Part:BBa_K2382015

Thioredoxin-FGD fusion protein

Sequence and Features

Assembly Compatibility:

• 10
  COMPATIBLE WITH RFC[10]
• 12
  INCOMPATIBLE WITH RFC[12]

  Illegal NotI site found at 1068
  
• 21
  INCOMPATIBLE WITH RFC[21]

  Illegal BglII site found at 1117
  Illegal BamHI site found at 405
  Illegal XhoI site found at 411
  Illegal XhoI site found at 1383
  
• 23
  COMPATIBLE WITH RFC[23]
• 25
  INCOMPATIBLE WITH RFC[25]

  Illegal NgoMIV site found at 777
  Illegal NgoMIV site found at 975
  Illegal AgeI site found at 741
  
• 1000
  COMPATIBLE WITH RFC[1000]

Usage and Biology

A fusion protein composed of thioredoxin BBa_K2382004 and FGDBBa_K2382002(F420-dependent glucose-6-phosphate dehydrogenase). Between the two small proteins are flexible linkers.

Characterization of the MSMEG_5998

Expression results

IPTG induction

First, we transformed plasmid (encodes MSMEG_5998) from Australia into E. coli BL21 (DE3) strain to express protein. Then IPTG was used to induce the expression system since all plasmids in our project had T7 promoter. We sonicated E. coli and did 9500 rpm and 13000 rpm centrifugation to remove the cell pellet and obtain the supernatant. To confirm the suitable concentration of cell supernatant, we did SDS-PAGE electrophoresis and coomassie brilliant blue staining. The result is demonstrated in the Fig. 1A. After centrifuging two times, we could find a high percentage of proteins in the cell supernatant (the 13000 Su group).

Fig. 1A: Cell lysates were analyzed by SDS-PAGE and coomassie brilliant blue staining. 9500 T meant the initial sample obtained after sonication; 9500 P and 13000 T meant the pellet and the supernatant gotten after 9500 rpm for 20 min; 13000 P and 13000 Su meant the pellet and the supernatant obtained after 13000 rpm for 20 min.

Protein purification, and dialysis

After extracting the cell lysates, we used nickel-resin column to purify our target proteins from the cell lysates because all of our proteins were tagged with 6 histidines at their C-terminal ends. After protein purification, protein dialysis with diaysis buffer containing 150 mM NaCl, 20 mM Tris-HCl (pH=7.5), and 20% glycerol to remove imidazole in our purified proteins, we did SDS-PAGE gel electrophoresis to ensure our target proteins were successfully purified (Fig. 2A ). The molecular weights of these proteins are listed in the Table 1. The standard BSA proteins were used to quantify the concentration of target proteins.

Table 1: Two expressed recombinant proteins and their molecular weights are listed.

Proteins	Molecular weight
Australian MSMEG5998	18.9 kDa
Australian FGD	37.7 kDa

Fig. 2A: Concentration of proteins was quantified by SDS-PAGE and standard BSA samples with 0.16, 0.31, 0.63, 1.25, 2.5, 5, 10 mg/ml. Two recombinant proteins were expressed by the plasmids from Australia.

Protein solubility analysis

To know whether the solubility of our two enzymes (MSMEG_5998 and FGD BBa_K2382002) increased after fusing enzymes with thioredoxin, we dissolved all cell lysates which containing pellet and supernatant and did western blot to detect the content of our target proteins. All proteins were detected by anti-6x His Tag antibody because all of them contained a 6-histidines tail when bacteria expressed them. In Fig. 3, we could find there was good expression of both Australian and synthetic MSMEG5998 in the “13000 Su” group when compared with the “13000 P” group. This result meant that most proteins were dissolved in the supernatant while few proteins deposited in the cell pellet after 13000-rpm centrifugation. However, we could not observe good solubility in both Australian and synthetic FGD because there were little or no difference between the “13000 Su” group and the “13000 P” group.

Figure 3: Cell lysates in the process of two times centrifuge were analyzed by western blot. The abbreviations of five groups were the same as Fig. 1.

Protein Expression Over Time

We transformed the plasmids that contained MSMEG_5998(BBa_K2382001) and Thioredoxin-MSMEG_5998 fusion protein(BBa_K2382009) respectively into competent cell E.coli BL21. After cultured overnight, measure the ABS600 and diluting the LB medium to O.D.=0.1. Then incubate at 37℃, 150 rpm until the O.D. of the samples reach 0.4 to 0.6 . Add 80ul 100mM IPTG( final concentration : 0.4mM ) to 125 ml flask and return to 37°C. From then on, after measure the O.D. values, transfer 1 ml from the induced sample and centrifuge at maximum speed for 60 seconds at RT and remove supernatant at 0, 1, 2, 3, 4, 5, 6, 7, 8 hours and 0, 0.5, 1.0, 1.5, 2.0 ,2.5 , 3.0, 3.5, 4 hours. Then we use Western Blot mehtod to amalyze the quantaty of MSMEG_5998 at each time spot. </p>

Discussion

Figure 1 : The growth curve of BL21 induced by IPTG from 0 to 4 hours. The concentration of BL21 reached stationary phase at 4 hours.

