Part:BBa_K5250007
DGC WspR R242A + Tag
Usage and Biology
A mutation in the diguanylate cyclase (DGC) enzyme DGC WspR from the metabolism of Pseudomonas aeruginosa.
The wild type diguanylate cyclase (DGC) enzyme from the metabolism of Pseudomonas aeruginosa produces the second messenger cyclic di-GMP which is involved in biofilm formation. A biofilm is a community of bacteria that adhere to surfaces and produce a matrix of polysaccharides. These are influenced by c-di-GMP.
We decided to elevate the intracellular c-di-GMP levels of Pseudomonas species IsoF through the introduction of a DGC. Various DGCs contain a conserved GG(D)EF domain and within this domain there is a so-called I-site (inhibitory site). The I-site is an allosteric binding site specific for c-di-GMP. When c-di-GMP binds there, it reduces the enzyme’s activity and thereby prevents further production of c-di-GMP. C-di-GMP thus acts as a non-competitive inhibitor for the DGC. This negative feedback serves as a self-regulatory mechanism of the intracellular c-di-GMP concentration. Targeting the inhibitory site and preventing c-di-GMP from binding to the I-site may result in an increase in the enzyme’s activity.
Altering the inhibitory site and thus preventing c-di-GMP from binding to it has been successfully done in the DGC from Pseudomonas aeruginosa, WspR. Nabanita De. et al. [1] discovered that c-di-GMP binds to two arginine residues (R242 and R198) within the GGDEF domain of the WspR diguanylate cyclase. They created two site-directed mutants of the enzyme by substituting one of the arginine residues by alanine. The purified enzymes showed higher activity and no detectable c-di-GMP was bound to the I-site, indicating that the binding of c-di-GMP and therefore inhibition of the enzyme was disrupted in both mutations [1].
Characterization
In our project we compared two wild type DGCs with three mutations, among which also DGC R196A. The ultimate goal of our genetic circuit is to increase biofilm production in P. sp. IsoF. We try to achieve that by boosting c-di-GMP production through overexpression of a DGC and knock-down of phosphodiesterase (PDE), an enzyme that degrades c-di-GMP. To test our DGC overexpression module, we applied a c-di-GMP assay and a biofilm staining experiment in which we evaluated 5 different DGCs and one PDE knock-down strain.
Cyclic di-GMP assay
In our project we compared the activity of five different DGCs, two wild type DGCs (PisoF_00565 and WspR) with three mutations (PisoF_00565 R196A, PisoF_00565 R240A, DGC WspR R242A). To test our DGC overexpression module, we applied a c-di-GMP assay and a biofilm staining experiment in which we evaluated the five different DGCs and one PDE knock-down strain.
Experiment
For the c-di-GMP assay we decided to use the kit from Lucerna Technologies which is based on a fluorescence signal generated by c-di-GMP. The c-di-GMP sensor used in this kit consists of a c-di-GMP riboswitch and a Spinach aptamer. When c-di-GMP binds to the riboswitch, it stabilizes the Spinach aptamer. This allows the fluorophore DFHBI-1T from the kit to bind and emit a fluorescent signal. The fluorescence is then measured using a fluorescence plate reader.
Results
Figure 1: Fluorescence intensity of the strains tested in the c-di-GMP assay.
Figure 1. above shows the results from the first two c-di-GMP assays put together in one graph. The first six strains are our PDE and DGC constructs that we created with the intention of enhancing biofilm production. We included three negative controls - wild type P. sp. IsoF, P. sp. IsoF with the pBBR1MCS5 backbone, and a strain that overexpresses a PDE plasmid. We also included a positive control, P. sp. IsoF DGC YedQ - a very potent DGC that causes a drastic increase in the biofilm production. All of these controls were also provided by our host lab. Despite these strains being known to work, and therefore used as controls, they exhibited unexpected c-di-GMP values. After analyzing our controls, we decided to handle our results with caution.
First, we wanted to assess whether the c-di-GMP level increases when the strains are induced with rhamnose, as our constructs are only activated when induced with rhamnose. If a change in c-di-GMP levels is observed, it would suggest that this change results from the introduced DGC. The PisoF DGC WspR R242 does not exhibit significant fluorescence compared to the control strains.
Our findings in this c-di-GMP assay underscore the need for additional experimentation to validate and better characterize these effects.
Biofilm staining
Since a biofilm, among other things, consists of a matrix of different polysaccharides, we decided to measure the production of polysaccharides as our second method to quantify biofilm formation. We decided to stain the polysaccharides produced by the different P. sp. IsoF strains, using a Congo Red derived dye that stains different polysaccharides and was kindly provided by our host lab. The fluorescence of the stained strains was measured under a microscope.
