Sortase A7M (Ca²⁺-independent variant) expression cassette

Profile

Name	Sortase A7M
Base pairs	450
Molecular weight	17.85 kDa
Origin	Staphylococcus aureus, synthetic
Properties	Ca²⁺-independent, transpeptidase, linking sorting motif LPXTG to poly-glycine Tag

Sequence and Features

Assembly Compatibility:

10
COMPATIBLE WITH RFC[10]
12
COMPATIBLE WITH RFC[12]
21
INCOMPATIBLE WITH RFC[21]
Illegal XhoI site found at 533
23
COMPATIBLE WITH RFC[23]
25
COMPATIBLE WITH RFC[25]
1000
COMPATIBLE WITH RFC[1000]

Structure

Figure 1 : 3D-Structure of Sortase A7M. To find out more, visit our modeling page.

Usage and Biology

Transpeptidase: Sortase

Sortases belong to the class of transpeptidases and are mostly found in gram-positive bacteria. The high rate of resistance to several antibiotics targeting gram-positive bacteria is also based on the property of this enzyme class. Sortases can non-specifically attach virulence and adhesion‐associated proteins to the peptidoglycans of the cell-surface.
In general, sortases are divided into six groups (A-F) that have slightly different properties and perform three tasks in cells. Group A and B attach proteins to the cell-surface while Group C and D help building pilin-like structures. Group E and F are not properly investigated yet which is why their exact function is not known. For our project we are especially interested in the sortases of the group A since they covalently attach various proteins or peptides on the cell membrane as long as their targeting motif is at the C-terminus of the corresponding protein. In comparison to other transpeptidases Sortase A has the advantage that it is rather stable regarding variations in pH. Sortase A catalyzes the formation and cleavage of a peptide bond between the C-terminal LPXTG amino acid motif and an N-terminal poly-glycine motif. The enzyme originates from Staphylococcus aureus and is able to connect any two proteins as long as they possess those matching target sequences. In the pentapeptide motif LPXTG, X can be any amino acid except cysteine. Sortase A is rather promiscuous with regard to the amino acid sequence directly upstream of this motif, a fact that makes it optimal for labeling applications. Even better, amino acids C-terminal of the poly-glycine motif are not constrained to a certain sequence.

Reaction

To better understand how the enzymatic reaction works it is necessary to look at the crystal structure of Sortase A. The enyzme consists of an eight-stranded β‐barrel fold structure. The active site is hydrophobic and contains the catalytic cysteine residue Cys184 as well as a key histidine residue H120 that can form a thiolate-imidazolium with the neighboring cysteine. An additional structural property that also other sortases show is the calcium binding site formed by the β3/β4 loop. The binding of a calcium ion slows the motion of the active site by coordinating to a residue in the β6/β7 loop. This helps binding the substrate and increasing the enzymatic activity nearly eightfold. When a substrate gets into the active site, the cysteine attacks the amide bond between the threonine and the glycine in the LPXTG motif. After this the protonated imidazolium serves as an acid for the departing glycine with unbound NH₂ of the former amide bond while the rest of the motif is bound to the cysteine residue. Another glycine nucleophile is then necessary in its deprotonated form to attack the thioester and re-establish an amide bond at the LPET-motif. This reaction is dead-ended if the used nucleophile is water. Due to the fact that the mechanism is based on protonated forms of the catalytic residues the reaction is quite pH-dependent. Although the Sortase A in general is relatively stable between pH 3 and 11 the reaction works best around pH 8.

Sortase variants

Due to the fact that the wildtype Sortase A shows rather slow kinetics, a pentamutant has been developed (Sortase A5M). This version of the enzyme carries mutations in P94R/D160N/D165A/K190E/K196T which lead to a 140- fold increase in activity. Thereby, reaction rates are improved even at low temperature, however, Sortase A5M is still Ca²⁺-dependent. This dependence interferes with potential in vivo usage, as the concentrations of calcium in living cells can vary considerably. Hence a sortase mutant that acts across high differences in calcium concentrations or even works completely Ca²⁺-independently would be required for in vivo applications of sortase. To attain a high yield enzyme which is also calcium-independent Ca²⁺-independent mutations were combined with the Sortase A5M resulting in Sortase A7 variants such as the Sortase A7M. The newly achieved calcium-independence of these variants enable sortase applications not only in vitro but in vivo as well.

