Part:BBa_K3002213
L2 spectinomycin resistance + ARS_Mut-PETase_SP20HA + cCA_MHETase_SP20HA
This composite part (L2N) contains a spectinomycin resistance (BBa_K3002102), the mutant PETase with the secretion signal ARS (BBa_K3002111) and the MHETase with the cCA (BBa_K3002114), both fused with an SP20HA-tag for easy detection via HA-antibody and enhanced secretion.
Effect of the SP20 module on the secretion efficiency of MHETase and PETase. (a) Level 2 MoClo constructs harboring the aadA selection marker, and the coding sequences for MUT-PETase and MHETase equipped with the secretion signals (BBa_K3002212, BBa_K3002213, BBa_K3002214) introduced in Figure 6 and a C-terminal SP20 tag for enhancing glycosylation. See Figure 1 for the description of other parts. (b) UVM4 transformants containing the constructs shown in (a) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Transformants C12 (BBa_K3002202) and A27 (BBa_K3002200) introduced in Figures 4 and 5, respectively, served as positive controls. The black arrow points to MHETase, the white arrow to MUT-PETase.
The SP20 module increases the efficiency of protein secretion. (a) Level 2 MoClo constructs harboring the aadA selection marker, and the coding sequences for MUT-PETase and MHETase equipped with the secretion signals introduced in Figure 6. The constructs contain the coding sequence for a conventional 3xHA tag (C, K, L)(BBa_K3002202, BBa_K3002210, BBa_K3002211), or the 3xHA tag preceded by a SP20 tag to enhance glycosylation (M, N, O). See Figure 1 for the description of other parts. (b) UVM4 transformants containing the constructs C, K, L and M, N, O (BBa_K3002202, BBa_K3002210, BBa_K3002211, BBa_K3002212, BBa_K3002213, BBa_K3002214) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Transformant A27 introduced in Figures 4, served as positive control. The black arrow points to MHETase, the white arrow to MUT-PETase and the grey arrow to RPL1 (chloroplast ribosomal 50S protein L1). The RPL1 antibody was used to detect contamination from intracellular proteins.
Identification of MHETase and MUT-PETase by LC-MS/MS. (a) Transformants generated with construct L2N (BBa_K3002213) (d) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Protein bands corresponding to those detected with the anti-HA antibody in a gel run in parallel and stained with Coomassie brilliant blue were excised, in-gel digested with trypsin and analyzed by LC-MS/MS. Peptides identified by LC-MS/MS for MHETase (green) and MUT-PETase (purple) are indicated. (b, c) Sequences of MHETase and MUT-PETase with the peptides detected by LC-MS/MS are highlighted in green and purple, respectively.
Verification of secretion of MHETase and MUT-PETase into the medium. Transformants generated with constructs M, N, and O (BBa_K3002212, BBa_K3002213, BBa_K3002214)(Figure 8) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant (s) lyophilized and resuspended in 2xSDS buffer. Cell pellets (p) were also resuspended in SDS-buffer. Both fractions were analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. The black arrow points to MHETase, the white arrow to MUT-PETase.
Quantification of secreted MHETase and MUT-PETase. (a) Transformants generated with constructs C, J, M, N, and O (BBa_K3002202, BBa_K3002208, BBa_K3002212, BBa_K3002213, BBa_K3002214)(Figure 8) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Whole-cell extracts of strain B1-TIG-HA for which concentrations of the HA-tagged TIG protein are known are loaded next to the lyophilized supernatants. The black arrow points to MHETase, the white arrows to MUT-PETase. The supernatant of a culture with the UVM4 strain were loaded as negative control. (b) Maximum cell densities, doubling times, daily growth rates, yields of MHETase and PETase and daily productivity of both combined were calculated for the transformant lines indicated.
Analysis of secreted enzymes of transformant N6 transformed with construct AI. (b) Clones generated with transformant N6 (Figure 8) and construct L2AI (BBa_K3002234) (a) were grown in TAP medium for four days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Transformant C12 introduced in Figure 5, served as positive controls. The black arrow points to MHETase, the white arrow to MUT-PETase.
Analysis of secreted MUT-PETase and MHETase with secretion signals cCA, ARS and GLE in the CC-4533 strain background. Transformants generated in the CC-4533 strain background with constructs M (BBa_K3002212) and N (BBa_K3002213) (Figure 8) were grown in TAP medium for four days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. The supernatant of a culture with the CC-4533 strain were loaded as negative control. The black arrow points to MHETase, the white arrow to MUT-PETase.
