Difference between revisions of "Part:BBa K1761003"

(Bioluminiscence)
(characterization)
Line 34: Line 34:
  
 
== Characterization ==
 
== Characterization ==
The presence of mNeonGreen was tested with a fluorescence assay. This was done with the construct containing both OmpX and mNeonGreen and with mNeonGreen alone.
+
mNeonGreen was characterized by fusing it to an outer membrane protein (see below) as well as by expressing it on itself in the cytosol. For the expression of mNeonGreen in the cytosol, mNeonGreen was inserted after the constitutive promotor J23101. Even though no RBS was introduced into the composite part, the cells still showed fluorescence which could be measured with the Cary Eclipse spectrofluorometer for both an in vivo excitation scan and a in vivo emission scan.
 +
 
 +
 
 +
== In vivo excitation scan ==
 +
An in vivo excitation scan was conducted for the mNeonGreen containing cells (see Figure 4). Biological triplicates were measured. The cells were measured at an OD of 2.0 with the Cary Eclipse spectrofluorometer and showed a peak at approximately 517 nm. The first negative control, BL21(DE3) cells transformed with an empty PSB1C3 vector, showed no such fluorescence even though light intensity was measured. The second negative control showed almost no light intensity, indicating that the light intensity for the first negative control is a result of light scattering.
 +
 
 +
[[File:TU_Eindhoven_mNeonGreen_ExcitationScan.png]]
 +
 
 +
''Figure 4: the pSB1C3 vector containing mNeonGreen vector was transformed into BL21(DE3) cells. These cells were measured at an OD of 2.0. Three biological triplicates were obtained which all showed peaks at approximately 517 nm. The first negative control, cells with an empty pSB1C3 plasmid, do not show such a peak. The second negative control, pure PBS, showed a very low intensity.''
 +
 +
 
 +
== In vivo emission scan ==
 +
An in vivo emission scan was conducted for the mNeonGreen containg cells (see Figure 5). The test was conducted for the same biological triplicate as the in vivo excitation scan. Cells were measured at an OD of 2.0 with the Cary Eclipse spectrofluorometer and showed an excitation peak at approximately 506 nm.
 +
 
 +
[[File:TU_Eindhoven_mNeonGreen_EmissionScan.png]]
 +
 
 +
''Figure 5: An in vivo emissions scan was conducted for mNeonGreen in the BL21(DE3) cells. The cells containing mNeonGreen show a peak at 506 nm. The first negative control, BL21(DE3) cells with the empty pSB1C3 plasmid do not show such a peak. The second negative control, pure PBS, shows almost no fluorescence. The higher level of fluorescence of the BL21(DE3) cells is possibly caused by autofluorescence.''
 +
 
 +
 
 +
== Spectra of the mNeonGreen biological triplicate ==
 +
For the mNeonGreen-containing BL21(DE3) cells, emission and excitation spectra were obtained. These spectra are shown below in Figure 6, 7 and 8.
 +
 +
[[File:TU_Eindhoven_mNeonGreen_Construct1.png]]
 +
 
 +
''Figure 6: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 1''
 +
 
 +
[[File:TU_Eindhoven_mNeonGreen_Construct2.png]]
 +
 
 +
''Figure 7: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 2''
 +
 
 +
[[File:TU_Eindhoven_mNeonGreen_Construct3.png]]
 +
 
 +
''Figure 8: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 3''
 +
 
 +
 
 +
== Measurement with the Tecan Safire2 platereader ==
 +
In addition to measurement with the spectrofluorometer, we measured fluorescence of the mNeonGreen-containing cells with the Tecan Safire2 plate-reader. The cells were diluted to an OD of approximately 1.5 before they were loaded in the wells. For the three biological replicates, three technical replicates were measured. The average of these three technical replicates was used for the graph in Figure 9.
 +
 
 +
[[File:TU_Eindhoven_mNeonGreen_Safire2.png]]
 +
 
 +
''Figure 9: The data for the three biological replicates shows high intensity peaks at approximately 517 nm. Three technical replicates for each of the biological replicates were measured. The average of these three technical replicates was used for the shown spectra. Excitation was performed at 480 nm with a bandwidth of 5nm. Emission was measured from 500 nm till 600 nm with a bandwidth size of 7nm.''
 +
 
 +
 
 +
== Characterization part of a construct ==
 +
As already mentioned, mNeonGreen was also characterized by fusing it to an outer membrane protein by preforming a fluorescence assay.
 