Sortase A7M

For our project we chose to work with this optimized Sortase A7M. Its size is about 17.85 kDa and it has been shown to be stable for several weeks in the fridge at 4 °C. It also possesses the same properties of pH stability like other sortases but comes with the advantage of being calcium independent. "Sortagging" applications have included the cyclization of proteins and peptides, modification and labeling of antibodies and the synthesis of protein conjugates with drugs, peptides, peptide nucleic acids and sugars. Moreover it poses a lot of advantages for the binding of two proteins in vivo since it has relatively small tags which avoids putting too much metabolic burden on the cells when expressing the proteins of interest. This also avoids disturbing the folding of the proteins of interest and the later biological functions since the Sortase A7M is able to work under physiological conditions. Other methods like the intein-based labeling of surfaces require large fusion proteins with the intein domain which puts stress on the living cells and might cause folding and solubility issues. Another application for sortase-mediated systems is the anchoring of proteins on the cell wall of gram-positive bacteria which can be used for display of heterologous proteins. It is also possible to attach non-biological molecules to the respective tag. The accessibility and flexibility determine the ability of a sortase to recognize the sorting motif and catalyzing the transacylation.

Methods

Cloning

The methods used for cloning of the different mutants of the sortase were restriction and ligation. The Sortase A5M was cloned into pET24 vector via restriction and ligation with NdeI and SalI as restriction enzymes. The vector posesses a kanamycin resistance and the srta7m is controlled through a T7 promoter, which can be induced with Isopropyl-β-D-thiogalactopyranosid (IPTG, inductor of the lac-operon in E. coli). Sortase A7M is controlled by the same T7 promoter. Sortase A, introduced by iGEM Stockholm 2016, was cloned via Gibson assembly into PSB1C3. This backbone has a chloramphenicol resistance and is also controlled under a T7 promoter. Cloning of all products was checked via Sanger sequencing.

Expression and purification

After successfully transforming our sortase genes in BL21 cells, we inoculated 100 mL overnight cultures, with the respective antibiotic. The next day 1 L cultures were inoculated with the overnight culture to reach OD₆₀₀ = 0.1. Subsequently the cultures were incubated under constant shaking at 37 °C until they reached OD₆₀₀ = 0.6. At OD₆₀₀ = 0.6 the cultures were induced with 0.5 mL of 1 M Isopropyl-β-D-thiogalactopyranosid (IPTG). The gene expression was performed at 30 °C under constant shaking overnight. After expression of Sortase A7M, Sortase A5M, and Sortase A from Stockholm (BBa_K2144008) in BL21 cultures the cells were crushed via EmulsiFlex (Avestin) and proteins were purified through affinity chromatography via Fast Protein Liquid Chromatography (FPLC) with the ÄKTA pure (GE Healthcare, Illinois, USA). His-Tag was used for purification of Sortase A7M and Sortase A (Stockholm) and Strep-Tag II was used for purification of Sortase A5M.

SDS-Page

To verify the successful production of Sortase A7M, Sortase A5M, and Sortase A SDS-PAGEs were performed. The resulting bands were compared to the molecular weight of the different sortase variants. Also, SDS-PAGEs were completed to verify enzymatic activity in assays prior to measuring sortase properties via Fluorescence Resonance Energy Transfer )FRET).

Flourescence Resonance Energy Transfer (FRET)

To determine the kinetics of our transpeptidase variants, FRET assays were performed in 384 well-plates (dark) using a Tecan plate reader. A FRET relies on the phenomenon that an excited fluorophore (donor) transfers energy to another fluorophore (acceptor), thereby exciting it. This process only works if both fluorescent molecules are in close proximity and depend on the FRET-Pair. By transferring the energy from donor to acceptor, the donor's emission is reduced and the intensity of the acceptors emission is increased . The efficiency depends on the distance between the fluorophore, the orientation and the spectral characteristics . You can see the principle of FRET in Fig. 2.

Figure 2 : Jablonski diagram showing the energy transfer between a FRET-pair (design based on Wikipedia).

Mass Spectrometry

To estimate the product yield of catalyzed reactions by Sortase A7M we performed mass spectrometry. The tested molecules can be distinguished between products and educts due to desorption and ionization. Therefore, we used the electrospray ionization (ESI) technique for the mass spectrometry. This technique has a low resolution but is a very soft ionization method, which makes it an optimal technique for biological molecules.

