Part:BBa_K747000
TAL-Protein_AA1_DiRepeat
TAL- Proteins
TAL-Protein_AG1_Direpeat
TAL- Proteins
This part can be used to synthesize a 14 nucleotide Transactivator-like (TAL) protein i.e. DNA-binding proteins. In contrast to zinc-finger proteins they consist of domain-like repeats in their primary structure that differ only by two amino acids. The two aminoacids determine the nucleotide they bind.
Her we over a plasmid set of 96 Direpeats (Bba_K747000 to Bba_K747095) which allows you to assemble your own specific nucleotide target sequence. Every Direpeat is able to bind two specific nucleotides and is determined by his position in the 14 repeating Domains.
Designing a TAL-Protein:
To build a functional Tal- Protein, you have to choose a 14 nucleotide target sequence. Be aware that the first and the fourteenth nucleotide of the sequence has to be a Thymin. The second to the thirteenth nucleotide can be determined by choosing six Direpeats of the plasmid set:
- Bba_K747000 to Bba_K747015 predefines the nucleotide of the 2. and the 3. nucleotide.
- Bba_K747016 to Bba_K747031 predefines the nucleotide of the 4. and the 5. nucleotide.
- Bba_K747032 to Bba_K747047 predefines the nucleotide of the 6. and the 7. nucleotide.
- Bba_K747048 to Bba_K747063 predefines the nucleotide of the 8. and the 9. nucleotide.
- Bba_K747064 to Bba_K747079 predefines the nucleotide of the 10. and the 11. nucleotide.
- Bba_K747080 to Bba_K747095 predefines the nucleotide of the 12. and the 13. nucleotide.
As mammalian vector backbone we over you five plasmids: MammoBrick, Eukaryotic TAL expression plasmid, pTALEN, pTAL-TF, pTAL-AID. You can clone your Direpeats directly between the first and the fourteenth repeat.
The position of the Direpeat inside a TAL-Protein is determined by the sticky-end, which will be produced, if you digest the Direpeats with the type II restriction enzyme BSmBI. The Cloning can be performed in one single restriction-digestion.
BBa K747002; AA1
This Part allows you to predefine the binding affinity of the 2. nucleotide (adenine) and the 3. nucleotide (adenine) in the 14 nucleotide target sequence.
Target sequence: T AA NN NN NN NN NN T
Golden Gate Cloning
Golden Gate Cloning exploits the ability of type IIs restriction enzymes (such as BsaI, BsmBI or BbsI) to produce 4 bp sticky ends right next to their binding sites, irrespective of the adjacent nucleotide sequence. Importantly, binding sites of type IIs restriction enzymes are not palindromic and therefore are oriented towards the cutting site. So, if a part is flanked by 4 bp overlaps and two binding sites of a type IIs restriction enzyme, which are oriented towards the centre of the part, digestion will lead to predefined sticky ends at each side of the part. In case multiple parts are designed this way and overlaps at both ends of the parts are chosen carefully, the parts align in a predefined order . In case a destination vector is added, that contains type IIs restriction sites pointing in opposite directions, the intermediate piece gets replaced by the assembled parts – magic! After transformation, the antibiotic resistance of the destination vector selects for the right clones. Golden Gate Cloning is typically performed as an all-in-one-pot reaction. This means that all DNA parts, the type IIs restriction enzyme and a ligase are mixed in a PCR tube and put into a thermocycler. By cycling back and forth 10 to 50 times between 37°C and 20°C, the DNA parts get digested and ligated over and over again. Digested DNA fragments are either religated into their plasmids or get assembled with other parts as described above. Since assembled parts lack restriction sites for the type IIs enzyme, the parts get “trapped” in the desired construct. This is the reason why Golden Gate Cloning assembles DNA fragments with such exceptional efficiency. We successfully used this approach to assemble whole TAL effectors vector from six different parts and cloned it into an expression vector – all in one reaction (see below).