For all the experiments we used the following vectors: pETDuet-1 with a construct inserted (OmpX + intracellular protein) or pSB1C3 with a strong promotor and mNeonGreen inserted, and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.
 
For all the experiments we used the following vectors: pETDuet-1 with a construct inserted (OmpX + intracellular protein) or pSB1C3 with a strong promotor and mNeonGreen inserted, and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.
  
  
 
== Fluorescence Confirmation ==
 
== Fluorescence Confirmation ==
To confirm whether mNeonGreen is present in the bacteria, a fluorescence assay was performed. Excitation took place at a wavelength of 480 nm with a laser. Emission was read out at 517 nm. From this experiment, it can be concluded that mNeonGreen is present and works (see Figure 4). This was also tested with both OmpX – mNeonGreen and OmpX – NanoLuc inserted, which gave the same results (see Figure 5).
+
To confirm whether mNeonGreen is present in the bacteria, a fluorescence assay was performed. Excitation took place at a wavelength of 480 nm with a laser. Emission was read out at 517 nm. From this experiment, it can be concluded that mNeonGreen is present and works (see Figure 10). This was also tested with both OmpX – mNeonGreen and OmpX – NanoLuc inserted, which gave the same results (see Figure 11).
 
For more information about how to perform a fluorescence assay, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].
 
For more information about how to perform a fluorescence assay, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].
  
 
[[File:TU_Eindhoven_Results_Fluorescence_mNeonGreen.png]]
 
[[File:TU_Eindhoven_Results_Fluorescence_mNeonGreen.png]]
  
''Figure 4: Fluorescence results of OmpX - mNeonGreen''
+
''Figure 10: Fluorescence results of OmpX - mNeonGreen''
  
 
[[File:TU_Eindhoven_Results_Fluorescence_mNeonGreen_and_NanoLuc.png]]
 
[[File:TU_Eindhoven_Results_Fluorescence_mNeonGreen_and_NanoLuc.png]]
  
''Figure 7: Fluorescence results of OmpX -mNeonGreen and OmpX - NanoLuc''
+
''Figure 11: Fluorescence results of OmpX -mNeonGreen and OmpX - NanoLuc''
  
 
== Bioluminescence Confirmation ==
 
== Bioluminescence Confirmation ==
To confirm whether mNeonGreen forms a good BRET (Bioluminescence resonance energy transfer) couple with NanoLuc, a bioluminescence measurement was performed (see Figure 8). In this experiment OmpX-NanoLuc's & OmpX-mNeonGreen's presence in the cells were tested by adding Nano-Glo substrate to the cells and measuring bioluminescence with the spectrophotometer. Figure 8 shows that OmpX-NanoLuc shows a peak characteristic for NanoLuc, indicating NanoLuc's presence within the cells. Moreover, the spectrogram shows a distinct shoulder near 517 nm, the emission wavelength of mNeongreen. Since no laser was used, excitation of mNeongreen can only be accomplished by NanoLuc so BRET (Bioluminescence resonance energy transfer) occured. This signal is measured when no click reaction is performed on the complex, meaning that this can be seen as the background noise of the sensor of iGEM team TU Eindhoven 2015. For more information about how to perform a bioluminescence measurement, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].
+
To confirm whether mNeonGreen forms a good BRET (Bioluminescence resonance energy transfer) couple with NanoLuc, a bioluminescence measurement was performed (see Figure 12). In this experiment OmpX-NanoLuc's & OmpX-mNeonGreen's presence in the cells were tested by adding Nano-Glo substrate to the cells and measuring bioluminescence with the spectrophotometer. Figure 8 shows that OmpX-NanoLuc shows a peak characteristic for NanoLuc, indicating NanoLuc's presence within the cells. Moreover, the spectrogram shows a distinct shoulder near 517 nm, the emission wavelength of mNeongreen. Since no laser was used, excitation of mNeongreen can only be accomplished by NanoLuc so BRET (Bioluminescence resonance energy transfer) occured. This signal is measured when no click reaction is performed on the complex, meaning that this can be seen as the background noise of the sensor of iGEM team TU Eindhoven 2015. For more information about how to perform a bioluminescence measurement, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].
  