According to the data shown above, the growth curve of E.coli BL21 with Synthetic MSMEG_5998 reached the ceiling when the O.D. value was approximately at 2 while the amount of Synthetic MSMEG_5998 were still increasing.

Though the amount of Synthetic MSMEG_5998 increased consistently with time, we could not jump to conclusions that it was proper to incubate E.coli as long as possible. Another consideration was the time it would take. Just as our expected, it growed fast at the first 2.5 hours. That’s why we also chose 2.5hr after induced by IPTG when we extracted Synthetic MSMEG_5998 from total cell lysate in other experiments.

Figure 2 : The growth curve of BL21 from 0 to 8 hr. The concentration of BL21 reached stationary phase at 4 hours and then declined slightly.

Based on previous experience, if the E.coli was incubated over 4 hours, the protein that it expressed may be degraded or mis-folded, leading to malfunction. As a result, it was also an important issue for this modeling. However, because of the lack of F420, we did not have the chance to check the enzyme activity of each time spot. It was still unknown whether the titer of the Synthetic MSMEG_5998 would change or not and awaited further research.

Figure 3 : Cell lysates from E. coli BL21 with Synthetic MSMEG5998 from 0 to 8 hours and 0 to 4 hours were analyzed by Western blot. The amount of Synthetic MSMEG5998 increased consistently with time.

Enzyme Function Results

Enzyme Activity Assay

The conditions of reaction to degrade aflatoxin by MSMEG5998 were modified from Taylor’s study[6]. All concentrations of reactants are listed in Table 2 and 32 μM aflatoxin was used. We first mixed all reactants in eppendorfs and then put them at 22°C.

Figure 7A: MSMEG5998 could significantly degrade aflatoxin at time manner in vitro. (A) Direct 365 nm absorbance were detected after mixing Australian/synthetic MSMEG5998 and Australian/synthetic FGD and other reactants at 0th and 8th hour in the environment of pH=7.5 and 22℃.

In Fig. 7A, we compared two proteins, MSMEG5998 and F420-dependent glucose-6-phosphate dehydrogenase (FGD) expressed from Taylor’s vectors (from Australia) and from our synthetic vectors. We found that both the Australian and synthetic MSMEG5998 have great activity and degraded aflatoxin B1 by more than 60%. The effect of the synthetic one may be better than the Australian one but there were no statistic significance.

Table 2: The substance concentration of the aflatoxin-degradation reaction. For convenience sake, we called G6P, F420, FGD, and tris buffer as the reactants.

Name	Concentration
Aflatoxin B1	32 or 10 μM
MSMEG5998	0.1 μM

Reactants

Glucose-6-phosphate (G6P)	2.5 mM
F420	5 μM
F420-dependent glucose-6-phosphate dehydrogenase (FGD)	0.225 μM
Tris-HCl (pH=7.5)	25 mM

However, only Australian FGD has activity to reduce F420 into F420H2 and help the reaction. This finding corresponds with our dry lab results. Therefore, we used Australian and synthetic MSMEG5998 and Australian FGD to do the same experiment again to figure out whether the degradation percentage was dependent of time and whether the main reason of degradation was MSMEG5998. </p>

Figure 7B: MSMEG5998 could significantly degrade aflatoxin at time manner in vitro. (B) The same way as (A) but Australian/synthetic MSMEG5998 and Australian FGD were used and the reaction were detected at 0th, 2nd, 4th, 6th, and 8th hour. a, p < 0.001 compared to the 0th hour of the synthetic MSMEG5998(+) group; b, p < 0.001 compared to the 0th hour of the Australian MSMEG5998(+) group; c, p < 0.001 compared to the same time of the Australian MSMEG5998(+) group.

Figure 7C: MSMEG5998 could significantly degrade aflatoxin at time manner in vitro. (A) Direct 365 nm absorbance were detected after mixing Australian/synthetic MSMEG5998 and Australian/synthetic FGD and other reactants at 0th and 8th hour in the environment of pH=7.5 and 22℃. (C) The same way as (B) but the degradation percentage were detected by ELISA. Because the initial concentration of aflatoxin (10000 ng/ml) was too high to be detected by the ELISA, we didn’t demonstrate the initial data.

The results were detected by direct 365 nm absorbance (Fig. 7B) and by ELISA (Fig. 7C). We found out that the degradation percentage was time-dependent. The synthetic MSMEG5998 had better activity than Australian MSMEG5998. The former was able to degrade 83% aflatoxin after 8 h while the latter could only degrade 52% aflatoxin.

MSMEG5998 alleviated aflatoxin-induced p53 pathway activation in HepG2

Cells (5×105/ 3.5 cm dish) were divided into 5 groups: control group, aflatoxin group (treated with 10 μM), aflatoxin + reactants group (treated with aflatoxin 10 μM and reactants as Table 2), aflatoxin + reactants + MSMEG5998 group (treated with aflatoxin 10 μM, reactants in Table 2 and synthetic MSMEG5998 0.1 μM), and MSMEG5998 group (treated with synthetic MSMEG5998 0.1 μM).

