DNA

Part:BBa_K4245107:Experience

Designed by: Akshaya Poonepalle, Michelle Jing, Shivaek Venkateswaran, Daeun Lee, Sahana Ram Narayanan, Richard Jiang, Sishnukeshav Balamurali, Christina Yi, Varnica Basavaraj, Manaswi Gorle, Janet Standeven   Group: iGEM22_Lambert_GA   (2022-09-22)
Revision as of 16:43, 11 October 2022 by Vandanavk (Talk | contribs)

Applications of BBa_K4245107

Lambert_GA 2022 This part was experimented with as a part of the composite parts, hsa-miR-1-3p RCA Padlock Probe (BBa_K4245200) and hsa-miR-1-3p RCT Padlock Probe (BBa_K4245201). RCA with BBa_K4245200 Rolling Circle Amplification (RCA) was successful with this part. The products of RCA are long DNA strands composed of repeating complementary sequences of the used padlock probe. Therefore, one way in which the success of RCA can be determined is by running the rolling circle products (RCP) on an agarose gel. Since a fluorescent band very close to the wells would indicate the presence of an extremely long DNA strand, our RCP was run on a gel. The result was a really long DNA strand close to the well.

Figure 1. Image of gel ran with miRNA-1 RCP product.


By analyzing the results on the gel, our team concluded that a very long strand of DNA, likely the RCP, was produced. The gel exhibited a fluorescent band of DNA very close to the well, which indicates that a long strand of DNA, greater than 1 kB, was produced due to our reaction (see Fig. 1). As a result, we can infer that the RCA reaction allowed the creation of a really long DNA stand -- our RCP.
The RCP was also tested with the split lettuce aptamer. DFHBI-1T and the lettuce right and the modified lettuce left was added to the RCP, and the fluorescence was read on the plate reader.

Figure 2. Graph of split Lettuce reaction with RCP. The values represent the change in fluorescence before and after the reaction with DFHBI-1T took place.


As seen in Figure 2, the increase in fluorescence of the RCP + Lettuce + dye was significantly greater than the controls, which suggests that the split Lettuce was successfully bound to the RCP. In addition, the DFHBI-1T was also successfully bound within the split lettuce secondary folding. According to these results, RCA was successful, and the reaction between the split lettuce and RCP was successful as well.
In addition to split lettuce, RCA and RCT were also tested with the FAM and BHQ1 labeled linear probes.
As shown by Figure 3, there is a statistically significant decrease in the fluorescent output of a triplicate with FAM Probe, BHQ Probe, and RCP as compared to a triplicate of just FAM tagged Probes. This confirms that we did produce our desired RCP in the RCA reaction and that this mechanism was an effective reporting method for our sensor.

Figure 3. Fluorescent Read of Rolling Circle Product for miRNA-133-3p and miRNA-1-3p


Therefore, RCA created RCP that can be quantified by our chosen reporting mechanisms.
RCT with BBa_K4245201 Rolling Circle Transcription (RCT) was run with this part but proved to be unsuccessful. The products of RCT are long RNA strands composed of repeating complementary sequences of the used padlock probe. Therefore, one way in which the success of RCT can be determined is by running the RCT products on an agarose gel, since a fluorescent band very close to the wells would indicate the presence of extremely long nucleic acid strands. However, the products of RCT did not appear on a 1% agarose gel (see Fig. 1).

Figure 1. Picture of RCT products (circled in green) run on a 1% agarose gel. There were no visible bands that indicate the production of long RNA strands.

The RCT products were also tested with DFHBI-1T, a fluorophore that fluoresces when reacting with the Broccoli RNA fluorescent aptamer. DFHBI-1T was added to the RCT products, and the fluorescence was read on the plate reader.

Figure 2. Graph of fluorescence output before and after the addition of DFHBI-1T to RCT products and controls.


However, when we added DFHBI-1T to the RCT products, there was no significant increase in fluorescence observed as compared to the controls (see Fig 2.).

From these results, Lambert iGEM determined that the process of RCT itself was not successful in our lab. We also tested the folding of the aptamer with the spacer with our BBa_K4245210 experimentation.

User Reviews

UNIQ6488d6f525730ef1-partinfo-00000003-QINU UNIQ6488d6f525730ef1-partinfo-00000004-QINU