Part:BBa_K4365000
FIG1 inducible promoter
The Factor-Induced Gene 1 (FIG1) is a pheromone-induced promoter in yeast that is activated by the alpha mating factor. The FIG1 promoter is a great device for synthetic biology applications aiming to engineer productive stationary-phase systems in S. cerevisiae. This is because the induction of the FIG1 promoter by the alpha mating factor, in addition to activating expression, leads to the arrest of growth and maintenance of active metabolism in S. cerevisiae. As a result, the synthesis of a product of interest is decoupled from population growth, and cellular resources, such as carbon and nitrogen, can be redirected from biomass production to the synthesis of the desired bioproduct. Moreover, the FIG1 promoter is strictly regulated by a well-understood signaling cascade, which avoids cross-activation of other pathways and has enabled the construction and fine-tuning of a multitude of synthetic regulatory circuits.
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12COMPATIBLE WITH RFC[12]
- 21COMPATIBLE WITH RFC[21]
- 23COMPATIBLE WITH RFC[23]
- 25INCOMPATIBLE WITH RFC[25]Illegal NgoMIV site found at 172
- 1000COMPATIBLE WITH RFC[1000]
Biology and Usage
Factor-Induced Gene 1 and pheromone induced mating pathway
Factor-Induced Gene 1 (FIG1) is a pheromone-responsive gene whose expression is activated by a transcription factor Ste12 [1]. Ste12 is one of transcriptional factors regulated by pheromone induced mating pathway. The pathway is activated when the mating pheromone (alpha mating factor in Saccharomyces cerevisiae) binds to its receptor (Ste2) which leads to signal transduction via MAP kinase cascade. This results in phosphorylation of Ste12 transcription factor and allows it to bind to PRE motif present in pheromone-responsive genes promoter [2].
FIG1 promoter and its advantages for synthethic biology in yeast
FIG1 promoter is a pheromone-induced promoter that is activated by the alpha mating factor. This promoter can be applied for engineering productive stationary-phase systems in S. cerevisiae and has been used to improve heterologous protein yield [3] or to control cell-cell communication in yeast cultures [4]. FIG1 promoter is strictly regulated by a well-understood signaling cascade, which avoids the cross-activation of other pathways [3].
The induction of the FIG1 promoter by the alpha mating factor not only activates the expression of a gene of interest, but also stops the growth and maintenance of active metabolism in S. cerevisiae. As a result, the synthesis of a product of interest becomes independent of population growth. At the same time, cellular resources, such as carbon and nitrogen, can be redirected from biomass production to the synthesis of the desired bioproduct [3].
References
- ↑ Pincus D, Ryan CJ, Smith RD, Brent R, Resnekov O. Assigning quantitative function to post-translational modifications reveals multiple sites of phosphorylation that tune yeast pheromone signaling output [published correction appears in PLoS One. 2013;8(6). doi: 10.1371/annotation/06dfa4e4-30f5-4d37-8559-0f2a9d11f0de]. PLoS One. 2013;8(3):e56544. doi:10.1371/journal.pone.0056544
- ↑ Wong Sak Hoi J, Dumas B. Ste12 and Ste12-like proteins, fungal transcription factors regulating development and pathogenicity. Eukaryot Cell. 2010 Apr;9(4):480-5. doi: 10.1128/EC.00333-09. Epub 2010 Feb 5. PMID: 20139240; PMCID: PMC2863410.
- ↑ 3.0 3.1 3.2 Thomas C. Williams, Bingyin Peng, Claudia E. Vickers, Lars K. Nielsen, The Saccharomyces cerevisiae pheromone-response is a metabolically active stationary phase for bio-production, Metabolic Engineering Communications, Volume 3, 2016, Pages 142-152, ISSN 2214-0301, https://doi.org/10.1016/j.meteno.2016.05.001.
- ↑ Hennig, S., Rödel, G. & Ostermann, K. Artificial cell-cell communication as an emerging tool in synthetic biology applications. J Biol Eng 9, 13 (2015). https://doi.org/10.1186/s13036-015-0011-2.
Characterization of FIG1 promoter
Pheromone response induction and activation of the FIG1 promoter in Δfar1 Δbar1 strain
To characterize the *FIG1* promoter and the pheromone response it induces we conducted a series of tests. We first verified the effect of the alpha mating factor pheromone on growth by culturing yeast cells in two conditions in flasks. BY4741 yeast strain with Δfar1 and Δbar1 deletions (Euroscarf, Acc. No. Y00000). These deletions prevent the degradation of the pheromone [12] and the cell cycle arrest [13]. The far1 deletion is beneficial to sensing systems as it avoids complete arrest of the cell cycle so that the strain does not get lost.
