Not Released
Experience: Works
Not Used
Get This Part
Coding

Part:BBa_K1497031

Designed by: Sascha Hein, Rene Sahm, Malte Blumenroth, Tobias Gabriel, Sebastian Palluk   Group: iGEM14_TU_Darmstadt   (2014-10-07)
Revision as of 01:00, 15 October 2014 by TobiasGabriel (Talk | contribs)

Scaffold (G-S-P-His)



Usage and Biology

The protein scaffold is an assembly platform for ligand coupled target enzymes (figure 1). It was designed by the Keasling Lab in 2009 in order to improve the yield and production rate of metabolic processes. The association of target enzymes with the scaffold mimic naturally occurring catalysation cascades. In these, reaction efficiencies are optimized through the passing on of intermediates between co-located enzymes. The quick processing of intermediates can help to overcome negative production effects like unstable or toxic intermediates, metabolic bottlenecks or accumulation of undesired intermediates (Dueber et al. 2009).

The protein scaffold consists of three different protein binding domains namely the GBD (BBa_K1497024), SH3 (BBa_K1497025) and PDZ (BBa_K1497026) domains (figure 2). The domains can be linked together in any number and in any order. Therefore, a broad variety of scaffold proteins can be constructed from the initial domains depending on the application. The scaffold protein shown here consists of all domains in the order GBD1SH31PDZ1 or GSP for short. The coding sequence was optimized for the expression in E. coli and revised for the usage as a BioBrick. Additionally, a C-terminal His-tag was added allowing easy purification of the protein.

Functional Parameters

The Scaffold-His protein was cloned into the plasmid vector pet21a+ for expression and purification. The test expression showed a successful production of the scaffold protein (figure 3(a)). The amount of the scaffold protein increased quickly, reaching a plateau 1-2 h after induction. The SDS PAGE (figure 3(b)) for the analysis of the purification of the scaffold showed, that the supernatant of the centrifugation contained the majority of the produced protein, although a distinct band was visible also for the pellet. The protein binds efficiently to the Ni-NTA-column. Therefore, the scaffold band is not visible in the flow-through. The protein was eluted at an imidazole concentration of 100 - 200 mM. A Nanodrop measurement resulted in a yield of 3 mg of protein in both fractions. This leads to a total yield of 6 mg/L for the described method, whereas a quantitative estimation of the remaining amount in the pellet was not possible.

The influences of urea, KCl and pH changes on the stability of the scaffold were observed (figure 4). Urea does not cause denaturation at concentrations below 500 mM at low temperatures. The protein remains stable in 50 mM Tris at pH 8 at < 26°C (figure 4(a)). The additionally tested concentrations of 5 and 8 M are not presented since the protein was already denatured at 15°C. During the experiment with KCl, it became clear that the protein gained stability with increasing concentration (figure 5(b)). While denaturation started at 25°C with low KCl concentration, the stability rapidly increased, approaching a denaturation temperature of 40°C asymptotically when the KCl concentration was > 500 mM. A pH optimum was found at about 7 - 7.5 (figure 4(c)). Below pH 7, the thermal stability decreased rapidly. The protein was not correctly folded at pH 5.5 – 6 even below 15°C, while pH values above 7.5 showed similar, yet less drastic results.

The results match an expected behavior. The denaturing urea lowers the scaffold’s stability at higher concentrations while high salt concentrations support its structure. The stability curve at different pH values is similar to the expectation. The pI of the molecule lies between 5.8 and 6.2, at these pH values the protein is exprected to show the minimal solubility. Accordingly there is less solved protein to interact with the dye and a lower or non-existent intensity through denaturation. At pH > 7.5 the stability of the protein drops, since the amount of negatively charged amino acid rests increases and the amount of positively charges decreases respectively. This leads to stronger repulsion inside the molecule and lowers the energy that is necessary for denaturation. The experiments showed that the scaffold protein is heat labile, which explains the suggested expression temperature of 30°C from Dueber and could be a clue, that lower temperatures might prevent the formation of inclusion bodies and thereby increase the yield.

Figure 1: 3D-structure of the protein scaffold, created with PHYRE2 based on structure-homology-modeling


Figure 2: Model of a scaffold´s function. The domains are connected with a linker. They are able to build up a tight bound with enzymes assigned with a proper ligand. The educt is channeled through the enzymes and converted to the product.


Figure 3: SDS PAGE for the analysis of the production of the scaffold in LB medium. a) Expression of 2 colonies. The samples before induction (Vi) and the progression over 4 h is depicted. A band of increasing intensity at expected height exists for both colonies. b) Analysis of the IMAC purification: the pellet (Pel), the supernatant after centrifugation (Üs), the flow-through (Df) and 5 eluted fractions were analysed.


Figure 4: Results of the stability tests of the scaffold. a) Graph of denaturation temperature at different urea concentrations in solutions of 50 mM Tris at pH 8. At 26°C the protein remains stable up to a concentration of 0.5 M urea. Above, the stability drops heavily. b) Graph of denaturation temperature at different KCl concentrations at pH 7. Stability grows with increasing KCl concentration, with the curve approaching 39 - 40°C asymptotically. Low concentrations cause a denaturation temperature of approx. 25°C. c) Graph of denaturation temperature at different pH values. Stability shows a maximum around pH 7. It decreases rapidly at lower values and less rapidly at higher ones.


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal XhoI site found at 865
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal AgeI site found at 76
    Illegal AgeI site found at 199
  • 1000
    COMPATIBLE WITH RFC[1000]


References


Dueber, John E.; Wu, Gabriel C.; Malmirchegini, G. Reza; Moon, Tae Seok; Petzold, Christopher J.; Ullal, Adeeti V. et al. (2009): Synthetic protein scaffolds provide modular control over metabolic flux. In Nat. Biotechnol. 27 (8), pp. 753–759. DOI: 10.1038/nbt.1557.

[edit]
Categories
Parameters
n/aScaffold (G-S-P-His)