Growth and secretion of MUT-PETase and MHETase in UVM4 transformant N6 under different conditions. (a) Growth curves of the UVM4 recipient strain and UVM4 transformant N6 (BBa_K3002213) (Figure 8) at 25°C, 80 ”E and 33°C, 170 ”E. UVM4 and transformant N6 were inoculated in 50 mL with 2*105 cells/mL. Growth was measured by counting cells for 8 days. Error bars represent the standard error of three biological replicates. (b) Time course of MHETase and MUT-PETase secretion into TAP medium. 2 mL of each sample was lyophilized, desalted and resuspended in 2xSDS loading buffer. 10 ”l of each sample were separated via SDS-PAGE and analyzed by immunoblotting with an anti-HA antibody. An antibody against chloroplast ribosomal 50S protein L1 (RPL1) was used to detect contaminations from cellular proteins. The black arrow points to MHETase, the white arrow to MUT-PETase and the grey arrow to RPL1. (c-f) Bright-field images of strains UVM4 and N6 grown grown for 3 days at 25°C and 89 ”E or at 33°C and 170 ”E.
The Chlamy Yummy Project Collection
We are proud to present our MoClo part collection for C. reinhardtii - the Chlamy Yummy project collection.
These 67 parts are all parts used during our project and were specifically designed and codon optimized for Chlamydomonas. Among them are basic parts (L0) of a novel mutant of the PETase (BBa_K3002014), the wildtype PETase and MHETase as well as a variety of functional composite parts (L1+2). Containing different tags as well as selection markers, this collection serves as a perfect base for plastic degradation projects with Chlamydomonas. These parts were tested and optimized thoroughly and we can guarantee that they work 100%. Because this is a MoClo collection, the parts are highly standardized for worldwide application. The combination with other part collections works fast and easy. While in MoClo, nomenclature is a bit different from the iGEM BioBricks, it is quickly explained:
Level 0 parts are equivalent to basic parts, e.g. Promoters, coding sequences, etc.
Level 1 parts are combinations of basic parts and usually form functional transcription units.
Level 2 parts are combinations of Level 1 parts, in case you want to transfer multiple transcription units at once. For example, you can pair your gene of interest with a selection marker.
The great thing about the Chlamy Yummy Collection and MoClo is that the ligation works in a one pot, one step reaction, as the Type IIs restriction enzymes cut out their own recognition sites. This way, multiple constructs can be combined linearly in a fixed order to create complex structures. This is ensured by the standardized overlaps that assign the parts one of 10 positions in the final constructs. After trying MoClo once, you wonât go back to traditional ligation. It is incredibly easy and reliable. Visit our parts site to get an overview over all parts.
Sequence and Features
- 10INCOMPATIBLE WITH RFC[10]Illegal EcoRI site found at 2401
Illegal EcoRI site found at 5423
Illegal PstI site found at 3491
Illegal PstI site found at 4464
Illegal PstI site found at 6765
Illegal PstI site found at 7089
Illegal PstI site found at 7432
Illegal PstI site found at 8242 - 12INCOMPATIBLE WITH RFC[12]Illegal EcoRI site found at 2401
Illegal EcoRI site found at 5423
Illegal NheI site found at 2665
Illegal NheI site found at 5687
Illegal PstI site found at 3491
Illegal PstI site found at 4464
Illegal PstI site found at 6765
Illegal PstI site found at 7089
Illegal PstI site found at 7432
Illegal PstI site found at 8242
Illegal NotI site found at 7100 - 21INCOMPATIBLE WITH RFC[21]Illegal EcoRI site found at 2401
Illegal EcoRI site found at 5423
Illegal BglII site found at 8010 - 23INCOMPATIBLE WITH RFC[23]Illegal EcoRI site found at 2401
Illegal EcoRI site found at 5423
Illegal PstI site found at 3491
Illegal PstI site found at 4464
Illegal PstI site found at 6765
Illegal PstI site found at 7089
Illegal PstI site found at 7432
Illegal PstI site found at 8242 - 25INCOMPATIBLE WITH RFC[25]Illegal EcoRI site found at 2401
Illegal EcoRI site found at 5423
Illegal PstI site found at 3491
Illegal PstI site found at 4464
Illegal PstI site found at 6765
Illegal PstI site found at 7089
Illegal PstI site found at 7432
Illegal PstI site found at 8242
Illegal NgoMIV site found at 1401
Illegal NgoMIV site found at 1584
Illegal NgoMIV site found at 1694
Illegal NgoMIV site found at 3226
Illegal NgoMIV site found at 3253
Illegal NgoMIV site found at 5024
Illegal NgoMIV site found at 6698 - 1000COMPATIBLE WITH RFC[1000]
| None |