Part:BBa_K1897019

p70-34-ALR-Terminator

The construct contains lldRO1-J23117-lldRO2 promoter designed by team ETH-Zurich 2015 (Part:BBa_K1847008) with a strong RBS (Part:BBa_B0034), followed by a coding sequence of Alanine Racemase (Part:BBa_K1172901) and a lambda t0 terminator (Part:BBa_K1897030).

Sequence and Features

Assembly Compatibility:

• 10
  COMPATIBLE WITH RFC[10]
• 12
  INCOMPATIBLE WITH RFC[12]

  Illegal NheI site found at 78
  Illegal NheI site found at 101
  Illegal NheI site found at 500
  
• 21
  INCOMPATIBLE WITH RFC[21]

  Illegal BglII site found at 424
  Illegal BamHI site found at 1126
  
• 23
  COMPATIBLE WITH RFC[23]
• 25
  INCOMPATIBLE WITH RFC[25]

  Illegal AgeI site found at 542
  Illegal AgeI site found at 842
  
• 1000
  INCOMPATIBLE WITH RFC[1000]

  Illegal BsaI.rc site found at 299
  

Usage and Biology

This is RIOT sensor 1 which belongs to the RIOT sensor collection (Part:BBa_K1897019, Part:BBa_K1897020, Part:BBa_K1897021, Part:BBa_K1897022, Part:BBa_K1897023, Part:BBa_K1897024, Part:BBa_K1897025, Part:BBa_K1897026, Part:BBa_K1897027) and was designed to detect the increased level of L-lactate produced by tumor cells in the microenviroment. A lactate sensitive promoter obtained from 2015 ETH Zurich team was used as starting material. Our designed sensor has to be extremely sensitive to small changes in lactate concentration. This means that our sensor needs to have no basal expression and significant increase in reporter output (Alanine Racemase, ALR) in the presence of lactate. ALR is required for synthesis of D-alanine, an essential amino acid for bacterial survival [1].

We minimise the basal expression of our reporter by linking different strength RBS parts with:

• A shorter version of the promoter region for wild-type lldPRD operon (Part:BBa_K1897037, derived from Part Part:BBa_K822000) called “p62”, or
• The lldRO1-J23117-lldRO2 promoter (Part:BBa_K1847008) called “p70”, or
• The constitutively expressed promoter J23100 (Part:BBa_K314100).

Figure 1: Design of the RIOT sensor collection
This collection is a combination of three promoters and three ribosomal binding sites (RBS) of different strengths. The promoters consists of a modified lactate sensor p70 (Part:BBa_K1847008), a shorter version of the promoter region for wild-type lldPRD operon (Part:BBa_K1897037, derived from Part:BBa_K822000) called p62 and a constitutively expressed promoter J23100 (Part:BBa_K314100).

Construction of RIOT sensor 1: p70-34-ALR-Terminator

Each individual components including the promoter, the coding sequence (ALR) and the terminator is isolated and amplified by PCR. After obtaining all the individual components, we ligated them by PCR overlap using appropriate primers (Figure 2). A second stop codon was added at the end of ALR sequence to enhance the efficiency of the translational termination.

Figure 2: Construction of p70-34-ALR-Terminator by PCR overlap.
The expected size, including Biobrick Prefix, Suffix and bases flanking restriction enzyme recognition sequences, is 1422 bps. Lane 1 marks DNA ladder. Lane 2 is PCR product of p70-34-ALR-Terminator

Characterization of RIOT sensor 1: p70-34-ALR-Terminator

RIOT sensors were transformed into E. coli Nissle ∆alr, a D-alanine auxotrophic mutant bacteria [2]. In the absence of lactate, lldR binds to two operators in the promoter region and inhibit the expression of ALR. In the presence of lactate, lactate binds lldR, preventing its binding to the operators. Consequently, ALR, under the control of RIOT sensor promoter in the presence of L-lactate, will be expressed and rescue the transformed bacteria grown in media without D-alanine supplement (Figure 3).

