Part:BBa_K5490017
Ca-Dependent Synthetic NF-AT
Is a synthetic NFAT transcription factor, after an increase in calcium, will enter the nucleus and bind to a specific minimal promoter. It uses the TALE system for binding to DNA and VP16 as the activation domain. Under homeostatic conditions, it is anchored in the plasma membrane via the KRφ peptide. It has both Myc and FLAG tags for immunohistochemical analysis and Western blotting
Sequence and Features
- 10INCOMPATIBLE WITH RFC[10]Illegal EcoRI site found at 723
Illegal EcoRI site found at 766
Illegal EcoRI site found at 1926
Illegal SpeI site found at 741
Illegal PstI site found at 1744
Illegal PstI site found at 1998 - 12INCOMPATIBLE WITH RFC[12]Illegal EcoRI site found at 723
Illegal EcoRI site found at 766
Illegal EcoRI site found at 1926
Illegal NheI site found at 1315
Illegal SpeI site found at 741
Illegal PstI site found at 1744
Illegal PstI site found at 1998
Illegal NotI site found at 715 - 21INCOMPATIBLE WITH RFC[21]Illegal EcoRI site found at 723
Illegal EcoRI site found at 766
Illegal EcoRI site found at 1926
Illegal BamHI site found at 1793
Illegal BamHI site found at 4543
Illegal XhoI site found at 2032 - 23INCOMPATIBLE WITH RFC[23]Illegal EcoRI site found at 723
Illegal EcoRI site found at 766
Illegal EcoRI site found at 1926
Illegal SpeI site found at 741
Illegal PstI site found at 1744
Illegal PstI site found at 1998 - 25INCOMPATIBLE WITH RFC[25]Illegal EcoRI site found at 723
Illegal EcoRI site found at 766
Illegal EcoRI site found at 1926
Illegal SpeI site found at 741
Illegal PstI site found at 1744
Illegal PstI site found at 1998
Illegal NgoMIV site found at 1198
Illegal NgoMIV site found at 1218
Illegal NgoMIV site found at 1234
Illegal NgoMIV site found at 1699
Illegal NgoMIV site found at 1983 - 1000COMPATIBLE WITH RFC[1000]
Usage and Biology
This chimeric protein is composed of three main components:
NFAT Transcription Factor cn Domain:
In its natural state, NFAT contains two Nuclear Localization Signals (NLS) that enable nuclear translocation. However, in this engineered version, one NLS has been removed, leaving only a single NLS to reduce background transcription. The NFAT domain is activated through phosphorylation by calcineurin in response to calcium signaling. This domain is critical for calcium-dependent activation in cellular processes, as the increase in cytosolic calcium activates calmodulin, which, in turn, activates calcineurin.
TALE Binding Domain and Calcineurin Fusion:
The TALE domain, which recognizes specific DNA sequences, is fused to the calcineurin domain via a GS10 flexible linker. The TALE sequence has high affinity for 10 TALE binding sites, which can be placed at various positions within the DNA, such as upstream of the TATA box to activate transcription of target genes.
VP16 Activation Domain and KRφ Peptide:
Transcription activation is achieved through the VP16 activation domain, which recruits the necessary cellular machinery, such as RNA polymerase II, to the promoter region. To prevent background transcription, a KRφ peptide is fused to the C-terminus of the protein, which anchors the protein to the inner plasma membrane. Upon elevated calcium levels, the protein is released from the membrane and translocates to the nucleus via the remaining NLS, initiating transcription. After calcium levels normalize, the protein is dephosphorylated and returns to the cytosol, where it re-anchors to the membrane, resetting for further activation.
The chimeric protein is also tagged at the N-terminus with Myc and FLAG tags to facilitate detection and purification using techniques like Western blotting, immunohistochemistry, and affinity purification. Overexpression of this chimeric protein is recommended to achieve robust promoter activation and significant transcriptional output
Tale "Highly specific DNA sequences, known as TALE-binding sites, are engineered to have strong affinity for TALE proteins, which are designed to recognize specific nucleotide sequences. These binding sites can be inserted at precise locations within the genome to guide synthetic proteins to specific loci. For example, in the case of minimal promoters, TALE-binding sites can be positioned upstream of the TATA box to enhance the targeted binding of transcription factors containing the corresponding TALE domains.
TALEs (Transcription Activator-Like Effectors) are a fascinating system, first characterized in plant pathogens, and in many ways, they share similarities with the CRISPR-Cas9 system, serving as its predecessor. TALEs are modular and can be customized to target any DNA sequence by modifying specific amino acids. By fusing TALEs with various proteins, such as nucleases, they can be used as powerful genetic engineering tools to cut target DNA, or as activators or inhibitors to regulate specific regions of the genome.
The core of the TALE system consists of 33 to 35 amino acid repeats, with the specificity for DNA binding determined by the 12th and 13th residues of each repeat. These two residues form the Repeat-Variable Diresidue (RVD), which dictates which nucleotide the repeat will bind to:
NI → binds to Adenine (A)
HD → binds to Cytosine (C)
NG → binds to Thymine (T)
NN → binds to Guanine (G) (and sometimes Adenine)
By assembling these repeats, each of which targets a specific nucleotide, TALEs can be designed to bind almost any sequence of choice. Furthermore, one TALE sequence can target multiple TALE binding sites, provided the proximity between the sites is sufficiently low. These binding sites can be positioned anywhere, whether in central or peripheral DNA regions. By assembling these repeats, each of which targets a specific nucleotide, TALEs can be designed to bind almost any sequence of choice. Furthermore, one TALE sequence can target multiple TALE binding sites, provided the proximity between the sites is sufficiently low. These binding sites can be positioned anywhere, whether in central or peripheral DNA regions.
