Protein_Domain

Part:BBa_K3002007

Designed by: Dorothée Klein   Group: iGEM19_TU_Kaiserslautern   (2019-10-13)
Revision as of 20:27, 13 December 2019 by Kleind (Talk | contribs)


cCA secretion signal for Chlamydomonas reinhardtii (Phytobrick)

This basic part contains the secretion signal of the carbonic anhydrase (cCA) (B2) for Chlamydomonas reinhardtii and was built as a part of the Kaiser Collection. By using this part in your construct in combination with an appropriate promoter of the Kaiser Collection like BBa_K3002031 (PAR-promoter (A1-B1)) or BBa_K3002001 (PSAD-promoter (A1-B1)), your target protein will be translocated into the surrounding medium.

Constructs containing the secretion signal cCA allow a secretion of the proteins. The secretion signal cCA shows constant secretion of the proteins. This applies for the MUT-PETase alone but also for the MUT-PETase in combination with the MHETase. Construct containing cCA leads to high yield of the secreted proteins.

MUT-PETase destined for secretion gets stuck inside the cell. (a) Level 2 MoClo construct harboring the aadA selection marker, and the coding sequences for MUT-PETase and MHETase genes. MUT-PETase and MHETase are equipped with the secretion signal from carbonic anhydrase (cCA). See Figure 1 for the description of other parts. (b) Seven days old cultures of transformants generated with the construct shown in (a) were centrifuged and proteins in the culture medium were precipitated by TCA and analysed by immunoblotting using an anti-HA antibody. The black arrow represents MHETase. (c) Whole-cell proteins of UVM4 cells transformed with construct L2C (BBa_K3002202) shown in (a) were analyzed by immuno-blotting using an anti-HA antibody. Transformant A27 generated with construct L2A (BBa_K3002200) (Figure 4a) and UVM4 were used as positive and negative controls, respectively. The white arrow indicates MUT-PETase. (d) Immunfluorescence analysis of transformants 17 and 27 using an anti-HA antibody. DAPI staining was also performed. UVM4 cells served as control.

Analysis of the secretion of MUT-PETase with secretion signals cCA, GLE, and ARS. (a) Level 2 MoClo constructs harboring the aadA selection marker, and the coding sequences for MUT-PETase equipped with secretion signals from carbonic anhydrase (cCA), gamete lytic enzyme (GLE) and arylsulfatase (ARS). See Figure 1 for the description of other parts. (b) UVM4 transformants containing the constructs shown in (a) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody.Transformants C12 and A27 introduced in Figures 4 and 5, respectively, served as positive controls. The white arrow points to the MUT-PETase.

Effect of the SP20 module on the secretion efficiency of MHETase. (a) Level 2 MoClo constructs harboring the aadA selection marker, and the coding sequences for MUT-PETase and MHETase equipped with the secretion signals introduced in Figure 6 and a C-terminal SP20 tag for enhancing glycosylation. See Figure 1 for the description of other parts. (b) UVM4 transformants containing the constructs shown in (a) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Transformants C12 and A27 introduced in Figures 4 and 5, respectively, served as positive controls. The black arrow points to MHETase, the white arrow to MUT-PETase.

,

The SP20 module increases the efficiency of protein secretion. (a) Level 2 MoClo constructs harboring the aadA selection marker, and the coding sequences for MUT-PETase and MHETase equipped with the secretion signals introduced in Figure 6. The constructs contain the coding sequence for a conventional 3xHA tag (C, K, L), or the 3xHA tag preceded by a SP20 tag to enhance glycosylation (M, N, O). See Figure 1 for the description of other parts. (b) UVM4 transformants containing the constructs C, K, L and M, N, O were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Transformant A27 introduced in Figures 4, served as positive control. The black arrow points to MHETase, the white arrow to MUT-PETase and the grey arrow to RPL1 (chloroplast ribosomal 50S protein L1). The RPL1 antibody was used to detect contamination from intracellular proteins.

Identification of MHETase and MUT-PETase by LC-MS/MS. (a) Transformants generated with construct L2N (BBa_K3002213) (d) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Protein bands corresponding to those detected with the anti-HA antibody in a gel run in parallel and stained with Coomassie brilliant blue were excised, in-gel digested with trypsin and analyzed by LC-MS/MS. Peptides identified by LC-MS/MS for MHETase (green) and MUT-PETase (purple) are indicated. (b, c) Sequences of MHETase and MUT-PETase with the peptides detected by LC-MS/MS are highlighted in green and purple, respectively.

Verification of secretion of MHETase and MUT-PETase into the medium. Transformants generated with constructs M, N, and O (Figure 8) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant (s) lyophilized and resuspended in 2xSDS buffer. Cell pellets (p) were also resuspended in SDS-buffer. Both fractions were analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. The black arrow points to MHETase, the white arrow to MUT-PETase.

Quantification of secreted MHETase and MUT-PETase. (a) Transformants generated with constructs C, J, M, N, and O (Figure 8) were grown in TAP medium for seven days. Cells were centrifuged and the supernatant lyophilized, resuspended in 2xSDS buffer and analyzed by SDS-PAGE and immunoblotting with an anti-HA antibody. Whole-cell extracts of strain B1-TIG-HA for which concentrations of the HA-tagged TIG protein are known are loaded next to the lyophilized supernatants. The black arrow points to MHETase, the white arrows to MUT-PETase. The supernatant of a culture with the UVM4 strain were loaded as negative control. (b) Maximum cell densities, doubling times, daily growth rates, yields of MHETase and PETase and daily productivity of both combined were calculated for the transformant lines indicated.

The Kaiser Collection

We are proud to present our very own MoClo part collection for C. reinhardtii - the Kaiser collection.

These 20 Parts are specifically designed and codon optimized for Chlamydomonas. Among them are regulatory elements, antibiotic resistances, resistance cassettes, secretion signals and tags. These parts were tested and optimized thoroughly and we can guarantee that they work 100%. With these, expression and secretion in Chlamy will be a success. Because this is a MoClo collection, the parts are highly standardized for worldwide application. The combination with other part collections works fast and easy. While in MoClo, nomenclature is a bit different from the iGEM BioBricks, it is quickly explained:

Level 0 parts are equivalent to basic parts, e.g. Promoters, coding sequences, etc.

Level 1 parts are combinations of basic parts and usually form functional transcription units.

Level 2 parts are combinations of Level 1 parts, in case you want to transfer multiple transcription units at once. For example, you can pair your gene of interest with a selection marker.

The great thing about the Kaiser Collection and MoClo is that the ligation works in a one pot, one step reaction, as the Type IIs restriction enzymes cut out their own recognition sites. This way, multiple constructs can be combined linearly in a fixed order to create complex structures. This is ensured by the standardized overlaps that assign the parts one of 10 positions in the final constructs. After trying MoClo once, you won’t go back to traditional ligation. It is incredibly easy and reliable. For this reason, we believe that our Kaiser Collection will strike a significant chord, as the future lies in standardized, easy to use methods such as MoClo. Visit our part collection site to get an overview over all parts of the Kaiser Collection

UNIQ69500f4490837a0c-html-00000002-QINU

Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]


[edit]
Categories
Parameters
None