Latest revision as of 14:59, 13 October 2021

Hyperstable enhanced bovine growth factor FGF2 which induces cell proliferation

Profile

Name: FGF2 HS
Base Pairs: 943 bp
Origin: Escherichia coli, synthetic
Parts: RBS, Lac Operator, Promoter, Thioredoxin, Enterokinase site, 6xHis-tag, FGF2 HS,Terminator
Properties:Thermostably enhanced bovine growth factor which induces cell proliferation.

Sequence & Features

Usage & Biology

Fibroblast growth factor 2 (FGF2) is one of 19 known members of the mammalian FGF family, involved in morphogenesis, development, angiogenesis and wound healing [1]. It is a mitogen and was first isolated in 1974, from the bovine pituitary and in 1988 human FGF2 was described for the first time [2]. There are four different FGF receptor tyrosine kinases (FGFR), to which FGFs bind and induce cell signaling. FGF2 binds FGFR1 and FGFR2 to induce proliferation [3]. FGFR2 consists of an extracellular domain, a transmembrane helix, and a catalytic intracellular tyrosine kinase domain (plotnikov 2020). The extracellular domain of the receptor consists of three immunoglobulin-like domains. FGF2 binds to domain 2 (D2) and domain 3 (D3), and the linker region connects the two domains (plotnikov 2020) (figure 1).

Figure 1. Crystal structure of FGF2 (green) bound to FGFR2 (cyan). PDB: 1EV2.

When FGF2 binds to the extracellular part of the receptor it causes the receptor to dimerise with another FGF-bound FGFR2, leading to conformational changes which activates the receptor in its intracellular domain and cell signaling is initiated [4]. Through an intracellular signaling cascade gene regulation occurs in favour of cell proliferation, resulting in cell growth [4] (figure 2).

Figure 2. Schematic of FGF2 receptor binding cell signaling induction.

Inducing cell growth through FGF2 signaling is utilized in the field of cellular agriculture, where the growth factor is used in the serum-free growth medium for cultivating meat. Similar to in a biological system, FGF2 induces cell growth when cultivating meat in a bioreactor. However, growth media is expensive, 55-95% of the production cost of cultivated meat comes from the growth medium [5]. To make serum-free media economically feasible on an industrial scale, the medium needs to be optimized. Being one of the most important and most expensive components, FGF2 is one of the targets for improvement [6].

To enable an enhanced bovine FGF2 for research, a biobrick system to express hyperstable bovine FGF2 has been designed and tested. This part will make a hyperstable version of FGF2 more accessible to support future research on medium optimization within cellular agriculture.

Design

This part was designed by applying the nine point mutations described previously that were shown to increase the thermal stability and overall effects both in vivo and in vitro of FGF2 [7]. Despite the fact that these nine point mutations were developed in human FGF2 [7], the team decided to apply them to the bovine FGF2 due to the high similarity between the human growth factor and its bovine counterpart [8]. This was done by introducing the same amino acid changes in the same positions of the amino acid sequence of the protein.

Experimental results

Biobrick Assembly

The FGF2 biobrick part was designed inside a pUC plasmid together with the basic parts T7 promoter (BBa_J64997), Lac operator (BBa_K3599001) T7 RBS (BBa_K3257011), T7 T_phi terminator (BBa_B0016). To increase solubility of the protein during expression and purification, the FGF2 gene was fused with thioredoxin (BBa_K3934008), and to enable protein purification a 6xHis-tag (BBa_K3934015) was added. An enterokinase site (BBa_K3934016) was added to cleave off the 6xHis-tag and thioredoxin. The pUC plasmid also contains a gene for ampicillin resistance. The design was ordered from Integrated DNA Technologies (IDT).