Enzyme-linked Immunosorbent Assay (ELISA)

The enzyme-linked immunosorbent assay (ELISA) is an analytical assay frequently utilized for immobilization and verification of different macro molecules. Immobilizing the recognition tag of the sortase on a surface allows us to verify the coupling efficiency of Sortase A7M under certain conditions. Firstly, we functionalized paper to presenting a poly-G peptide sequence on the surface. Using the Sortase A7M, a ZZ-domain carrying a LPETG amino acid sequence is coupled to the short peptide sequence of GGGßA. The ZZ-domain itself shows high affinity to the human IgG antibody FC-domain and therefore allows the following immobilization of IgG. The secondary antibody is an anti-human IgG, Fab-specific antibody carrying the horseradish peroxidase enzyme (HRP). HRP is capable of converting 4-chloro-1-naphthol to benzo-4-chlorocyclohexandienone using hydrogen peroxide. This color reaction allows us to draw a conclusion about the previous ZZ-domain’s sortase-mediated coupling efficiency since the turnover of the HRP is directly connected to the ligated ZZ-domains.

Results

Characterization of Sortase A7M (and comparison to BBa_K3187016)

How do we measure if our purified sortases are active?

After purification of the sortases, we first performed SDS-PAGEs to verify that they are pure and monomeric. You can see in Fig. 3 that the purifications were successful. Next, we tested if the purified sortases connect two proteins that carry the important Sortase-recognition-tags, N-terminal polyG and C-terminal LPETGG. Therefore, we added the sortases to a mix of GGGG-mCherry and mCherry-LPETGG. The reactions were performed in different buffers, at different enzyme-to-substrate ratios and for different time spans. We performed an SDS-PAGE, and prior to Coomassie staining, we recorded fluorescent images of the gel. Thereby, we could identify mCherry bands in the gel.

Figure 3 : SDS-PAGE of Sortase A7M and Sortase A5M where the bands show up at approximately 15 kDa. Our estimated size for Sortase A7M was 17.85 kDa, and for Sortase A5M 18.07 kDa. This confirms the result shown on the gel, since the band of Sortase A5M is a little higher than the one of Sortase A7M.

Figure 4 : a) Fluorescence gel of the sortase-reaction of GGGG-mCherry and mCherry-LPETGG mediated by Sortase A7M incubated for 2 h and 4 h each. Reaction solutions were mixed with different ratios from enzyme to substrate concentration(1:3;1:10) and each incubated in two different buffers(Tris-HCl and Ammoniumdicarbonat). Product bands at a height of about 57 kDa can be seen in lane 4, 5, 6, 8, 9 (from left to right). The bands below the product at about 38 kDa could be semi-denatured mCherry dimers.
b) Fluorescence gel on top of the coomassie-stained gel of the sortase-reaction of GGGG-mCherry and mCherry-LPETGG mediated by Sortase A7M incubated for 2 h and 4 h each. Reaction solutions were mixed with different ratios from enzyme to substrate concentration(1:3;1:10) and each incubated in two different buffers (Tris-HCl and Ammoniumdicarbonat). Product bands at a height of about 57 kDa can be seen in lane 4, 5, 6, 8, 9 (from left to right). The bands below the product at about 38 kDa could be semi-denatured mCherry dimers. Additionally, Sortase A7M can be seen at 17 kDaA7M. The unprocessed mCherry monomers can be seen at 28 kDa.

As shown in Fig. 4, under certain conditions, a product band appeared at the expected size of 57.3 kDa (28.5+28.8 kDa). From this first activity test, we draw three conclusions:

Our purified Sortase A7M is active
The enzyme-substrate ratio affects the product yield
The duration of the reaction affects the product yield

Additionally, TRIS buffer seems to alter the coomassie staining efficiency of Sortase A7M. This endpoint measurement gave us a first impression that our Sortase A7M works nicely. Of course, we wanted to further characterize the parameters of the reaction. When we understand the sortase better, modification of our VLPs will become more straightforward.

