Part:BBa_K2062006
rhamnosyltransferase 2 [Pseudomonas aeruginosa]
Introduction
Rhamnolipids are a class of glycolipids characterized by a rhamnose moiety and a fatty acid tail. While rhamnolipids are produced in a variety of organisms, Pseudomonas aeruginosa is most frequently cited. In Pseudomonas aeruginosa, genes rhlA and rhlB are cooperative to from the complex rhlAB that codes for the enzyme rhamnosyltransferase 1. The enzyme rhamnosyltransferase 1 catalyzes the addition of a (hydroxyalkanoyloxy)alkanoic acid (HAA) fatty acid tail to a rhamnose sugar to produce a mono-rhamnolipid. Similarly, rhlC codes for the enzyme rhamnosyltransferase 2, which catalyzes an addition of another rhamnose moiety to a mono-rhamnolipid to form a di-rhamnolipid.
Rhamnolipids are predominantly known for their biosurfactant properties, which possesses industrial applications (cite). Di-rhamnolipids have also been shown to repel the Aedes aegypti mosquito (cite). In our investigation, we have confirmed with statistical significance that di-rhamnolipids repel Aedes aegypti. We have also shown with statistical significance that mono-rhamnolipids repel Aedes aegypti. The compatibility of rhamnolipids with human skin was also a main concern of ours—as rhamnolipids have been shown to be a virulence factor. We have shown that rhamnolipids are compatible with human keratinocytes in the presence of both Pseudomonas aeruginosa and Pseudomonas putida. Likewise, we have shown that rhamnolipids are compatible with Staphylococcus epidermidis—a skin microbiome organism. Lastly, we have confirmed the both mono-rhamnolipids and di-rhamnolipids are producible in Pseudomonas putida with the addition of rhlAB and rhlC, respectively.
P. putida, S. epidermidis, and rhamnolipids are compatible with human keratinocytes
Determination of rhamnolipid IC50
Keratinocytes, human skin cells, were grown for several days. When the cells were 80% confluent, they were seeded in 24 well plates at a density of 2.5105. The cells were weaned off of antibiotics the following day before they were treated with varying concentrations of rhamnolipids and the reagent MTS. The MTS assay reveals the cell viability of the cells. Using this information, the data was normalized and statistically analyzed to determine the keratinocyte IC50—or the concentration of rhamnolipid that induces 50% cell death. The IC50 was determined to be between 45.19 µ/mL and 65.52 µ/mL. Relating the results to rhamnolipid quantification, the concentration of rhamnolipid the construct produces should not cause significant cell death.
Keratinocyte cell viability bacteria assay
Keratinocytes were co-cultured with different strains of bacteria (Pseudomonas putida, Pseudomonas aeruginosa PAK, Staphylococcus aureus, Staphylococcus epidermidis, and mutant rhlAB P. putida). Half were cultured in plain DMEM with serum, and half were culture in DMEM with 1 mg/mL mixed mono- and di- rhamnolipids. After co-culturing, the keratinocytes were washed with PBS, exposed to gentamicin in an attempt to kill the bacteria, and incubated in MTS cell viability assay for up to 4 hours and viewed in a plate reader. MTS assay is colorimetric cell viability assay and reacts with NADPH-dependent dehydrogenase enzymes, which are only active in live (metabolically active) cells6. For the MTS assay, pure media were used as a negative control (100% cell death), and keratinocyte culture with normal DMEM was used as a positive control (“0%” cell death, or the maximum number of cells that could be alive).
We originally tried to do plating experiments to see if keratinocytes internalized any bacteria, but were unable to completely kill off all the bacteria in the keratinocyte supernatant even at extremely high gentamicin concentrations and thus could not get an accurate read.
The results indicate that there is no consistent trend regarding the addition of rhamnolipid and cell viability. Rhamnolipids did not significantly increase or decrease cell viability regardless of the bacteria type as shown in the first figure since the error bars overlap. We hypothesized that the concentration of P. putida would not influence cell viability as it is an environmental strain not nearly as potent as other bacterial strains such as Pseudomonas aeruginosa PAK. As depicted in the second figure, all MOIs (ranging from 0 to 20) did not significantly influence the cell viability of the strain as shown by the overlapping error bars in the graph. These results overall indicate that our construct may not cause significant cell death once applied to the skin in an acute setting of a few hours.
