Plasmid

Part:BBa_K5351006

Designed by: Aimi Ma   Group: iGEM24_FDfzSH   (2024-09-02)
Revision as of 06:37, 29 September 2024 by Zmy0227 (Talk | contribs)


X-3-XI



Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    INCOMPATIBLE WITH RFC[12]
    Illegal NotI site found at 3656
    Illegal NotI site found at 4104
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal XhoI site found at 3877
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal AgeI site found at 5120
  • 1000
    INCOMPATIBLE WITH RFC[1000]
    Illegal BsaI site found at 2651
    Illegal BsaI.rc site found at 132
    Illegal SapI site found at 284
    Illegal SapI.rc site found at 1629


BBa_K5351006 Documentation

Construction Design

X-3-XI (BBa_K5351006) is constructed by integrating the PsXI (BBa_K5351005) gene into the X-3 (BBa_K4845003) site. A biotech company provides the backbone plasmid of the X-3 integration site. The TEF1 promoter (BBa_K4703017) and ADH1 terminator (BBa_K3803006) join the PsXI gene.

X-3-XI is constructed by integrating the PsXI gene into the X-3 site. A biotech company provides the backbone plasmid of the X-3 integration site. The PsXI gene is joint by TEF1 promoter and ADH1 terminator.

Figure 1. The plasmid map of X-3-XI
Figure 1. The plasmid map of X-3-XI

Engineering Principle

X-3-XI (BBa_K5351006) is constructed by integrating the PsXI (BBa_K5351005) gene into the X-3 (BBa_K4845003) site. The TEF1 promoter (BBa_K4703017) and ADH1 terminator (BBa_K3803006) join the PsXI gene.

Experimental Approach

The pHCas9 plasmid was used as a template, and primer pair TEF1p-F1/ TEF1p-XI-R1 amplified the TEF1 promoter with a size of 430 bp; the FDP-PsXI plasmid containing the PsXI gene was used as a template, and primer pair XI-TEF1p-F1/ XI-ADH1t-R1 amplified the PsXI gene sequence with a size of 1354 bp. The brewer's yeast colonies or genome as a template, primer pair ADH1t-XI-F1/ ADH1t-R1 amplified ADH1 terminator with a size of 214 bp. Figure 2 shows the band consistent with the target size, indicating successful amplification.

Figure 2. Gel electrophoresis validation of gene amplification of TEF1 promoter, PsXI, and ADH1 terminator
Figure 2. Gel electrophoresis validation of gene amplification of TEF1 promoter, PsXI, and ADH1 terminator

The above three fragments were processed by overlap PCR using primer TEF1p-F1/ ADH1t-R1. The size of the fragment was 1920 bp. Figure 3 shows the band consistent with the target size, indicating the overlap PCR is successful.

Figure 3. Overlap PCR results of TEF1-PsXI-ADH1
Figure 3. Overlap PCR results of TEF1-PsXI-ADH1

The 1920 bp fragment was recycled and ligated into the PsXI gene sequence, also using the primer TEF1p-F1/ Xho1. The 1920 bp fragment was recycled using Sgs1+Xho1 double digestion and ligated into the X-3 locus integration backbone plasmid. It was also double digested using Sgs1+Xho1. Figure 4 shows the band consistent with the target size. The enzyme cutting is successful.

Figure 4. Results of enzyme cutting of X-3 backbone and TEF1-PsXI-ADH1
Figure 4. Results of enzyme cutting of X-3 backbone and TEF1-PsXI-ADH1

The plasmid is transformed into DH5α and cultivated on LB-Amp plates. Figure 5 shows the presence of single colonies on the plate.

Figure 5. Transformation plate of X-3-XI
Figure 5. Transformation plate of X-3-XI

Colonial PCR was carried out using the primers grna-HYG-baseplasmid-seq-7/ XI-ADH1t-R1. The target band was 2065 bp. Figure 6 shows the band consistent with the target size.

Figure 6. Gel electrophoresis validation of X-3-XI
Figure 6. Gel electrophoresis validation of X-3-XI

Sequence using the primers grna-HYG-baseplasmid-seq-7 and h-x-3d-bb-r1. According to the results shown in Figure 7, the construction of the X-3-XI plasmid is successful.

Figure 7. Sequencing map of X-3-XI
Figure 7. Sequencing map of X-3-XI

Characterization/Measurement

X-3-XI plasmid is prepared for a second round of PsXI gene integration into the X-3-XI to produce a plasmid with two copies of the PsXI gene, which would result in 8 copies of the gene in the yeast.