How do we measure sortase reaction kinetics

In the above described assays, we noticed the impact of enzyme-substrate ratio and reaction duration on the overall product yield. We thought about how to further measure the kinetics of the sortase reaction. In the literature, sortase reaction kinetics are often measured by FRET-assays. Therefore, we designed a suitable FRET-assay. In the end, we came up with a new FRET pair not described in the literature to date: 5-TAMRA-LPETG and GGGG-sfGFP.

Development of a new FRET-pair

For characterization of the reaction kinetics of Sortase A7M, Sortase A5M and Sortase A (Stockholm), we decided to develop a suitable FRET-pair. In order to find an optimal FRET-pair, we first recorded an emission and absorption spectrum of 5-Carboxytetramethylrhodamin-LPETG (TAMRA) and GGGG-mCherry to verify the suitability for the FRET effect, checking for a possible overlap between the donor's emission and the acceptor's extinction.

Figure 5 : Design of a FRET-pair of 5-TAMRA-LPETG (TAMRA) and GGGG-mCherry (mCherry). In this configuration TAMRA acts as donor and mCherry as acceptor. When the two fluorophores are not linked via the substrates of the sortase only TAMRA is being excited. After sortase-mediated ligation of the two substrates mCherry is the fluorophore being excited via the FRET and the emission of mCherry intensifies. Meanwhile, the emission of TAMRA decreases.

TAMRA is a chemical fluorophore that has an absorbance maximum at 542 nm and an emission maximum at 570 nm. The terminal carboxy group of the dye was linked via a lysine linker to the LPETG sequence (see Fig. 5). mCherry has an N-terminal poly-glycine sequence and can therefore be linked to the LPETG motif of TAMRA via the Sortase A. For a sufficient FRET effect, it is also necessary that the distance between donor and acceptor is lower than the Förster radius. The Förster radius describes the distance between two fluorophores at which 50 % of the energy is transferred.
First, we wanted to identify which concentrations are needed for our experiment, then set up the reaction and measured fluorescence intensities. Over time, a decline in the emission of TAMRA can be observed as Sortase A7M/A5M is converting more educts to products.

Figure 6 : The graph shows the extinction and emission spectra of TAMRA and mCherry. Due to the large overlap of TAMRA emission and mCherry extinction it is possible to perform a FRET with this pair of fluorophores. The graph show the relative fluorescence unit (RFU[%]) in relation to the extincted/emitted wavelength [nm]. The peaks are normalized to 100 %.

The emission and extinction spectra of TAMRA and mCherry exhibit an overlap of emission of TAMRA and extinction of mCherry. Based on this output, a FRET-assay for the kinetics of Sortase A7M was performed to confirm whether the FRET-pair is working. As TAMRA is excited with light of a lower wavelength than mCherry, the former serves as FRET donor and the latter as acceptor. We chose the excitation wavelength at 485 nm to prevent unnecessary “leak” excitation of mCherry. Nevertheless, an extinction of mCherry could not be excluded and may have negative effects on the visibility of the FRET.

Figure 7 : Spectrum of the negative control of TAMRA and mCherry, without Sortase A7M, over the course of 20 min in 5 min intervals. Depicted are the emission wavelengths against the RFU.

Figure 8 : Spectrum of TAMRA and mCherry, with Sortase A7M, over the course of 20 min in 5 min intervals. Depicted are the emission wavelengths against the RFU. The sortase-mediated ligation results in a decline of both emission peaks.

The analysis of the data shown in Fig. 7 confirmed the aforementioned suspicion that mCherry is also excited at 485 nm, which makes differentiation of the fluorescence more difficult. Furthermore, Fig. 8 shows that the difference in the decline of TAMRA is not significant. Accordingly, a decline in the emission maximum of TAMRA over time is also visible in the negative control. One reason might be bleaching of TAMRA through the excitation by the laser. Nevertheless, conversion by the Sortase A7M can be observed by comparing the results with the negative control.

Figure 9 : Sortase reaction in TAMRA mCherry FRET after subtracting the negative control. Depicted is the difference in RFU over time [min]. Within the first 20 min of the substrate conversion is the quickest. At 30 min a plateau is reached. After 60 min starts catalyzing the reverse reaction. The mean ΔRFU value was normalized to zero for better visualization.

