain -->
+
{|class='wikitable'
 +
|colspan=4|Table 1. Parameters utilized for absorbance spectrum
 +
|-
 +
|'''Parameter'''
 +
|'''Value'''
 +
|-
 +
|Number of Samples
 +
|24
 +
|-
 +
|Wavelength Step Size
 +
|2
 +
|-
 +
|Absorbance Scan: Excitation Wavelength Measurement Range (nm)
 +
|[300-800]
 +
|-
 +
|Number of Flashes
 +
|25
 +
|-
 +
|Settle Time (ms)
 +
|0
 +
|-
 +
|}
  
  
  
 
[[File:T--Humboldt Berlin--CharacterisationGfasPurpleAbs.png|frame|none|Figure 1. gfasPurple absorbance spectrum]]
 
[[File:T--Humboldt Berlin--CharacterisationGfasPurpleAbs.png|frame|none|Figure 1. gfasPurple absorbance spectrum]]
 +
<br><br>
 +
===Contribution===
 +
Group: Linkoping_Sweden iGEM 2021
 +
<br>
 +
Author: Ewelina Bladh
 +
<br>
 +
Summary:
 +
In this contribution, we recorded color development in colonies of ''E.coli'' cells of strain XL1. In addition to studying the color development, we confirmed gfasPurple's absorbance maximum wavelength. This also shows reproducibility. <br> <br>
 +
 +
'''Color Development''' <br>
 +
In order to determine the progression of color development in colonies, ''E.coli'' cells (XL1) were plated onto LB-Miller agar plates containing a concentration of 25 ug/mL chloramphenicol. The cells were plated in two ways after transformation. The first by plating 100 µL immediately from the liquid culture. The second by first centrifuging the culture, discarding 90% of the supernatant and resuspending the cell pellet in the remaining 10%, followed by plating 100 µL of the resuspension. This results in what is from now on referred to as the diluted and concentrated plate, respectively. <br>
 +
 +
These plates were incubated in 37°C for the following four days, where they were checked upon each day. ''Figure 1'', displayed below, shows the diluted and concentrated plates during this four day study. The illustration of the diluted plate shows that after 12 hours, no color can be seen to the naked eye. This changes over the course of the next 24 hours, where at 36 hours the colonies are clearly visible. The color intensity increases over the next two days. The same can be said about the concentrated plate, but unlike the diluted plate the concentrated plate shows weak indications of colored colonies already at 12 hours. <br>
 +
 +
[[Image:Dilgfaspurpleplates.png|800px|center|]]
 +
[[Image:Gfaspurpleplates.png|800px|center|]]
 +
<div class="figurtext" style=font-size:90%;>''Figure 1.'' Top shows the diluted plate over the course of four days. Bottom image shows the concentrated plate over the course of four days. The time each picture was taken after plating is displayed under the each picture in hours.</div> <br>
 +
 +
 +
'''Absorbance and Fluorescence'''<br>
 +
Single colonies displaying a purple color were picked from the diluted plates to create liquid cultures. The liquid cultures consist of 5 mL LB-Miller media and a concentration of 25 µg/mL chloramphenicol. The liquid cultures were incubated at 37°C and 200 rpm for the next two days to ensure protein expression. After incubation, the liquid cultures were centrifuged until a pellet formed. The supernatant was discarded, and the remaining pellet was placed in a -20°C freezer. Cell lysis was done using both water and sonication. The frozen pellet was thawed and 5 mL autoclaved dH<sub>2</sub>O was added, followed by vortex treatment to resuspend the pellet. Sonication on ice was the next step taken to lyse any cells that did not lyse upon the