Difference between revisions of "Part:BBa K5226035"
 
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
 
<partinfo>BBa_K5226035 short</partinfo>
 
<partinfo>BBa_K5226035 short</partinfo>
−
 
+
===Sequence and Features===
 +
<partinfo>BBa_K5226035 SequenceAndFeatures</partinfo>
 +
<br>
 
===Introduction===
 
===Introduction===
−
The existing methods for large-scale production of P34HB primarily rely on microbial fermentation. A key limiting factor in this process is the molar ratio of 4HB. Increasing the 4HB molar ratio can lead to a decrease in the melting temperature and apparent fusion heat of the copolymer, as well as an improvement in the polymer's deformation resistance. Therefore, enhancing the molar ratio of 4HB is crucial for the modification of P34HB.
+
The existing methods for large-scale production of P34HB primarily rely on microbial fermentation. A key limiting factor in this process is <b>the molar ratio of 4HB</b>. Increasing the 4HB molar ratio can lead to a decrease in the melting temperature and apparent fusion heat of the copolymer, as well as an improvement in the polymer's deformation resistance. Therefore, enhancing the molar ratio of 4HB is crucial for the modification of P34HB.
  
−
Prior to embarking on this project, our laboratory had already conducted research on the production of P34HB. It was found that the expression of the 4hbd-sucD-ogdA-orfZ gene cluster could increase the molar ratio of 4HB. Following fermentation using Mmp1 inducible promoter, the porin194 constitutive promoter was considered more suitable based on the concentration gradient induction trend observed with IPTG.
+
Prior to embarking on this project, our laboratory had already conducted research on the production of P34HB. It was found that <b>the expression of the 4hbd-sucD-ogdA-orfZ gene cluster could increase the molar ratio of 4HB</b>. Following fermentation using Mmp1 inducible promoter, <b>the porin194 constitutive promoter</b> was considered more suitable based on the concentration gradient induction trend observed with IPTG.
  
−
Since two plasmids, pSEVA321 and pSEVA341, are commonly used in the laboratory, the gene cluster has only been previously expressed through the pSEVA321 plasmid.  Our intention is to introduce the porin194-4hbd-sucD-ogdA-porin194-orfZ gene cluster into TD80 to synthesize P34HB, utilizing both the pSEVA341 and pSEVA321 plasmids, which allow us to evaluate which plasmid yields better results.  
+
Since two plasmids, pSEVA321 and pSEVA341, are commonly used in the laboratory, the gene cluster has only been previously expressed through the pSEVA321 plasmid.  Our intention is to introduce the porin194-4hbd-sucD-ogdA-porin194-orfZ gene cluster into TD80 to synthesize P34HB, <b>utilizing both the pSEVA341 and pSEVA321 plasmids</b>, which allow us to <b>evaluate which plasmid yields better results</b>.  
  
 
===Usage and Biology===
 
===Usage and Biology===
−
This part is a native ribosomal binding site of 4hbD, which has not yet been characterized.  
+
This part is a <b>native ribosomal binding site of 4hbD</b>, which has not yet been characterized.  
  
−
===Sequence and Features===
 
−
<partinfo>BBa_K5226035 SequenceAndFeatures</partinfo>
 
  
  

Latest revision as of 02:51, 14 September 2024


RBS for 4hbD

Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]


Introduction

The existing methods for large-scale production of P34HB primarily rely on microbial fermentation. A key limiting factor in this process is the molar ratio of 4HB. Increasing the 4HB molar ratio can lead to a decrease in the melting temperature and apparent fusion heat of the copolymer, as well as an improvement in the polymer's deformation resistance. Therefore, enhancing the molar ratio of 4HB is crucial for the modification of P34HB.

Prior to embarking on this project, our laboratory had already conducted research on the production of P34HB. It was found that the expression of the 4hbd-sucD-ogdA-orfZ gene cluster could increase the molar ratio of 4HB. Following fermentation using Mmp1 inducible promoter, the porin194 constitutive promoter was considered more suitable based on the concentration gradient induction trend observed with IPTG.

Since two plasmids, pSEVA321 and pSEVA341, are commonly used in the laboratory, the gene cluster has only been previously expressed through the pSEVA321 plasmid. Our intention is to introduce the porin194-4hbd-sucD-ogdA-porin194-orfZ gene cluster into TD80 to synthesize P34HB, utilizing both the pSEVA341 and pSEVA321 plasmids, which allow us to evaluate which plasmid yields better results.

Usage and Biology

This part is a native ribosomal binding site of 4hbD, which has not yet been characterized.