To confirm the functionality of the Sortase A7M, another more sufficient FRET-pair was developed. The measured absorbance and emission spectra indicated that TAMRA and superfolder green fluorescence protein (sfGFP) are a possible FRET-pair. The sfGFP has an N-terminal polyglycine sequence and can therefore be linked to TAMRA with the sorting motif, in the same way as mCherry was connected. However, the small overlap between the extinction spectra of sfGFP and TAMRA could solve the previous “simultaneous excitation” problem we observed for the mCherry-TAMRA FRET-pair. Because of the lower excitation maximum of sfGFP compared to TAMRA, sfGFP was chosen as donor and TAMRA as acceptor. sfGFP was excited at 465 nm to minimize the unnecessary leak excitation of sfGFP.

Figure 10 : The graph shows the extinction and emission spectra of TAMRA and mCherry. Due to the large overlap of sfGFP emission and TAMRA extinction it is possible to perform a FRET with this pair of fluorophores. The graph show the relative fluorescence unit (RFU[%]) in relation to the extincted/emitted wavelength [nm]. The peaks are normalized to 100 %.

Figure 11 : Design of a FRET-pair of 5-TAMRA-LPETG (TAMRA) and GGGG-sfGFP (sfGFP). In this configuration sfGFP acts as donor and TAMRA as acceptor. When the two fluorophores are not linked only sfGFP is being excited. After sortase-mediated ligation of the two substrates, TAMRA is the fluorophore being excited via FRET and the emission of TAMRA intensifies. Meanwhile, the emission of sfGFP decreases.

The transfer of energy from sfGFP to TAMRA can be seen by the decrease in emission of sfGFP and increase in emission from TAMRA. Compared to TAMRA as an acceptor, the sfGFP bleaches significantly less and is consequently more suitable as a donor for FRET. Furthermore, the afore mentioned problem of simultaneous donor and acceptor excitation seems to be solved. It seems that we have found a FRET-pair with superior properties.

Figure 12 : Spectrum of the negative control of TAMRA and sfGFP, without Sortase A7M, over the course of 25 min in 5 min intervals. Depicted are the emission wavelengths against the RFU.

Figure 13 : Spectrum of TAMRA and sfGFP, with Sortase A7M, over the course of 25 min in 5 min intervals. Depicted are the emission wavelengths against the RFU. The sortase-mediated ligation results in a decline of both emission peaks.

Due to the collected data of both FRET-pairs we decided to use the TAMRA-LPETG and GGGG-sfGFP FRET-pair for further characterization of our Sortase A variants. Two reasons justify this decision:

TAMRA bleaches stronger than sfGFP when excited with a laser.
The spectral overlap between TAMRA and mCherry disturbs “clean” energy transfer, thus the FRET-effect would be less visible and could not be used for analysis of the sortase-mediated reaction.

For recording of sortase reaction parameters we recommend using the FRET-pair sfGFP-TAMRA. As this pair of fluorophores proved to have near perfectly aligned spectra and since the bleaching effect is visibly lower on sfGFP than on TAMRA, we chose to use this FRET-pair in most of our following assays. Nevertheless, we do not rule out the use of TAMRA-mCherry as a FRET-pair since we used it in several FRET-assays as well.

Figure 14 : Animation of Sortase A7M enzyme kinetics over the course of 3 h. The reaction speed increases radically in the beginning moving from RFU 8000 to RFU 6000 at λ = 550 nm where a plateau is reached (blue). The negative control (orange) is also reduced in its RFU due to bleaching. Nevertheless, a peak at λ = 580 nm arises already after short reaction time. This peak indicates the successful Fluorescence Resonance Energy Transfer.

Why are enzyme-substrate ratio and duration important parameters of the sortase reaction?

In one of our first FRET experiments, we addressed the simple theory: More sortase in the reaction mix improves the initial product formation. For this, we used the TAMRA-LPETG : GGGG-mCherry FRET-pair. We measured the FRET change over time in a multiwell platereader (Fig. 15).

Figure 15 : Reaction kinetics of Sortase A7M in different concentrations at same level of substrate concentration.

However, in this assay we observed a striking feature of the sortase reaction. In the reaction with more Sortase A7M present, the FRET change started to decrease after a certain maximum was reached! We suspected some kind of dead-end product formation, as the sortase does also catalyze the reverse reaction of product to educts. Therefore, the overall reaction duration is a very important parameter. We gathered more details about the role of the reverse reaction during our comparison of Sortase A7M and Sortase A5M. Just keep reading if you want to know more!