addition of water. The amplitude of the sonicator was set to 30%, 30 seconds pulsing followed by 30 seconds rest for a total of 2 minutes. Following sonication, the cultures were centrifuged until a pellet formed whereupon the supernatant was transferred to a clean 15 mL Falcon tube and the pellet was discarded. The supernatant of gfasPurple can be see  to the left in ''Figure 2''. Simultaneous experiments with other chromoproteins was also made, their supernatant can be seen with gfasPurple to the right in ''Figure 2''. The following chromoproteins were also assessed in the same way as gfasPurple: tsPurple (<partinfo>BBa_K1033903</partinfo>), amajLime (<partinfo>BBa_K1033914</partinfo>), spisPink (<partinfo>BBa_K1033923</partinfo>), meffBlue (<partinfo>BBa_K1033900</partinfo>), and asPink (<partinfo>BBa_K1033926</partinfo>). <br>
 +
 +
As a control, plates were also made with untransformed XL1-cells. A colony was picked from the diluted plate to start a liquid culture, followed by lysis like the cells transformed with gfasPurple. Treatment of control and experimental cells was identical apart from the control culture not being exposed to antibiotics. The supernatant of the control can be seen to the right in ''Figure 2'' along with other chromoproteins. <br>
 +
 +
[[Image:Gfaspurple.png|310px|]]
 +
[[Image:Chromoproteinssupernat.png|550px|]]
 +
<div class="figurtext" style=font-size:90%;> ''Figure 2.'' To the left, the supernatant of lysed XL1-cells expressing gfasPurple following sonication. To the right, all chromoproteins simultaneously experimented on including the control. The chromoproteins pictured to the right, from left to right, are: asPink (<partinfo>BBa_K1033926</partinfo>), gfasPurple (<partinfo>BBa_K1033917</partinfo>), spisPink (<partinfo>BBa_K1033923</partinfo>), meffBlue (<partinfo>BBa_K1033900</partinfo>), tsPurple (<partinfo>BBa_K1033903</partinfo>), amajLime (<partinfo>BBa_K1033914</partinfo>), and the control.  </div> <br>
 +
 +
In order to measure the absorbance, 100 µL supernatant of gfasPurple and 100 µL supernatant of the control were pipetted into a 96-well plate and measurements were made with BMG Clariostar plate reader. Measurements of absorbance were taken every 2 nm in the range 300 nm to 850 nm. This interval was chosen to include the entire visual spectra including margins. The data yielded from the measurements were subsequently baselined by subtracting the control's absorbance values from gfasPurple's absorbance values followed by normalization. The resulting graph for gfasPurple's absorbance can be seen in ''Figure 3'' below. The absorbance maximum of gfasPurple proved to occur at approximately 578 nm. This result differs slightly from the result achieved by the team of Humboldt_Berlin of 2019 (see above). However, this may be due to differing experimental setups and machinery. <br>
 +
 +
[[Image:Meffblueabs.png|700px|center|]]
 +
<div class="figurtext" style=font-size:90%;> ''Figure 3.'' Normalized absorbance of meffBlue where the control's absorbance have been subtracted. The absorbance maximum occurs at approximately 578 nm. </div>  <br>
 +
 +
When examining the supernatant extracted from gfasPurple-expressing cells on a UV-table, no fluorescence was detected. The chromoprotein amajLime (<partinfo>BBa_K1033914</partinfo>) was studied at the same time, functioning as a positive control, and the lysate from the control functioned as a negative control.  <br> <br>
  