In this particular case, a TALE sequence is fused with the NFAT transcription factor to bind to 10 TALE binding sites upstream of a minimal promoter. Upon receiving a stimulus, this setup activates transcription with high specificity
Zhang S, Chen H, Wang J. Generate TALE/TALEN as Easily and Rapidly as Generating CRISPR. Mol Ther Methods Clin Dev. 2019 Feb 19;13:310-320. doi: 10.1016/j.omtm.2019.02.004. PMID: 30923728; PMCID: PMC6423989.
Meško M, Lebar T, Dekleva P, Jerala R, Benčina M. Engineering and Rewiring of a Calcium-Dependent Signaling Pathway. ACS Synth Biol. 2020 Aug 21;9(8):2055-2065. doi: 10.1021/acssynbio.0c00133. Epub 2020 Jul 20. PMID: 32643923; PMCID: PMC7467823.
Structural Design and Expiraments
Introduction to the Project
When performing immunocytochemistry on the original plasmid pCMV-MycNFAT provided by Professor Meško and her team, significant background noise was observed. In contrast, the production of NFAT was successfully detected via Western blot analysis. To address the background issue, we decided to add a FLAG tag to the N-terminus of the Myc tag through subcloning. For this purpose, we utilized the pCMV-FLAG-TRIM32 construct, which was readily available in the lab. To facilitate the subcloning process, it was necessary to remove the TRIM32 sequence downstream of the FLAG tag while extracting the NFAT insert from the original construct. We needed to identify suitable enzymes to maintain directionality and preserve the open reading frame (ORF). We developed two different strategies to achieve this outcome.
Strategy 1: Blunt-End Cloning
Insert Preparation:
We identified a HindIII site upstream of the NFAT insert, which will be used for blunt-end cloning, and an XbaI site downstream to ensure directionality.
Vector Preparation:
For the vector, we located an XhoI site upstream of the TRIM32 gene for blunt-end cloning and an XbaI site downstream to maintain directionality. Strategy 2: Partial Digestion Cloning
Insert Preparation:
We first identified a BglII site at the borders of the NFAT insert; however, an additional BglII site was present within the NFAT sequence, necessitating a partial digestion.
Vector Preparation:
For the vector, we identified a BamHI site at the borders of the TRIM32 gene. BamHI is isoschizomeric to BglII, but it cuts within the TRIM32 gene, which is acceptable as we only require the backbone from this construct.
Building a new composite part
Strategy 1: Blunt-End Cloning
Preparation of the Insert:
First, we linearized the construct using HindIII, followed by treatment with the Klenow fragment to convert the sticky ends into blunt ends. We then digested the linearized product with XbaI and isolated the insert through gel extraction.
Preparation of the Vector:
We linearized the vector with XhoI, converted the sticky ends to blunt ends using the Klenow fragment, performed another digestion with XbaI, and isolated the backbone via gel extraction.
Strategy 2: Partial Digestion Cloning
Preparation of the Insert:
Initially, we linearized the pCMV-MycNFAT construct with XbaI, then performed partial digestion with BglII at four different time points: 10, 20, 30, and 45 minutes. We identified the correct band through gel electrophoresis and isolated it via gel extraction.
Preparation of the Vector:
Complete digestion of the vector was carried out using BamHI, followed by isolation of the vector and subsequent digestion with XbaI. The backbone fragment was then removed through gel extraction.
Ligation Step
For the ligation we mixed the insert and vector in a 3:1 molar ratio and used T4 ligase. Notably, for the partial digestion strategy, we employed a buffer specialized for blunt-end ligation. The constructs were then amplified in DH5α cell lines.
Testing of another tagged version of the synthetic NFAT
Unfortunately, in the first scenario using the Klenow fragment, only a single colony was produced. Upon screening via restriction digest analysis, this colony did not yield the desired cutting pattern when viewed on a gel. In contrast, in the second scenario, multiple colonies were obtained, and suitable colonies were identified through restriction digest analysis. A midi prep was subsequently conducted to extract sufficient plasmid quantities, with measurements performed using software that analyzed light intensity from the gel, alongside NanoDrop readings.
Learning from a successful cloning
One important lesson learned during this project is that not all antibody tags are suitable for performing immunocytochemistry, as their effectiveness can vary depending on the specific protein being studied. Additionally, we gained valuable experience in subcloning techniques and realized that multiple strategies can achieve the same goal, which is beneficial since one method may not always be successful. This adaptability is crucial in molecular cloning, as it increases the likelihood of obtaining the desired constructs.
Functional Experiments
IMPORTANT NOTICE
The NFAT construct was kindly provided by Benčina M, with the goal of studying its translocation to the nucleus after ionophore stimulation. For detection, we used an immunohistochemical approach targeting the Myc-tag epitope, which was fused to the N-terminus of the NFAT construct. However, the antibody against the Myc-tag epitope generated significant background noise. While it had some affinity for its target, it also bound nonspecifically to other molecules, leading to an inconclusive image under the microscope. Despite this issue, we confirmed the expression of the synthetic protein via Western blot, which motivated us to explore alternatives. Specifically, we decided to add a Flag tag in front of the Myc-tag epitope, leading us to try two different cloning strategies to achieve this.
First, we attempted to fuse the Flag tag using subcloning. In this approach, we extracted the insert and blunt-ended one side of both the vector and the insert while keeping the other side sticky to maintain directionality during the ligation step. Unfortunately, this strategy was unsuccessful. The second strategy, which worked, involved performing a partial digestion, as one of the restriction enzyme sites was located within the NFAT insert itself. We then performed directional cloning into a new vector containing the Flag tag .
| None |