Mutant rhlAB P. putida produces rhamnolipids
Transformation of P. putida KT2440
In order to avoid the virulence factors of Pseudomonas aeruginosa, bacterial strains with similar or shared metabolic pathways to the one above were chosen as potential candidates. The final candidates were Pseudomonas putida and Staphylococcus epidermidis. Although S. epidermidis doesn’t share the same exact pathway as P. aeruginosa, it is a naturally-occurring skin microbiome and only need two additional enzymes, RhlA and RhlB, to produce mono-rhamnolipids. Genes rhlA and rhlB necessary for mono-rhamnolipid synthesis were extracted from the P. aeruginosa P14 bacterial strain. These genes were cloned into the modified plasmid pNJ3.1 using standard cloning methods for transformation into the desired bacterial strains (Figure 2). The plasmid pC194 and a shuttle vector strain, S. aureus RN4220 (details on S. epidermidis transformation are discussed in the experiments and result section) were used for S. epidermidis transformations with the same basic design (Figure 3). The conversion of mono-rhamnolipids to di-rhamnolipids requires the additional gene rhlC, which was also extracted from P14 strain and cloned into the same pNJ3.1 vector (Figure 4).
Quantification of rhamnolipids
In order to accurately measure the amount of rhamnolipids produced by our mutant strains, we used supercritical fluid chromatography (SFC-MS). First, a test run was executed with a mixture of mono-rhamnolipids and di-rhamnolipids at the concentration of 5 mg/mL by running the sample through the column packed with 2-PIC. From this test run, we have obtained the retention times of mono-rhamnolipids (rha-C10-C10: pseudomolecular ion of 503.56 m/z) and di-rhamnolipids (rha-rha-C10-C10: pseudomolecular ion of 649.8 m/z) to be approximately 3.974 min and 4.942 min respectively. Then, a calibration curve was constructed with 95% pure mono-rhamnolipids, and the limit of detection was found to be approximately 5 µ/mL. The mass fractions were obtained from electrospray ionization (ESI) negative mode.
From our TLC analysis, it was found that supplementing the LB media with glucose is crucial to the production of rhamnolipid. Therefore, for SFC-MS analysis, all the mutant strains (E. Coli_RhlAB, E. Coli_L1_RhlAB, and P. putida_L1_RhlAB) were grown in LB supplemented with glucose. From the SFC-MS data, it was found that mutant E. coli strain makes more mono-rhamnolipids than mutant P. putida. Furthermore, the promoter strength was confirmed as expected since the mutant E. coli strain transformed with a high expression level promoter H2 produced almost 6 times more rha-C10-C10.
In order to investigate the optimum growth conditions for rhamnolipid by the mutant P. putida strain, the amount of glucose added and the time of growth were varied. Using the calibration curve above, we were able to measure the accurate amount of rhamnolipids produced in each cell culture. From this data, we have concluded that P. putida produces the most mono-rhamnolipids when grown for 24 hours in the media LB supplemented with 50 g/L of glucose.
We have also tested the mutant strain of S. aureus RN4220, the strain that carries shuttle vector for S. epidermidis. Unfortunately, SFC-MS data didn't show any production of rhamnolipids from S. aureus strain.
In order to investigate the amount of di-rhamnolipids produced, we have tested our mutant strains of P. putida transformed with rhlC gene. It was grown under the same condition of 24 hours incubation in LB media supplemented by 50 g/L of glucose. Approximately 142 µ/mL of rha-C10-C10 and 3.524 µ/mL of rha-rha-C10-C10 were detected.
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12COMPATIBLE WITH RFC[12]
- 21INCOMPATIBLE WITH RFC[21]Illegal XhoI site found at 622
- 23COMPATIBLE WITH RFC[23]
- 25INCOMPATIBLE WITH RFC[25]Illegal NgoMIV site found at 205
Illegal NgoMIV site found at 393
Illegal NgoMIV site found at 931 - 1000INCOMPATIBLE WITH RFC[1000]Illegal BsaI site found at 664
Illegal BsaI.rc site found at 898
| None |