Who wins - Sortase A7M or Sortase A5M

In our introduction we described that Sortase A7M and Sortase A5M are both fascinating enzymes, although each of them has a unique „selling point“. Sortase A5M is faster, whereas Sortase A7M is Ca²⁺-independent. We confirmed both of these points in extensive FRET-assays. According to the literature, Sortase A5M works best with a Ca²⁺-concentration of 2 mM. In contrast, Sortase A7M is a calcium-independent mutant of the enzyme. Moreover, Ca²⁺ even seems to inhibit this enzyme variant slightly .

Firstly, we confirmed that in contrast to Sortase A5M, Sortase A7M is Ca²⁺-independent. The results are shown in Fig. 16 Sortase A7M also works in presence of Ca²⁺, but these FRET experiments made us suspect that Ca²⁺ may even inhibit Sortase A7M.

Figure 16 : Sortase A7M FRET-assay of connecting TAMRA-LPETG with GGGG-sfGFP with and without Ca²⁺. The Sortase A7M reaction was measured with 6 mM Ca²⁺ every minute. Sortase A7M reaction without Ca²⁺ was measured every three minutes. It is shown that this enzyme variant works with calcium and without calcium as well, although it seems like Sortase A7M is slightly inhibited due to the presence of calcium which explains why the left graph is lower than the right one.

Secondly, we confirmed that Sortase A5M is inactive if Ca²⁺ is absent, which can be seen in Fig. 17. As expected, Sortase A5M shows increasing enzymatic activity with increasing Ca²⁺ levels. The reaction runs fastest with 2 mM Ca²⁺, and the maximal FRET change (in terms of ΔRFU) is reached after 37.5 min. Strikingly, the FRET change decreases afterwards. We observed this phenomenon before and assume this to be due to dead-end product formation caused by the reverse reaction.

Figure 17 : Both figures show Sortase A5M FRET-assay connecting TAMRA-LPETG and GGGG-sfGFP with different Ca²⁺-concentrations. The right graph is showing that Sortase A5M does not work without calcium. The negative ΔRFU measurements are probably caused by measuring errors by the Tecan platereader.

According to the results of this assay, Sortase A7M is definitely Ca²⁺-independent, since it shows linking activity without calcium in the vicinity. The enzyme mutant also works in presence of Ca²⁺ (Fig. 17), but these FRET experiments made us suspect that Ca²⁺ may even inhibit Sortase A7M, since it shows less activity with calcium around than without calcium.

To better address this question, an ELISA was performed. Therefore, a piece of paper functionalized with GGGβA was connected to a protein domain, which binds antibodies to the LPTEG-tag. The results are shown in Fig. 18.

Figure 18 : Absorbance at 450 nm at a temperature of 23.8˚ C
. In well 1 additional 10 mM Ca²⁺ were added which was not the case in well 2. Well 3 serves as a negative control since the enzyme is missing in this reaction

As shown in Fig. 18, the highest absorption was measured in well 2. Thus, Sortase A7M works more efficiently when no Ca²⁺ is around. The absorption is also relatively high for the negative control, which can be explained by poor washing before the substrate for Horeseradish peroxidase (HPR) was added. This assay shows the functionality of Sortase A7M even in context of surfaces since we confirmed that Sortase A7M is able to connect tags attached to paper. This shows that the surface structure is not a relevant factor for the enzyme.

Figure 19 : Comparison of the reaction speed of Sortase A5M with Ca²⁺ and Sortase A7M without Ca²⁺.

When we compare the reaction speed of Sortase A5M and Sortase A7M, Sortase A5M is the clear winner (see Fig. : 19). However, this means of course that the reverse reaction is also faster in the case of Sortase A5M. Consequently, Sortase A7M is the best variant for in vivo modification of our VLPs as it is Ca²⁺-independent. On the other hand, Sortase A5M is a suitable enzyme variant for in vitro modification due to its high efficiency.

What about other substrates?

Primary Amines

The literature describes Sortase A7M as somewhat "promiscuous" towards other substrates than GGGG(polyG) as long as the substrate possesses a primary amine. To confirm this, we performed additional assays with other substrates in the lab of Prof. Kolmar. The Sortase A7M used for this assay was stored in the fridge at 4 °C for two weeks. The substrates were TAMRA with a KLPETG bound to TAMRA via the lysine side chain and 3-azidopropanamine as the example for a primary amine. The reaction was performed for two hours at 37 °C. It was then analyzed by electron spray ionization mass spectrometry (ESI-MS) (Fig. 20).