The two yeast cultures were grown overnight in MV medium at 30°C in a shaking incubator. The following day, a 20 mL culture was prepared by adjusting the overnight cultures to 1 OD and 500 nM alpha mating factor pheromone were added into the medium to activate the pheromone response.
The growth of the cultures was monitored over the course of several hours, starting with 12 hours after induction, by measuring their optical density using a spectrophotometer (Figure 5). Due to the size of the yeast cells, it was always necessary to perform a 1:10 dilution of the yeast culture before measuring the OD. The data was plotted using R-studio.
The growth curves show that the pheromone is still able to slow down growth despite the deletion of the FAR1 gene.
Characterization of the FIG1 promoter-driven expression
To assess the degree of leakiness in the regulation of the *FIG1* promoter we performed two sets of experiments.
We transformed the BY4741 ∆far1 ∆bar1 yeast strain with the p426 shuttle plasmid [14] for the expression of turboRFP under the control of the *FIG1* promoter. An overnight culture of this yeast strain was prepared in W0 minimal medium and the next day it was split to make two main cultures, each at 1 OD. One of the two cultures was induced with 500 nM alpha mating factor while the other was left uninduced as a control. A sample of each culture was then spun down and imaged using both brightfield and TexasRed emission channels. This was repeated for a total of 5 time points, starting at 0 hours and running until 4 hours after induction.
Next to no turboRFP-positive cells were observed in the control group while the signal was consistently present in the induced group and accumulated over time as is shown by the increase from time points taken at 2 and 4 hours. To get a more detailed analysis a follow-up experiment was conducted using flow cytometry.
Single Cell Resolution using Cyflow
To further demonstrate the consistency and potency of induction of the *FIG1* via the alpha mating factor pheromone, we transformed yeast with the p426 shuttle plasmid [14] for the expression of EGFP under the control of the *FIG1* promoter. In this experiment, we also tested the influence of rich (MV) and minimal (W0) medium on the regulation of the *FIG1* promoter.
An overnight culture of this yeast strain was prepared in W0 minimal medium and the next day it was split to make two main cultures in rich MV medium and minimal W0. All four cultures were adjusted to an OD of 1. One of the cultures in MV and one of the cultures in W0 was induced with 500 nM alpha mating factor while the other was left noninduced as a control. The cultures were grown at 30°C in a shaking incubator.
Induced and non-induced cell populations were analyzed by cytometry to determine the EGFP intensity per cell after 1 hour and 3.5 hours after the inoculation of the alpha mating factor pheromone into the culture. For each analysis 20,000 total cells were measured. Analysis of the cyflow data was conducted using online tools at [floreada.io](https://floreada.io/). The experimental groups and plots of the obtained cyflow results are summarized below.
| + Alpha Factor | - Alpha Factor | |
|---|---|---|
| MV Medium | MV induced | MV uninduced |
| W0 Medium | W0 induced | W0 uninduced |
From these results, it is possible to observe that the induction of the FIG1 promoter is well regulated and exhibits minimal leakiness when in the W0 medium conditions. The mean intensity for the non-induced population was found to be 9.5 at 1 hour and 8.59 at 3.5 hours. Seeing as the mean does not increase over time this signal can likely be explained as background signal during measurement, not originating from any gene expression. For the induced sample in W0 medium the mean intensity was found to be 15.91 at 1 hour and 51.89 at 3.5 hours showing a dramatic increase over time. However, in the MV media condition the measured intensity was found to increase for both induced and non-induced conditions over time. The non-induced sample increased from a mean intensity of 8.8 at 1 hour to 10.46 at 3.5 hours, at the same timepoints the induced sample increased from 15.12 to 52.43. This slight shift in non-induced intensity can be appreciated in figure 8.C-D (blue). This increase can also be seen between media conditions, where the non-induced control in MV appears to slightly gain fluorescence (Figure 8, blue, D) compared to the same population grown in minimal medium (Figure 8, blue, B). It seems that the use of rich medium (MV) may have an effect on the induction of the FIG1 promotor causing aberrant gene expression in the non-induced samples. It is therefore possible that MV media increases the overall expression regardless of the presence of the alpha mating factor pheromone. We therefore recommend that yeast be cultivated in minimal media variants to avoid unregulated expression of the target protein when using the FIG1 promoter.
Functional Parameters
//promoter
//regulation/positive
| None |