1. Yeast transformation

a) xyl-8XI

First, we transferred the pHCas9-Nourse plasmid into the xyl-WT strain and screened the YPD-Nourse resistance plate to obtain xyl-Cas9 positive transformers. Then the X-3-XI-2-gRNA-HYG plasmid and the target gene fragment containing 2 copies of the PsXI expression frame were transferred into the xyl-Cas9 strain, and the positive invert was screened on the YPD-Nourse-HYG resistance plate. PsXI integration was then verified by colony PCR with primers GAP-XI-F1\h-x-3d-bb-r1 and GAP-XI-F1\h-xi-2d-bb-r1. Agarose gel electrophoresis results (Figure 8) showed that the target band expanded 900 bp bands, as expected, indicating that we successfully integrated 8 copies of PsXI genes and named the strain xyl-8XI.

Figure 8. PCR and colony map of xyl-8XI
Figure 8. PCR and colony map of xyl-8XI

b) xyl-8XI-nfs1

After constructing strain xyl-8XI, we further mutated the nfs1 gene, mutated Ile at site 492 to Asn, and constructed strain xyl-8XI-NFS1. We introduced PGMC-GRNA-NFS1MU and the amplified homologous arm fragment into the prepared xyl-8XI receptive cells and cultured them at 30 °C. Subsequently, colony PCR was performed with primer NFS1 (1513-1535) -F/ NFS1-DN (2044-2072) -R. The result of agar-gel electrophoresis (Figure 9) showed that the target band was amplified by about 495 bp, as expected, indicating that we successfully integrated 8 copies of the PsXI gene, and the Ile mutation at site 492 of the NFS1 gene was changed to Asn, and the resulting strain was named xyl-8XI-nfs1.

Figure 9. PCR validation diagram and colony diagram of xyl-8XI-nfs1
Figure 9. PCR validation diagram and colony diagram of xyl-8XI-nfs1

c) xyl-8XI-ΔISU1

After the construction of strain xyl-8XI, we further performed gene knockout on the ISU1 gene to construct strain XYL-8XI-ΔISU1. We introduced pSCm-gRNA-ΔISU1 and the amplified homologous arm fragment into the prepared xyl-8XI receptive cells and cultured them at 30 °C. Colony PCR was performed with primer jd-ISU1 (282-308) -F/ jd-ISU1 (1209-1232) -R, and the final strain was named xyl-8XI-ΔISU1. The results of agar-gel electrophoresis (Figure 10) showed that the target band was amplified by about 451 bp, as expected, indicating that we successfully integrated 8 copies of the PsXI gene and knocked out the ISU1 gene, and the resulting strain was named xyl-8XI-ΔISU1.

Figure 10. PCR and colony map of xyl-8XI-ΔISU1
Figure 10. PCR and colony map of xyl-8XI-ΔISU1

d) xyl-8XI-nfs1-ΔISU1

After constructing strain xyl-8XI-nfs1, we further performed gene knockout on the ISU1 gene to construct strain XYL-8XI-NFS1-ΔISU1. We introduced pSCm-ΔISU1 and homologous arm fragments into xyl-8XI-nfs1 receptor cells and cultured them at 30 °C. Monoclonal colonies were selected for colony PCR verification using primer jd-ISU1 (282-308) -F/ jd-ISU1 (1209-1232) -R. Results of agar-gel electrophoresis (Figure 11) showed that the target band was amplified by about 451 bp, as expected, indicating that we successfully integrated 8 copies of PsXI genes. The Ile at site 492 of the NFS1 gene was mutated into Asn, and the ISU1 gene was knocked out. The final strain was named wx-xyl-8XI-nfs1-ΔISU1.

Figure 11. Colony PCR and colony map of xyl-8XI-nfs1-ΔISU1
Figure 11. Colony PCR and colony map of xyl-8XI-nfs1-ΔISU1

2. Functional Test

a) Solid medium assay for determining strains' xylose metabolism

The strains Xyl-8XI, Xyl-8XI-NFS1, Xyl-8XI-ΔISU1, Xyl-8XI-NFS1-ΔISU1, and XYL-8XI-NFS1-ΔISU1 were evaluated for their xylose utilization capabilities, and their growth performances were compared. The xylose plate test results (Figure 12) revealed that the XYL-8XI-NFS1 strain exhibited robust growth even under xylose dilutions of 10-12, surpassing the performance of xyl-8XI, Xyl-8XI-ΔISU1, and xyl-WT strains.

