Composite

Part:BBa_K5115087

Designed by: Yi Shi   Group: iGEM24_Fudan   (2024-09-19)


F1v-NixA

contributed by Fudan iGEM 2023

Introduction

This part combined BBa_K5115085(F1v)with BBa_K5115071(NixA). In this way, the NixA is dimerized on the cell membrane.

Characterization

contributed by Fudan iGEM 2024
Figure 1. The alphafold structure of F1v-NixA.[1]

contributed by Fudan iGEM 2024
Figure 2. Comparison of Ni²⁺ Uptake Efficiency by Different ‘’E. coli’’ in 20 mg/L Ni²⁺.

The graph shows the percentage of Ni²⁺ absorbed by ‘’E. coli’’ expressing different constructs after 5 hours of growth in a medium containing 20 mg/L Ni²⁺ (‘’E. coli’’ strain: BL21 DE3, induced with 1 mM IPTG). Ni²⁺ uptake was calculated based on the difference between initial and final concentrations in the supernatant, divided by 20 mg/L. The optical density (OD₆₀₀) of the initial bacterial suspension was adjusted to 0.5. Culture for 5 hours, at 37°C with a rotating speed at 220 rpm. Regarding NixA-F1v and F1v-NixA, AP20187 is a synthetic dimerizer that can be used to induce homodimerization of F1v domain. Three biological replicates were performed for each condition, and error bars represent the standard errors of the means (SEM) of these replicates. ANOVA test shows that all constructs increase Ni²⁺ uptake significantly compared to the control. Bacteria expressing NixA-F1v exhibit the highest Ni²⁺ uptake efficiency (p = 0.0306, Dunnett’s post-test).

contributed by Fudan iGEM 2024
Figure 3. Comparison of Ni²⁺ Uptake Efficiency by Different ‘’E. coli’’ in 30 mg/L Ni²⁺.

The graph shows the percentage of Ni²⁺ absorbed by ‘’E. coli’’ expressing different constructs after 5 hours of growth in a medium containing 30 mg/L Ni²⁺ (‘’E. coli’’ strain: BL21 DE3, induced with 1 mM IPTG). Ni²⁺ uptake was calculated based on the difference between initial and final concentrations in the supernatant, divided by 30 mg/L. The optical density (OD₆₀₀) of the initial bacterial suspension was adjusted to 0.5. Culture for 5 hours, at 37°C with a rotating speed at 220 rpm. Regarding NixA-F1v and F1v-NixA, AP20187 is a synthetic dimerizer that can be used to induce homodimerization of F1v domain. Three biological replicates were performed for each condition, and error bars represent the standard errors of the means (SEM) of these replicates. ANOVA test shows that all constructs increase Ni²⁺ uptake significantly compared to the control. Bacteria expressing NixA-F1v exhibit the highest Ni²⁺ uptake efficiency (p = 0.0052, Dunnett’s post-test).

contributed by Fudan iGEM 2024
Figure 4. Comparison of Ni²⁺ Uptake Efficiency by Different E. coli in 50 mg/L Ni²⁺.

The graph shows the percentage of Ni²⁺ absorbed by ‘’E. coli’’ expressing different constructs after 5 hours of growth in a medium containing 50 mg/L Ni²⁺ (‘’E. coli ‘’strain: BL21 DE3, induced with 1 mM IPTG). Ni²⁺ uptake was calculated based on the difference between initial and final concentrations in the supernatant, divided by 50 mg/L. The optical density (OD₆₀₀) of the initial bacterial suspension was adjusted to 0.5. Culture for 5 hours, at 37°C with a rotating speed at 220 rpm. Regarding NixA-F1v and F1v-NixA, AP20187 is a synthetic dimerizer that can be used to induce homodimerization of F1v domain. Three biological replicates were performed for each condition, and error bars represent the standard errors of the means (SEM) of these replicates. ANOVA test shows that all constructs increase Ni²⁺ uptake significantly compared to the control. Bacteria expressing NixA-F1v exhibit the highest Ni²⁺ uptake efficiency (p = 0.0020, Dunnett’s post-test).


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]


References

  1. Abramson, J., Adler, J., Dunger, J., Evans, R., Green, T., Pritzel, A., Ronneberger, O., Willmore, L., Ballard, A. J., Bambrick, J., Bodenstein, S. W., Evans, D. A., Hung, C.-C., O’Neill, M., Reiman, D., Tunyasuvunakool, K., Wu, Z., Žemgulytė, A., Arvaniti, E., … Jumper, J. M. (2024). Accurate structure prediction of biomolecular interactions with AlphaFold 3. Nature, 630(8016), 493–500.
[edit]
Categories
Parameters
None