Figure 8: MSMEG5998 decreased the p53 pathway activation induced by aflatoxin in HepG2. p-Chk1, p-Chk2, p-p53 (Ser20), p53, and p21 were detected by western blot after HepG2 cells (5×105 cells/3.5 cm dish) were treated with aflatoxin for 24 h. β-actin was a loading control. All data were standardized with the control group. C: control group; AF: aflatoxin group; A+R: aflatoxin + reactants group: aflatoxin + reactants + MSMEG5998 g

After 24 h treatment, cells were lysed and their protein expression was analyzed by western blot. In Fig. 8, we found that the expression of p-Chk1 (Ser345), p-Chk2 (Thr68), p-p53 (Ser20), p53, and p21 were all decreased by MSMEG5998 and other reactants when compared to the aflatoxin alone group. This result may attribute to the highly desirable activity of MSMEG5998 of degrading aflatoxin and preventing the toxin from entering cells.

Unexpectedly, we also observed a lower expression of these proteins in the aflatoxin + reactants group, which meant that MSMEG5998 may not be the only factor that inhibit the activation of p53 pathway in HepG2 cells. Besides, to ensure that our enzyme MSMEG5998 would not be toxic to cells, we designed a group of MSMEG5998 alone and found that it resembles expression of these proteins as the control group. The results showed that this enzyme was safe.

Cloning Results

To insert MSMEG5998 gene into our shuttle vector for E. coli and yeast, pG1-EX1, we first designed two specific primers which contain BamHⅠ (the 5’ end one) and XhoⅠ (the 3’ end one) independently. Second, we did PCR to amplify our gene (the insert) and digested this gene with BamHⅠ and XhoⅠ. At the same time, we digested our plasmid with the same two restriction enzymes to prepare the vector. All results were checked by DNA electrophoresis before ligation. Then we used DNA ligase to ligate the insert and the vector and transformed this recombinant plasmid into E. coli (DH5α). The transformation result was shown in Fig. 9A. To check whether the construction was successful, we picked twenty colonies (cultured in another dish and showed in Fig. 9B) and extracted their plasmids. Then we did colony PCR to see whether the plasmids in these twenty colonies contained the MSMEG5998 gene. If the E. coli carried the recombinant plasmid, we could observe a clear band in about 700 bp. The DNA electrophoresis results were demonstrated in Fig. 9C. We found that most of the colonies carried the recombinant plasmid. Finally, after amplifying our recombinant plasmids in E. coli, we extracted the plasmids and transformed into yeasts to make them express the recombinant protein. There is one gene related to synthesize tryptophan in pG1-EX1, if our recombinant plasmid was successfully transformed into yeast and it could enable yeast to grow on the medium lacking tryptophan. The transform results were demonstrated in Fig. 9D.

Figure 9A: Construction of MSMEG5998 in pG1-EX1. (A) The E. coli (the ligated DNA with MSMEG5998 was transformed in E. coli DH5α) was grown on the LB medium + ampicillin.

Figure 9B: Construction of MSMEG5998 in pG1-EX1.(B) Twenty colonies from (A) were grown on the LB medium + ampicillin.

Figure 9C: Construction of MSMEG5998 in pG1-EX1.(C) The MSMEG5998 gene (around 700 bp) were observed by DNA electrophoresis after PCR.

Figure 9D: Construction of MSMEG5998 in pG1-EX1.(D) The yeast (MSMEG5998 plasmid was transformed in yeast BJ2168) was grown on the YPAD medium lacking tryptophan. “1” to “20”: the number of the colony from (B); “N”: the negative control (around 200 bp).

References

(1)Taylor, M.C., et al., Identification and characterization of two families of F420H2‐dependent reductases from Mycobacteria that catalyse aflatoxin degradation. Molecular microbiology, 2010. 78(3): p. 561-575.

(2)Lapalikar, G.V., et al., F420H2-dependent degradation of aflatoxin and other furanocoumarins is widespread throughout the Actinomycetales. PLoS One, 2012. 7(2): p. e30114.

(3)Mersch-Sundermann, V., et al., Use of a human-derived liver cell line for the detection of cytoprotective, antigenotoxic and cogenotoxic agents. Toxicology, 2004. 198(1): p. 329-340.

(4)Mah, L., A. El-Osta, and T. Karagiannis, γH2AX: a sensitive molecular marker of DNA damage and repair. Leukemia, 2010. 24(4): p. 679-686.

(5)Hirao, A., et al., DNA Damage-Induced Activation of p53 by the Checkpoint Kinase Chk2. Science, 2000. 287(5459): p. 1824.

(6)Shieh, S.-Y., et al., The human homologs of checkpoint kinases Chk1 and Cds1 (Chk2) phosphorylate p53 at multiple DNA damage-inducible sites. Genes & development, 2000. 14(3): p. 289-300.

(7)ohn, K.W., Molecular interaction map of the mammalian cell cycle control and DNA repair systems. Mol Biol Cell, 1999. 10(8): p. 2703-34.

(8)Taylor, M.C., et al., Identification and characterization of two families of F420H2‐dependent reductases from Mycobacteria that catalyse aflatoxin degradation. Molecular microbiology, 2010. 78(3): p. 561-575.