 
[[File:TU_Eindhoven_results_bioluminiscence_neongreen_and_NanoLuc.png]]
 
[[File:TU_Eindhoven_results_bioluminiscence_neongreen_and_NanoLuc.png]]
  
''Figure 8: Bioluminiscence results NanoLuc and mNeonGreen.''
+
''Figure 12: Bioluminiscence results NanoLuc and mNeonGreen.''
  
 
<!-- Uncomment this to enable Functional Parameter display  
 
<!-- Uncomment this to enable Functional Parameter display  

Revision as of 23:22, 18 September 2015

mNeonGreen

mNeonGreen is a yellow-green fluorescent protein. For a fluorescene measurement, the mNeonGreen fluorophore can be excitated with a laser with a wavelenght of 480 nm and readed out at 517 nm.


Usage and Biology

mNeonGreen is a yellow-green fluorescent protein and is derived from a tetrameric fluorescent protein from cephalochordate Branchiostoma lanceolatum (see Figure 1). mNeonGreen is the brightest monomeric green of yellow fluorescent protein yet described and is an excellent fluorescence resonance energy transfer (FRET) acceptor for the newest cyan fluorescent proteins. [1]

TU Eindhoven mNeonGreen 3D-structure.png

Figure 1: Schamatic 3D structure of mNeonGreen

Gene Design

mNeonGreen was characterized by Shaner et al [1]. We inserted mNeonGreen in the pETDuet-1 vector together with OmpX and a BamHI-linker (see Figure 2) [1]. This linker is a 213 bp long flexible GGSGGS linker and by using the restriction enzyme BamHI, the linker can become 45 bp shorter. The BamHI-linker is inspired by the article "Quantitative Understanding of the Energy Transfer between Fluorescent Proteins Connected via Flexible Peptide Liners" by T.H. Evers et al from 29 August 2006. [2]

TU Eindhoven Construct OmpX mNeonGreen.png

Figure 2: Schematical overview of the expressed OmpX (1) with mNeonGreen (2) in the outer membrane of E.coli.


Sequence

The sequence of our mTurquoise2 part (see Figure 3) has been verified by sequencing at StarSeq. It contains the prefix and suffix with the correct restriction sites (EcoRI, XbaI, SpeI and PstI). mNeonGreen is 711 bp long.

TU Eindhoven mNeonGreen SnapGene.png

Figure 3: Snapgene plasmid overview of the BioBrick part BBa_K1761003. It shows the pSB1C3 vector with the prefix (containing the restriction sites EcoRI and XbaI), mNeonGreen and the suffix (containting the restiction sites SpeI and PstI).

Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]


Characterization

mNeonGreen was characterized by fusing it to an outer membrane protein (see below) as well as by expressing it on itself in the cytosol. For the expression of mNeonGreen in the cytosol, mNeonGreen was inserted after the constitutive promotor J23101. Even though no RBS was introduced into the composite part, the cells still showed fluorescence which could be measured with the Cary Eclipse spectrofluorometer for both an in vivo excitation scan and a in vivo emission scan.


In vivo excitation scan

An in vivo excitation scan was conducted for the mNeonGreen containing cells (see Figure 4). Biological triplicates were measured. The cells were measured at an OD of 2.0 with the Cary Eclipse spectrofluorometer and showed a peak at approximately 517 nm. The first negative control, BL21(DE3) cells transformed with an empty PSB1C3 vector, showed no such fluorescence even though light intensity was measured. The second negative control showed almost no light intensity, indicating that the light intensity for the first negative control is a result of light scattering.

TU Eindhoven mNeonGreen ExcitationScan.png

Figure 4: the pSB1C3 vector containing mNeonGreen vector was transformed into BL21(DE3) cells. These cells were measured at an OD of 2.0. Three biological triplicates were obtained which all showed peaks at approximately 517 nm. The first negative control, cells with an empty pSB1C3 plasmid, do not show such a peak. The second negative control, pure PBS, showed a very low intensity.

In vivo emission scan

An in vivo emission scan was conducted for the mNeonGreen containg cells (see Figure 5). The test was conducted for the same biological triplicate as the in vivo excitation scan. Cells were measured at an OD of 2.0 with the Cary Eclipse spectrofluorometer and showed an excitation peak at approximately 506 nm.

