Difference between revisions of "Part:BBa K525224"

Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
 
<partinfo>BBa_K525224 short</partinfo>
 
<partinfo>BBa_K525224 short</partinfo>
 +
 
S-layers (crystalline bacterial surface layer) are crystal-like layers consisting of multiple protein monomers and can be found in various (archae-)bacteria. They constitute the outermost part of the cell wall. Especially their ability for self-assembly into distinct geometries is of scientific interest. At phase boundaries, in solutions and on a variety of surfaces they form different lattice structures. The geometry and arrangement is determined by the C-terminal self assembly-domain, which is specific for each S-layer protein. The most common lattice geometries are oblique, square and hexagonal. By modifying the characteristics of the S-layer through combination with functional groups and protein domains as well as their defined position and orientation to eachother (determined by the S-layer geometry) it is possible to realize various practical applications ([http://onlinelibrary.wiley.com/doi/10.1111/j.1574-6968.2006.00573.x/full Sleytr ''et al.'', 2007]).
 
S-layers (crystalline bacterial surface layer) are crystal-like layers consisting of multiple protein monomers and can be found in various (archae-)bacteria. They constitute the outermost part of the cell wall. Especially their ability for self-assembly into distinct geometries is of scientific interest. At phase boundaries, in solutions and on a variety of surfaces they form different lattice structures. The geometry and arrangement is determined by the C-terminal self assembly-domain, which is specific for each S-layer protein. The most common lattice geometries are oblique, square and hexagonal. By modifying the characteristics of the S-layer through combination with functional groups and protein domains as well as their defined position and orientation to eachother (determined by the S-layer geometry) it is possible to realize various practical applications ([http://onlinelibrary.wiley.com/doi/10.1111/j.1574-6968.2006.00573.x/full Sleytr ''et al.'', 2007]).
  

Revision as of 22:08, 21 September 2011

S-layer cspB from Corynebacterium halotolerans with TAT-sequence, PT7 and RBS

S-layers (crystalline bacterial surface layer) are crystal-like layers consisting of multiple protein monomers and can be found in various (archae-)bacteria. They constitute the outermost part of the cell wall. Especially their ability for self-assembly into distinct geometries is of scientific interest. At phase boundaries, in solutions and on a variety of surfaces they form different lattice structures. The geometry and arrangement is determined by the C-terminal self assembly-domain, which is specific for each S-layer protein. The most common lattice geometries are oblique, square and hexagonal. By modifying the characteristics of the S-layer through combination with functional groups and protein domains as well as their defined position and orientation to eachother (determined by the S-layer geometry) it is possible to realize various practical applications ([http://onlinelibrary.wiley.com/doi/10.1111/j.1574-6968.2006.00573.x/full Sleytr et al., 2007]).


Usage and Biology

S-layer proteins can be used as scaffold for nanobiotechnological applications and devices by e.g. fusing the S-layer's self-assembly domain to other functional protein domains. It is possible to coat surfaces and liposomes with S-layers. A big advantage of S-layers: after expressing in E. coli and purification, the nanobiotechnological system is cell-free. This enhances the biological security of a device.


Important parameters

Experiment Characteristic Result
Expression (E. coli) Localisation Cell membrane
Compatibility E. coli KRX
Induction of expression L-rhamnose for induction of T7 polymerase
Specific growth rate (un-/induced) 0.251 h-1 / 0.157 h-1
Doubling time (un-/induced) 2.76 h / 4.42 h

After processing:

Molecular weight: 50.6 kDa

Theoretical pI: 4.25


Sequence and Features


Assembly Compatibility:
  • 10
    INCOMPATIBLE WITH RFC[10]
    Illegal PstI site found at 440
  • 12
    INCOMPATIBLE WITH RFC[12]
    Illegal PstI site found at 440
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal BglII site found at 1191
    Illegal XhoI site found at 647
  • 23
    INCOMPATIBLE WITH RFC[23]
    Illegal PstI site found at 440
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal PstI site found at 440
    Illegal NgoMIV site found at 314
    Illegal NgoMIV site found at 1403
    Illegal AgeI site found at 89
    Illegal AgeI site found at 305
    Illegal AgeI site found at 546
    Illegal AgeI site found at 593
  • 1000
    INCOMPATIBLE WITH RFC[1000]
    Illegal BsaI site found at 995
    Illegal BsaI.rc site found at 302
    Illegal BsaI.rc site found at 680
    Illegal BsaI.rc site found at 1082


Expression in E. coli

The CspB gen was fused with a monomeric RFP (BBa_E1010) using [http://2011.igem.org/Team:Bielefeld-Germany/Protocols#Gibson_assembly Gibson assembly] for characterization.

The CspB|mRFP fusion protein was overexpressed in E. coli KRX after induction of T7 polymerase by supplementation of 0,1 % L-rhamnose using the [http://2011.igem.org/Team:Bielefeld-Germany/Protocols/Downstream-processing#Expression_of_S-layer_genes_in_E._coli autinduction protocol] from promega.

Figure 1: Growthcurve of E. coli KRX expressing the fusion protein of CspB and mRFP with and without induction. A curve depicting KRX wildtype is shown for comparsion.
Figure 2: RFU to OD600 ratio of E. coli KRX expressing the fusion protein of CspB and mRFP with and without induction. A curve depicting KRX wildtype is shown for comparsion.