To ligate your own TAL-Protein, pipette the following volumes in one PCR tube:
| Component | Volume |
| 6 Direpeats of your choice | 40,0 Femtomol = 60 ng |
| Backbone e. g. TAL-TF | 40,0 Femtomol = 170 ng |
| BsmBI | 1,5 µl |
| T4 DNA Ligase (60 u) | 1,0 µl |
| T4 DNA Ligase Buffer | 2,0 µl |
| Water, nuclease-free | up to 20 µl |
| Total vloume | 20 µl |
Use the following protocol to incubate the restriction-ligation mixture:
- 37°C for 5 min and 30°C for 5 min (repeat this step 13 times)
- 50°C for 10 min
- 80°C for 10 min
- store at 4°C
After the restriction-ligation you can transform the cells in your desired e.coli strain. Use LB-Agar plates with kanamycin to select your clones
Usage and Biology
Gene activation
This reporter system gives us a couple of advantages over standard egfp or luciferase systems. First of all the SEAP is secreated into the cell culture media, therefore we dont have to destroy our cells to measure, but just take a sample from the supernatant. We are also able to measure one culture multiple times, e.g. at two different time points. Another advantage is the measurement via photometer which makes the samples quantitive compareable.
Experimental design
The experiment was done with four different transfections, either no plasmid, only the TAL vector, only the SEAP plasmid or a cotransfection of both plasmids. The cells were seeded on a twelve well plate the day before in 500µl culture media per well. The transfection was done with CaCl2.
Activation of transcription
In theory, the TAL domain should bring the fused VP64 domain in close proximity to the minimal promotor to activate the transcription of the repoter gene SEAP. The phosphatase is secreated an acummulates in the cell culture media. After 24 and 48 hours we took samples from the media, kept them at -20°C, and subjected them two days later to photometric analysis.
As it is observable in the graph, co-transfection of cells with TAL and SEAP plasmids (++) yielded a high increase in SEAP activity, compared to the control samples. The graph shows the average value of three biological replicates with its standard deviation. We further performed a ttest (Table) to prove if our experiment is statistical significant. The yellow highlighted fields show the p-values for our double transfections. As it is clearly observable, the p-values range below a value of 0,05 which indicates that our TAL transcription factor is able to elevate the transcription of the SEAP gene in a statistical significant manner.
After addition of pNPP, the substrate of SEAP, the activity of SEAP was measured over a period of time. In the next image, the results of the first nine minutes of this measurement are shown. After this time, the OD of the double transfection (++) rose too high to be measured by our photometer. As it is clearly visible, the sample with the double transfection shows a profound increase in the OD. This points to the fact that great amounts of SEAP have been secreted into the cell culture media due to elevated gene expression. In the other samples almost no SEAP activity was measureable. The sample transfected with only the SEAP plasmid showed the highest OD but this effect was not statistically significant (p-value:0,25/0,51).
In the samples, that had been taken 48h after double transfection, the same effects could be demonstrated.
Furthermore, we reapeated the same experiment for a second time. The corresponding data can be viewed here:
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12COMPATIBLE WITH RFC[12]
- 21COMPATIBLE WITH RFC[21]
- 23COMPATIBLE WITH RFC[23]
- 25COMPATIBLE WITH RFC[25]
- 1000COMPATIBLE WITH RFC[1000]
This part can be used to build a 14 nucleotide Transactivator-like (TAL) protein. TAL- Proteins are DNA-targeting modules with repeating Domains, each one of them can bind a specific nucleotide. A plasmid set of 96 DiRepeats (Bba_K747000 to Bba_K747095) allows you to assemble your own specific nucleotide target sequence. Every DiRepeat is able to bind two specific nucleotides and is determined by his position in the 14 repeating Domains.
Designing a TAL-Protein: To build a functional Tal- Protein, you have to choose a 14 nucleotide target sequence. Be aware that the first and the fourteenth nucleotide of the sequence has to be a Thymin. The second to the thirteenth nucleotide can be determined by choosing six DiRepeats of the plasmid set: Bba_K747000 to Bba_K747015 predefines the nucleotide of the 2. and the 3. nucleotide. Bba_K747016 to Bba_K747031 predefines the nucleotide of the 4. and the 5. nucleotide. Bba_K747032 to Bba_K747047 predefines the nucleotide of the 6. and the 7. nucleotide. Bba_K747048 to Bba_K747063 predefines the nucleotide of the 8. and the 9. nucleotide. Bba_K747064 to Bba_K747079 predefines the nucleotide of the 10. and the 11. nucleotide. Bba_K747080 to Bba_K747095 predefines the nucleotide of the 12. and the 13. nucleotide.
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12COMPATIBLE WITH RFC[12]
- 21COMPATIBLE WITH RFC[21]
- 23COMPATIBLE WITH RFC[23]
- 25COMPATIBLE WITH RFC[25]
- 1000INCOMPATIBLE WITH RFC[1000]Illegal BsaI.rc site found at 166
| None |