TU Eindhoven mNeonGreen EmissionScan.png

Figure 5: An in vivo emissions scan was conducted for mNeonGreen in the BL21(DE3) cells. The cells containing mNeonGreen show a peak at 506 nm. The first negative control, BL21(DE3) cells with the empty pSB1C3 plasmid do not show such a peak. The second negative control, pure PBS, shows almost no fluorescence. The higher level of fluorescence of the BL21(DE3) cells is possibly caused by autofluorescence.


Spectra of the mNeonGreen biological triplicate

For the mNeonGreen-containing BL21(DE3) cells, emission and excitation spectra were obtained. These spectra are shown below in Figure 6, 7 and 8.

TU Eindhoven mNeonGreen Construct1.png

Figure 6: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 1

TU Eindhoven mNeonGreen Construct2.png

Figure 7: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 2

TU Eindhoven mNeonGreen Construct3.png

Figure 8: Spectrum of mNeonGreen and constitutive promotor J23101, Construct 3


Measurement with the Tecan Safire2 platereader

In addition to measurement with the spectrofluorometer, we measured fluorescence of the mNeonGreen-containing cells with the Tecan Safire2 plate-reader. The cells were diluted to an OD of approximately 1.5 before they were loaded in the wells. For the three biological replicates, three technical replicates were measured. The average of these three technical replicates was used for the graph in Figure 9.

TU Eindhoven mNeonGreen Safire2.png

Figure 9: The data for the three biological replicates shows high intensity peaks at approximately 517 nm. Three technical replicates for each of the biological replicates were measured. The average of these three technical replicates was used for the shown spectra. Excitation was performed at 480 nm with a bandwidth of 5nm. Emission was measured from 500 nm till 600 nm with a bandwidth size of 7nm.


Characterization part of a construct

As already mentioned, mNeonGreen was also characterized by fusing it to an outer membrane protein by preforming a fluorescence assay. For all the experiments we used the following vectors: pETDuet-1 with a construct inserted (OmpX + intracellular protein) or pSB1C3 with a strong promotor and mNeonGreen inserted, and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.


Fluorescence Confirmation

To confirm whether mNeonGreen is present in the bacteria, a fluorescence assay was performed. Excitation took place at a wavelength of 480 nm with a laser. Emission was read out at 517 nm. From this experiment, it can be concluded that mNeonGreen is present and works (see Figure 10). This was also tested with both OmpX – mNeonGreen and OmpX – NanoLuc inserted, which gave the same results (see Figure 11). For more information about how to perform a fluorescence assay, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].

TU Eindhoven Results Fluorescence mNeonGreen.png

Figure 10: Fluorescence results of OmpX - mNeonGreen

TU Eindhoven Results Fluorescence mNeonGreen and NanoLuc.png

Figure 11: Fluorescence results of OmpX -mNeonGreen and OmpX - NanoLuc

Bioluminescence Confirmation

To confirm whether mNeonGreen forms a good BRET (Bioluminescence resonance energy transfer) couple with NanoLuc, a bioluminescence measurement was performed (see Figure 12). In this experiment OmpX-NanoLuc's & OmpX-mNeonGreen's presence in the cells were tested by adding Nano-Glo substrate to the cells and measuring bioluminescence with the spectrophotometer. Figure 8 shows that OmpX-NanoLuc shows a peak characteristic for NanoLuc, indicating NanoLuc's presence within the cells. Moreover, the spectrogram shows a distinct shoulder near 517 nm, the emission wavelength of mNeongreen. Since no laser was used, excitation of mNeongreen can only be accomplished by NanoLuc so BRET (Bioluminescence resonance energy transfer) occured. This signal is measured when no click reaction is performed on the complex, meaning that this can be seen as the background noise of the sensor of iGEM team TU Eindhoven 2015. For more information about how to perform a bioluminescence measurement, see our Protocol Page [http://2015.igem.org/Team:TU_Eindhoven/Project/Protocols].

TU Eindhoven results bioluminiscence neongreen and NanoLuc.png

Figure 12: Bioluminiscence results NanoLuc and mNeonGreen.


References

[1] N.C. Shaner et al, “A bright monomeric green fluorescent protein derived from Branchiostoma lanceolatum.,” Nature Methods, vol. 10, no. 5, pp. 407-409, Mar. 2013.

[2] T.H. Evers et al, “Quantitative Understanding of the Energy Transfer between Fluorescent Proteins Connected via Flexible Peptide Linkers.,” Biochemistry, vol. 45, no. 44, pp. 13183-92, Nov. 2006.