Figure 20 : Mass spectrum before the reaction of TAMRA-LPETG with 3-azidopropanamine showing the educt at 1054 g/mol.

Fig. 20 shows the educt-peak in the mass spectrum. TAMRA with the LPETG-tag weighs 1054 g/mol. Shown above in green is the single charged molecule at 1054.27 g/mol and the double charged molecule at 528.75 g/mol.

Figure 21 : Mass spectrum after the reaction of TAMRA-LPETG with 3-azidopropanamine showing the product at 1079.37g/mol.

Fig. 21 shows the product-peak in the mass spectrum. The primary amine that was taken as an example has a molecular weight of 100 g/mol. After the reaction the glycine of the LPETG-tag has been removed and therefore the product only consists of TAMRA-KLPET-3-azidopropanamine. When adding the two molecular weights and subtracting the weight of the glycine it adds up to a total weight of 1078 g/mol which can be seen in the single loaded 1079.37 g/mol peak (Fig. 21), since the ESI-MS we used has a small error margin. The peak in black again is the double loaded peak at 541.55 g/mol. This clearly shows that the sortase reaction took place. Furthermore, we can conclude that the Sortase A7M accepts any primary amine as a substrate. However, mass spectrum does not show the ratio of educt and product, which is why we cannot estimate whether the turnover is as high as when using a polyG-tag as substrate. Additionally this assay confirms our suspicion that the Sortase A7M is stable at 4 °C and still functional if stored at said temperature for at least two weeks.

Yield

For the characterization of Sortase A7M an assay was designed to show the coupling efficiency between the TAMRA-LEPTG and the tetrapeptide GGG-Beta-Alanin (GGGβA) catalyzed by the Sortase. The Sortase reaction was performed for 1h at 30˚C and was stopped by enzyme separation through centrifugal filtration. For analysis mass spectrometry (ESI-MS) was used. The mass spectrometry enables differentiation between products and educts. It allowed us to make an estimate of the product yield. The calculated theoretical molecular masses are 1054 g/mol for TAMRA and 1240 g/mol for TAMRA-LPETGGGβA. Therefore, peaks are expected at mass/n, with n ∈ N. By comparison of the number of corresponding peaks, estimation of the product yield is possible as both molecules possess the same amount of ionizable groups and thus the difference in the ionizability of both molecules is negligible.

Figure 22 : Mass spectrum of the sortase-mediated ligation of TAMRA-LPETG and GGGβA showing the difference in height of the educt-peak and the product-peak which can be used to estimate the yield of our Sortase A7M.

In Fig. 22 the 621.56 peak can be assigned to the TAMRA-LEPTGGGβA and the 528.85 to the TAMRA-LPETG. The count ratios of the two molecules mentioned show an excess of the product.

Is Sortase A7M able to attach cargo to P22 coat protein?

We performed the linking reaction with CP-LPETGG and GGGG-mCherry as substrates and applied them to an SDS-PAGE. We saw products at the expected size (28 kDa + 49 kDa = 77 kDa) thus the requirement is fulfilled. However, a lot of additional bands appeared that we did not expect. These bands also appeared when only Sortase A7M and CP were mixed.

Figure 23:

a) Sortase A7M band is at expected height (17.85 kDa). The two negative controls containing only GGGG-mCherry (28 kDa) and CP-LPETGG (49 kDa) at the expected respective heights. b) Shown are sfGFP-SP and CP-LPETGG each incubated with both Sortase A7M and Sortase A5M. Both gels display multimers when coat and a sortase variant are in a sample together.

To investigate this issue, we had a look at the literature and found a matching description in the publication of Patterson et al.. They performed a similar experiment with P22 capsid proteins and observed the same multimers in their SDS-PAGEs . Comparing both SDS-PAGEs, we came to the following assumption:

Because of the promiscuity of Sortase A7M to accept primary amines as substrates, as we discussed previously, the formation of CP multimers occurs, unspecifically catalyzed by Sortase A7M.