 
===Source===
 
===Source===

Latest revision as of 20:38, 19 October 2021

gfasPurple, purple chromoprotein (incl RBS, J23110)

This chromoprotein from the coral Galaxea fascicularis, gfasPurple (also known as gfasCP), naturally exhibits strong color when expressed. The protein has an absorption maximum at 577 nm giving it a purple color visible to the naked eye. Compared to many other chromoproteins, such as amilCP (BBa_K592009), amilGFP (BBa_K592010), spisPink (BBa_K1033932), asPink (BBa_K1033933) and aeBlue (BBa_K864401), the color development is slower. The color is readily observed in both LB or on agar plates after 24-48 hours of incubation. The protein gfasPurple is closely related to amilCP (BBa_K592009) and has significant sequence homologies with proteins in the GFP family.

Characterisation

The iGEM team of Rotterdam 2019 characterized this part more as part of the bronze criteria. [1]An addition to the characterization tests is to see whether there will be a change in the absorbance spectrum when the proteins are suspended in acidic or basic environments.

First, full-spectrum analysis with a Synergy™ LX Multi-Mode Microplate Reader(300-1000 nm) was performed to what iGEM Upsala 2013 has done, which is 300-800 nm (Figure 1-3).

The second characterization experiment (figure 4 and 5) was to test the effect of pH: 0.3, 4.3, 7.3, 10.3 and 14. The tests have been performed twice in different wells of a 96-wells plate with a Synergy™ LX Multi-Mode Microplate Reader, 100 uL of each chromoprotein sample was mixed with 100 uL of different pH-samples. Data of the Microplate Reader: https://2019.igem.org/wiki/images/1/18/T--Rotterdam_HR--excelfilepH.xlsx 800px-T--Rotterdam_HR--result10.jpg

Figure 1: Absorbance spectrum of saline.

800px-T--Rotterdam_HR--result13.jpg

Figure 2: Full spectrum analysis of gfasPurple.

800px-T--Rotterdam_HR--result14.jpg

Figure 3: Duplicate of the full spectrum analysis of gfasPurple.

T--Rotterdam_HR--result18.jpg

Figure 4: Full spectrum pH-analysis of gfasPurple.

T--Rotterdam_HR--design2.png

Figure 5: Duplicate of the full spectrum pH-analysis of gfasPurple.


Characterisation

Team: Humboldt_Berlin 2019


ExPASy ProtParam Results:


Number of amino acids: 220

Molecular weight: 24816.17 Da

Theoretical pI: 7.61

Total number of negatively charged residues (Asp + Glu): 24

Total number of positively charged residues (Arg + Lys): 25


Extinction coefficients:

Ext. coefficient 37610 M-1 cm-1

Abs 0.1% (=1 g/l) 1.516, assuming all pairs of Cys residues form cystines

Ext. coefficient 37360 M-1 cm-1

Abs 0.1% (=1 g/l) 1.505, assuming all Cys residues are reduced

Instability index: The instability index (II) is computed to be 39.71. This classifies the protein as stable.

Aliphatic index: 61.50

Grand average of hydropathicity (GRAVY): -0.544

In order to measure the absorbance spectrum of gfasPurple we transformed the construct (consisting of BBa_J23110 Promotor, BBa_B0034 RBS and gfasPurple coding sequence) into competent E. coli. After cultivation and we lysed the harvested cells according to this protocol.


The absorbance spectrum was measured for 24 samples of 150 µl lysate in 96-well plate on TECAN Plate Reader Infinite 200 Pro. In figure 1 you can see the absorbance spectrum including the respective standard deviation with a peak at 580 nm (compared to an excitation maximum of 577 nm in the literature [2]).


Table 1. Parameters utilized for absorbance spectrum
Parameter Value
Number of Samples 24
Wavelength Step Size 2
Absorbance Scan: Excitation Wavelength Measurement Range (nm) [300-800]
Number of Flashes 25
Settle Time (ms) 0


Figure 1. gfasPurple absorbance spectrum



Contribution

Group: Linkoping_Sweden iGEM 2021
Author: Ewelina Bladh
Summary: In this contribution, we recorded color development in colonies of E.coli cells of strain XL1. In addition to studying the color development, we confirmed gfasPurple's absorbance maximum wavelength. This also shows reproducibility.

Color Development
In order to determine the progression of color development in colonies, E.coli cells (XL1) were plated onto LB-Miller agar plates containing a concentration of 25 ug/mL chloramphenicol. The cells were plated in two ways after transformation. The first by plating 100 µL immediately from the liquid culture. The second by first centrifuging the culture, discarding 90% of the supernatant and resuspending the cell pellet in the remaining 10%, followed by plating 100 µL of the resuspension. This results in what is from now on referred to as the diluted and concentrated plate, respectively.

These plates were incubated in 37°C for the following four days, where they were checked upon each day. Figure 1, displayed below, shows the diluted and concentrated plates during this four day study. The illustration of the diluted plate shows that after 12 hours, no color can be seen to the naked eye. This changes over the course of the next 24 hours, where at 36 hours the colonies are clearly visible. The color intensity increases over the next two days. The same can be said about the concentrated plate, but unlike the diluted plate the concentrated plate shows weak indications of colored colonies already at 12 hours.

Dilgfaspurpleplates.png
Gfaspurpleplates.png
Figure 1. Top shows the diluted plate over the course of four days. Bottom image shows the concentrated plate over the course of four days. The time each picture was taken after plating is displayed under the each picture in hours.