The biological system used for biobrick assembly was E. coli DH5α competent cells. A T_phi terminator, an NdeI restriction site and an PstI restriction site were added to the 5’ end and the 3’ end of the FGF2 construct using PCR primers. The restriction sites and terminator were part of the primer overhang sequences. The PCR modified construct was treated with NdeI and PstI and ligated into a pET vector [9][10] containing an IPTG inducible T7 promoter, a Lac operator, an RBS and a kanamycin resistance gene. The plasmid was re-ligated using DNA ligase and transformed into E. coli DH5α. To remove the risk of religation of the pET vector, the restriction enzyme treated pET was run through gel electrophoresis and the band corresponding to the part of the plasmid to use was extracted with gel purification. The properly assembled plasmid (figure 3) was verified using Sanger sequencing Mix2Seq Kit from Eurofins Genomics and then transformed into E. coli BL21 (DE3) pLysS competent cells from Promega which are optimized for protein expression. Transformation was also done using NEB BL21 (DE3) cells.

Figure 3. Assembled biobrick vector.

Overexpression

To overexpress the plasmid, overnight cultures of BL21 (DE3) pLysS cells containing the FGF2 plasmid were inoculated in 37 °C with 150 rpm shaking in LB medium with 50µg kanamycin until OD600 reached 0.5-0.6. To induce expression, 1 mM Isopropyl-β-D-thiogalactopyranoside (IPTG) was added to the cultures, one culture received no IPTG induction and served as a negative control. The cultures were inoculated in the same conditions as previously for 6 h. The cells were then boiled in sample buffer (125 mM Tris HCl pH 6.8, 20% glycerol, 4% SDS, 10% β-mercaptoethanol, 0.5 mg/mL bromophenol blue) to lyse the cells, and the protein expression was analysed using SDS-PAGE to confirm successful overexpression of FGF2 (figure 4). A 12% polyacrylamide gel containing the samples was submitted to 200 V and 0.04 A for 90 minutes. The process was repeated with E. coli BL21 (DE3) competent cells from NEB.

Figure 4. SDS-PAGE gel of FGF2 proteins expressed in E. coli (DE3) cells by induction with IPTG. From the left: protein ladder, un-induced FGF2 HS, FGF2 HS induced with 1 mM IPTG. Bands corresponding to the size of FGF2 HS (30.8 kDa) are visible for induced cells but not for un-induced cells.

Purification

After having confirmed expression, the protein was purified using immobilized metal ion affinity chromatography (IMAC). First the IPTG induced cultures were spun down, and the pellet resuspended in lysis buffer (10 mM TRIS HCl pH 7.5, 10 mM MgCl2, 200 mM NaCl). The cells then underwent cell lysis in a cell disruptor (One Shot, by Constant Systems, UK) and after centrifugation the supernatant containing all soluble proteins, including FGF2, was collected. His GraviTrap columns (from Cytiva) were used, charged with nickel to which the 6xHis-Tag attached to the FGF2 binds, but the rest of the E. coli cell protein flows through. The column was equilibrated with lysis buffer and the lysate was added. The flow through was collected and then the column was washed with lysis buffer to remove any non-FGF2 proteins that might have gotten stuck in the column, after which the flow through was collected. To elute the bound FGF2 from the column, elution buffer was added (20 mM TRIS HCl pH 7.5, 10 mM MgCl2, 200 M NaCl, 500 mM imidazole pH 7.5). The imidazole outcompetes FGF2 in binding to the Ni, so the FGF2 protein detaches and can be collected as the solution flows through the column.

The clear lysate, sample flow through, the wash and the elution was run on an SDS-PAGE gel to verify that FGF2 bound to the column and was eluted when adding imidazole. A 12% polyacrylamide gel containing the samples was submitted to 200 V and 0.04 A for 90 minutes. A band of approximately 38 kDa was visible in the elution fraction indicating that we have purified FGF2 protein (figure 5&6).