Experiment
We evaluated the effect of our engineered DGCs, including the P. sp. IsoF R196A mutation, and the PDE knock-down strain. All of those are expressed after a rhamnose inducible promoter (BBa_K914003) from the iGEM Parts registry. We prepared two square plates with the Congo red derived dye. Rhamnose was added in only one of the plates. As negative controls we took a wild type P. sp. IsoF and a P. sp. IsoF strain with an empty pBBR1MCS5 plasmid, and PisoF DGC YedQ - as a positive control.
We induced one set of overnight cultures of these strains with rhamnose, while the second uninduced set of cultures served as a control to test whether the rhamnose itself influences intracellular c-di-GMP concentration. We adjusted the cultures to an optical density of 1 and plated each adjusted strain onto the respective induced or uninduced plate. After a 3-day incubation period, the fluorescence of the stained polysaccharides of each strain was measured using a fluorescence microscope. The images were processed and analyzed using imageJ. Two repeats were made for each strain and condition (rhamnose or no rhamnose).
Results
Figure 1: Fluorescence data of the biofilm staining assay. The figure illustrates the mean fluorescence for each strain.
As expected, the negative control strains showed the lowest fluorescence and the YedQ positive control showed the highest fluorescence. Among the other tested strains, three showed a significant increase in fluorescence: P. sp. IsoF DGC PisoF_00565 wild type, P. sp. DGC WspR and P. sp. DGC WspR R242A.
The strain expressing the mutated WspR DGC (P. sp. WspR R242A) showed the highest fluorescence level, even exceeding the positive control (P. sp. isoF YedQ). This suggests that the mutated WspR DGC leads to the greatest increase in polysaccharide production and, consequently, the most significant enhancement in biofilm formation.
Throughout different experiments, we observed that the strains carrying different DGCs had reduced growth when induced with rhamnose. We have two hypotheses of why this could be the case. Firstly, it could be that rhamnose is toxic to bacteria in high concentrations. Alternatively, the overexpression of a DGC leading to the overproduction of c-di-GMP might be costly for the bacteria and thus inhibits their growth. Additionally, during the biofilm staining assay, we were unable to measure the OD of each strain, meaning that we don’t know how well each strain grew on the plate. As a result, we could not normalize the polysaccharide production for the strains’ OD, which might have affected the results.
To further analyze the results, we applied a linear model with bacterial strains as the explanatory variable (10 categories) and mean fluorescence as the response variable. The model showed a statistically significant increase in the fluorescence of the following strains:
The adjusted R-squared for the model is 0.9733, with an F-statistic of 78.35. The explained variance from the bacterial train variable is 18’046.4, while an unexplained variance of 259.1 remains, with an overall p-value of 2.062e-07.
In conclusion, the data from these biofilm staining assays confirm that certain DGCs, particularly WspR and its mutated form WspR R242A, significantly enhance polysaccharide production. WspR R242A demonstrates the greatest increase in biofilm formation overall.
References
[1] De, N., Pirruccello, M., Krasteva, P. V., Bae, N., Raghavan, R. V., & Sondermann, H. (2008). Phosphorylation-Independent Regulation of the Diguanylate Cyclase WSPR. PLoS Biology, 6(3), e67. https://doi.org/10.1371/journal.pbio.0060067
Sequence and Features
- 10INCOMPATIBLE WITH RFC[10]Illegal EcoRI site found at 760
Illegal PstI site found at 202
Illegal PstI site found at 427
Illegal PstI site found at 499 - 12INCOMPATIBLE WITH RFC[12]Illegal EcoRI site found at 760
Illegal PstI site found at 202
Illegal PstI site found at 427
Illegal PstI site found at 499 - 21INCOMPATIBLE WITH RFC[21]Illegal EcoRI site found at 760
- 23INCOMPATIBLE WITH RFC[23]Illegal EcoRI site found at 760
Illegal PstI site found at 202
Illegal PstI site found at 427
Illegal PstI site found at 499 - 25INCOMPATIBLE WITH RFC[25]Illegal EcoRI site found at 760
Illegal PstI site found at 202
Illegal PstI site found at 427
Illegal PstI site found at 499
Illegal NgoMIV site found at 124
Illegal NgoMIV site found at 1026
Illegal NgoMIV site found at 1032 - 1000COMPATIBLE WITH RFC[1000]
| None |