Absorbance and Fluorescence
Single colonies displaying a purple color were picked from the diluted plates to create liquid cultures. The liquid cultures consist of 5 mL LB-Miller media and a concentration of 25 µg/mL chloramphenicol. The liquid cultures were incubated at 37°C and 200 rpm for the next two days to ensure protein expression. After incubation, the liquid cultures were centrifuged until a pellet formed. The supernatant was discarded, and the remaining pellet was placed in a -20°C freezer. Cell lysis was done using both water and sonication. The frozen pellet was thawed and 5 mL autoclaved dH2O was added, followed by vortex treatment to resuspend the pellet. Sonication on ice was the next step taken to lyse any cells that did not lyse upon the addition of water. The amplitude of the sonicator was set to 30%, 30 seconds pulsing followed by 30 seconds rest for a total of 2 minutes. Following sonication, the cultures were centrifuged until a pellet formed whereupon the supernatant was transferred to a clean 15 mL Falcon tube and the pellet was discarded. The supernatant of gfasPurple can be see to the left in Figure 2. Simultaneous experiments with other chromoproteins was also made, their supernatant can be seen with gfasPurple to the right in Figure 2. The following chromoproteins were also assessed in the same way as gfasPurple: tsPurple (BBa_K1033903), amajLime (BBa_K1033914), spisPink (BBa_K1033923), meffBlue (BBa_K1033900), and asPink (BBa_K1033926).

As a control, plates were also made with untransformed XL1-cells. A colony was picked from the diluted plate to start a liquid culture, followed by lysis like the cells transformed with gfasPurple. Treatment of control and experimental cells was identical apart from the control culture not being exposed to antibiotics. The supernatant of the control can be seen to the right in Figure 2 along with other chromoproteins.

Gfaspurple.png Chromoproteinssupernat.png

Figure 2. To the left, the supernatant of lysed XL1-cells expressing gfasPurple following sonication. To the right, all chromoproteins simultaneously experimented on including the control. The chromoproteins pictured to the right, from left to right, are: asPink (BBa_K1033926), gfasPurple (BBa_K1033917), spisPink (BBa_K1033923), meffBlue (BBa_K1033900), tsPurple (BBa_K1033903), amajLime (BBa_K1033914), and the control.

In order to measure the absorbance, 100 µL supernatant of gfasPurple and 100 µL supernatant of the control were pipetted into a 96-well plate and measurements were made with BMG Clariostar plate reader. Measurements of absorbance were taken every 2 nm in the range 300 nm to 850 nm. This interval was chosen to include the entire visual spectra including margins. The data yielded from the measurements were subsequently baselined by subtracting the control's absorbance values from gfasPurple's absorbance values followed by normalization. The resulting graph for gfasPurple's absorbance can be seen in Figure 3 below. The absorbance maximum of gfasPurple proved to occur at approximately 578 nm. This result differs slightly from the result achieved by the team of Humboldt_Berlin of 2019 (see above). However, this may be due to differing experimental setups and machinery.

Meffblueabs.png
Figure 3. Normalized absorbance of meffBlue where the control's absorbance have been subtracted. The absorbance maximum occurs at approximately 578 nm.

When examining the supernatant extracted from gfasPurple-expressing cells on a UV-table, no fluorescence was detected. The chromoprotein amajLime (BBa_K1033914) was studied at the same time, functioning as a positive control, and the lysate from the control functioned as a negative control.

Source

Galaxea fascicularis. The protein was first extracted and characterized by Alieva et. al. under the name gfasCP (GenBank: DQ206394.1). This version is codon optimized for E coli by Genscript.

References

[http://www.ncbi.nlm.nih.gov/pubmed/18648549] Alieva, Naila O., et al. "Diversity and evolution of coral fluorescent proteins." PLoS One 3.7 (2008): e2680.

[2] Liljeruhm, Josefine et al. “Engineering a palette of eukaryotic chromoproteins for bacterial synthetic biology.” Journal of biological engineering vol. 12:8. 10 May. 2018, doi:10.1186/s13036-018-0100-0


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    INCOMPATIBLE WITH RFC[12]
    Illegal NheI site found at 7
    Illegal NheI site found at 30
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]