This observation suggests that the mutation of the NFS1 gene positively influenced xylose metabolism. Specifically, xylose metabolic capacity was ranked as follows: XYL-8XI-NFS1 > XYL-8XI-NFS1-ΔISU1 > xyl-8XI > XYL-8XI-ΔISU1 > xyl-WT. These results indicated that NFS1 gene mutation significantly improved xylose metabolic capacity, while ISU1 gene knockout had a specific effect on xylose metabolism, but it was not as significant as NFS1 mutation. Through this experiment, we have identified promising targets for xylose metabolism enhancement.

Figure 12. The xylose plate detected xylose metabolism.
Figure 12. The xylose plate detected xylose metabolism.

b) Using HPLC to analyze the fermentation of strains

High-performance liquid chromatography (HPLC) testing will further quantitatively analyze the xylose metabolism to verify the actual performance of different strains in xylose metabolism. The strains were fermented in a YPDX medium to evaluate their actual xylose metabolism efficiency. The results of HPLC will further support the advantages of NFS1 mutant strains in xylose metabolism, and these results provide new ideas and a theoretical basis for yeast strains to optimize xylose utilization.

The concentrations of xylose were measured using an HPLC system (Waters e2695) equipped with an Aminex HPX-87H ion exchange column (300 × 7.8 mm; Bio-Rad) at 35°C and a Waters 2414 refractive index detector. Sulfuric acid (5 mM) served as the mobile phase with a flow rate of 0.6 ml min−1. The biological company conducted the specific testing.

From Figure 13, it is evident that introducing xylose isomerase into different parent strains resulted in enhanced xylose metabolism capabilities. Further validation of the NFS1 mutant strains' advantages in xylose metabolism was achieved through the actual xylose metabolism performance in the fermentation broth. The strain with the fastest xylose utilization rate nearly depleted the xylose in the medium within 40 hours. Additionally, observations on strain growth revealed that the modified strains exhibited minimal impact on growth, with an earlier onset of exponential growth. This rapid growth of the strains also positively influenced xylose utilization.

Figure 13. Comparison of xylose metabolism and growth status of the modified strains
Figure 13. Comparison of xylose metabolism and growth status of the modified strains
(a: Xylose metabolism profiles of different strains; b: Growth status comparison among different strains)

Ethanol Production

The ultimate goal of enhancing xylose utilization in our engineered strains is for ethanol production. Therefore, we also measured the ethanol content in the fermentation broth after fermentation to assess the potential of our strains in the field of second-generation biofuel ethanol production. Experimental results, as shown in

Experimental results, as shown in Table 1, indicate a significant improvement in ethanol production capacity in the engineered strains. Notably, our strain xyl-8XI-nfs1 exhibited a 5.2-fold increase in ethanol production compared to the parental strain, reaching 662.18 mg/L. This result further validates the success of our genetic modifications to the strains.

Table 1. The ethanol production levels of different strains (48 h)
Strains Ethanol concentration (mg/L)
xyl 106.72
xyl-8XI 298.74
xyl-8XI-nfs1 662.18
xyl-8XI-ΔISU1 367.16
xyl-8XI-nfs1-ΔISU1 307.10

Discussion

In our experiment, we utilized YPDX medium rather than glucose and xylose derived from lignocellulosic biomass hydrolysate. Therefore, in the future, we will need to ferment with actual hydrolysate, which contains not only glucose and xylose but also a significant amount of inhibitors generated from lignin decomposition. This poses specific requirements for the stress tolerance of our strains [2,3]. We aim not only to enhance the strains' xylose utilization capability but also to increase their robustness in the hydrolysate, ultimately facilitating improved production of second-generation biofuel ethanol.

References

  1. Wei Fangqing, Li Menglei, Wang Ming, et al. A C6/C5 co‐fermenting Saccharomyces cerevisiae strain with the alleviation of antagonism between xylose utilization and robustness [J]. GCB Bioenergy, 2020, 13(1): 83–97.
  2. Brat D, Boles E, Wiedemann B. Functional expression of a bacterial xylose isomerase in Saccharomyces cerevisiae [J]. Applied Microbiology and Biotechnology, 2009, 75: 2304-2311.
  3. Liu CG, Xiao Y, Xia XX, et al. Cellulosic ethanol production: Progress, challenges and strategies for solutions [J]. Biotechnol Adv, 2019, 37(3): 491-504.

[edit]
Categories
Parameters
None