Figure 5. The Promega E. coli BL21 (DE3) cells containing the pET vector with wt FGF2 were lysed using a french press. The lysate and pellet obtained were analyzed through an SDS PAGE. The 12% polyacrylamide gel containing the samples was submitted to 200 V and 0.04 A for 90 minutes. The gel was stained with coomassie brilliant blue. Lane 1: other FGF2 variant, 3:FGF2 HS wash, 4: molecular weight marker, 5-7: other FGF2 variants, 8: FGF2 HS flow through, 9-10: other FGF2 variants.

Figure 6. The Promega E. coli BL21 (DE3) cells containing the pET vector with wt FGF2 were lysed using a french press. The lysate and pellet obtained were analyzed through an SDS PAGE. The 12% polyacrylamide gel containing the samples was submitted to 200 V and 0.04 A for 90 minutes. The gel was stained with coomassie brilliant blue. Lane 1-2: other FGF2 variants, 3: FGF2 HS clear lysate, 4: molecular weight marker, 5-7: other FGF2 variants, 8: FGF2 HS flow through, 9-10: other FGF2 variants.

References

[1] A. N. Plotnikov, S. R. Hubbard, J. Schlessinger, and M. Mohammadi, ‘Crystal Structures of Two FGF-FGFR Complexes Reveal the Determinants of Ligand-Receptor Specificity’, Cell, vol. 101, no. 4, pp. 413–424, May 2000, doi: 10.1016/S0092-8674(00)80851-X.
[2] L. Benington, G. Rajan, C. Locher, and L. Y. Lim, ‘Fibroblast Growth Factor 2—A Review of Stabilisation Approaches for Clinical Applications’, Pharmaceutics, vol. 12, no. 6, p. 508, Jun. 2020, doi: 10.3390/pharmaceutics12060508.
[3] W. Lim, H. Bae, F. W. Bazer, and G. Song, ‘Stimulatory effects of fibroblast growth factor 2 on proliferation and migration of uterine luminal epithelial cells during early pregnancy’, Biol. Reprod., vol. 96, no. 1, pp. 185–198, Jan. 2017, doi: 10.1095/biolreprod.116.142331.
[4] Y. Xie et al., ‘FGF/FGFR signaling in health and disease’, Signal Transduct. Target. Ther., vol. 5, no. 1, pp. 1–38, Sep. 2020, doi: 10.1038/s41392-020-00222-7.
[5] E. Swartz. “Meeting the Needs of the Cell-Based Meat Industry,” American Institute of Chemical Engineers (AIChE), Okt. 2019. Accessed on: Okt. 04, 2021. [Online]. Available: https://gfi.org/wp-content/uploads/2021/01/Cell-Based_Meat_CEP_Oct2019.pdf
[6] L. Specht. “An analysis of culture medium costs and production volumes for cultivated meat,” The Good Food Institute, Feb. 09, 2020. Accessed on: Okt. 04, 2021. [Online]. Available: https://gfi.org/wp-content/uploads/2021/01/clean-meat-production-volume-and-medium-cost.pdf
[7] P. Dvorak et al., ‘Computer-assisted engineering of hyperstable fibroblast growth factor 2’, Biotechnol. Bioeng., vol. 115, no. 4, pp. 850–862, Apr. 2018, doi: 10.1002/bit.26531.
[8] J. A. Abraham et al., ‘Human basic fibroblast growth factor: nucleotide sequence and genomic organization’, EMBO J., vol. 5, no. 10, pp. 2523–2528, Oct. 1986.
[9] L. Du, R. Gao, and A. C. Forster, “Engineering multigene expression in vitro and in vivo with small terminators for T7 RNA polymerase,” Biotechnol. Bioeng., vol. 104, no. 6, pp. 1189–1196, 2009, doi: 10.1002/bit.22491.
[10] L. Du, S. Villarreal, and A. C. Forster, “Multigene expression in vivo: Supremacy of large versus small terminators for T7 RNA polymerase,” Biotechnol. Bioeng., vol. 109, no. 4, pp. 1043–1050, 2012, doi: 10.1002/bit.24379.