Figure 3: Working mechanism of RIOT sensor.
(A) In the absence of lactate, lldR binds to two operators in the promoter region and inhibit the expression of Alanine Racemase (ALR).
(B) In the presence of lactate, lactate binds lldR, preventing its binding to the operators. Consequently, ALR is expressed and converts L-alanine to D-alanine which helps bacteria to survive.

Therefore, the performance of RIOT sensors were assessed by the growth rate of transformed bacteria over a range of lactate concentration in M9 minimal media via natural logarithm (LN) of OD600. We used linear regression analysis to fit the data of bacterial growth rate using four data points of LN (OD600) values from 90 to 180 min of each sensor. This is because the growth rate of each constructs appeared to deviate from each other at the 90-minute time point (Part:BBa_K1897021 and Part:BBa_K1897024). We postulated that induction of ALR by lactate might take about 90 minutes. The slope of each fitted linear line represents the growth rate of bacteria (P-value < 0.01).

Since naturally occurring amino acids have an L-configuration in mammals and D-alanine was also shown to be absent from human plasma protein [3] [4], bacteria transformed with a well-controlled sensor will not be able to grow in the absence of both D-alanine and lactate. The results shown in Figure 4 suggested that RIOT sensor 1 exhibited high leakiness. The transformed bacteria were able to survive after 6 hours even without addition of lactate. Moreover, Table 1 showed that transformed bacteria with sensor 1, regardless of lactate concentration appeared to have similar initial growth rate compared to those were grown in the media containing D-alanine supplement (0.008 – 0.009 min^-1, P-value < 0.01). This is probably because the amount of ALR expressed at the lowest lactate concentration is still sufficient to convert enough L-alanine into D-alanine, which help the bacteria to maintain their normal growth. The insignificant differences in growth rate of bacteria treated with various lactate concentrations indicated that RIOT sensor using lldRO1-J23117-lldRO2 promoter ligated with strong RBS designed by team ETH_Zurich 2015 was not sensitive enough to detect small changes in lactate concentration in the tumour microenvironment.

Figure 4: Characterization of RIOT sensor 1: p70-34-ALR-Terminator
D-alanine auxotrophic mutant bacteria were transformed with plasmids containing ALR sequence under the control of RIOT sensor 1: p70-34-ALR-Terminator (Part:BBa_K1897019). The overnight culture were spun down and resuspended with M9 minimal media without D-alanine supplement. Then, they were subjected to different treatments: without and with addition of D-alanine supplement (50 μg/ml) and with addition of lactate of 10^-4 to 10^-2 M. OD600 readings were measured for 6 hours. LN of OD600 readings reflects the bacterial growth rate.

Table 1: Bacterial growth rate of RIOT sensor 1: p70-34-ALR-Terminator (Part:BBa_K1897019)

N = 1 ± SEM
Doubling time = LN (2) / Growth rate.

Lactate concentration (M)	Growth rate (min-1)	Doubling time (min)	R square
10-4	0.00935 ± 0.000594	74.3 ± 4.73	0.992
10-3	0.0107 ± 0.000505	64.9 ± 3.06	0.996
10-2	0.00659 ± 0.000173	105.2 ± 2.76	0.999

References

1. Walsh, C. T. (1989). Enzymes in the D-alanine branch of bacterial cell wall peptidoglycan assembly. Journal of biological chemistry, 264(5), 2393-2396.
2. In Young Hwang, Elvin Koh, Adison Wong, John C. March, William E. Bentley, Yung Seng Lee and Matthew Wook Chang (2016). Engineered probiotic microbes eliminate and prevent pathogen infection in the mammalian gut. Manuscript submitted.
3. Nagata, Y., Masui, R., & Akino, T. (1992). The presence of free D-serine, D-alanine and D-proline in human plasma. Experientia, 48(10), 986-988.
4. Hoeprich, P. D. (1965). Alanine: Cyeloserine Antagonism. VI. Demonstration of D-Alanine in the Serum of Guinea Pigs and Mice. Journal of Biological Chemistry, 240, 1654-60.