Parallel to these experiments, we successfully modified the exterior of pre-assembled VLPs in vitro (VLP assembly). These modified VLPs were homogenous and overall correctly assembled. Therefore, we conclude that the described multimer problem only occurs when Sortase A7M encounters free CP.

Does methionine affect Sortase linking?

Sortase A7M preferably attaches N-terminal poly-G to C-terminal LPETGG. However, the first amino acid of a protein is methionine (to be specific, formylmethionine in bacteria). For our constructs that possess N-terminal polyG-tags, we have to ask ourselves the question: If the initial methionines are not cleaved off after the proteins have been produced, will this interfere with the Sortase reaction?

To investigate this, we cloned and purified another protein: TVMVsite-GGGG-mCherry. This protein can be treated with TVMV-protease, leading to *GGGG-mCherry. This *GGGG-mCherry was then compared to (M)GGGG-mCherry we used in all previous assays.

To investigate this, we cloned and purified two other proteins: TVMVsite-GGGG-mCherry and TEVsite-GGGG-sfGFP. Then we treated these proteins with the respective proteases, resulting in *GGGG-mCherry and *GGGG-sfGFP. Following this *GGGG-mCherry was then compared to (M)GGGG-mCherry which we used in all previous assays. Assays were also conducted on Fig. 24 the processed *GGGG-sfGFP substrate. Fig. 24 confirmed our assumptions that the unprocessed substrate cannot be linked to the sorting motif via Sortase A7M. Subsequently, *GGGG-sfGFP (after protease digest) demonstrate successful linkage via sortase-mediated ligation.

Due to these findings we modified our VLPs with *GGGG-sfGFP.

Figure 24 : Sortase-mediated ligation of TAMRA-LPETG and GGGG-sfGFP (with TEV cleavage site) one cut with TEV protease and one not. The sample with the unprocessed substrate shows no increase in RFU. In contrast the processed substrate shows a clear increase in delta RFU. After 90 min the reverse reaction begins.

We performed FRET-assays with TAMRA-LPETG and either of the following reaction partners:

(M)GGGG-mCherry, a protein sample that might still carry an N-terminal methionine
*GGGG-mCherry that does not carry any additional N-terminal residue

Before the FRET-assay was started, we adjusted the mCherry-concentrations of both fluorescent protein solutions to the same level. To do so, we diluted them until both showed the same fluorescence at 610 nm.

Figure 25: FRET of the sortase reaction connecting TAMRA-LPETG and GGGG-sfGFP mediated by Sortase A7M. The concentration of the Sortase A7M was kept at the same level why the concentration of sfGFP was either 7.8 mM or 1 mM. The graphs show that the reverse reaction happens earlier if if the GGGG-substrate concentration is lower.

Strikingly, only the (M)GGGG-mCherry construct showed a clear decrease in delta RFU after the maximum delta RFU was reached (at about 160 min).

Figure 26 : Sortase-mediated ligation of TAMRA-LPETG and GGGG-mCherry one cut with TVMV protease and one with a methionin infront of the GGGG-tag. As visible the reverse reaction happens earlier if the methionine is not cleaved of the GGGG-tag. The delta RFU is referring to the negative controls without Sortase A7M.

We assume the following: Although we adjusted the overall mCherry concentration by fluorescence, we cannot determine the absolute amount of MGGGG-mCherry in the (M)GGGG-mCherry sample. However, if this amount was relatively high, the effective substrate concentration that could enter the sortase reaction would be low. That is because MGGGG is a worse sortase substrate than GGGG – if any at all. If we furthermore consider that a low substrate concentration correlates with a faster reverse reaction, we can explain the observed decrease in delta RFU for the (M)GGGG-mCherry sample that contrasts the delta RFU trend of the *GGGG-mCherry sample.

On this basis we can assume that a certain, yet unknown portion of the (M)GGGG-mCherry sample still carries an N-terminal methionine.

These FRET-assays let us assume that methionine disturbs or at least interferes with the sortase reaction mechanism. Indeed, our modeling suggests that methionine affects the interaction of polyG and the flexible loop near the active site of Sortase A7M. Click here if you want to know more about our modeling results!

This strengthens our hypothesis: If there is any amino acid in front of the poly-glycine sequence, substrate binding to Sortase A7M is negatively influenced.

[edit]

Part:BBa_K3187005