Difference between revisions of "Part:BBa K4789009"

Line 29: Line 29:
 
               https://static.igem.wiki/teams/4789/wiki/inserts-introns.png
 
               https://static.igem.wiki/teams/4789/wiki/inserts-introns.png
 
         Fig. 4 MAP3K7-LUC IMPROVED inserts introns branch point site prediction
 
         Fig. 4 MAP3K7-LUC IMPROVED inserts introns branch point site prediction
 +
 
To introduce the desired point mutation into the MAP3K7-LUC plasmid, we initiated the process by designing a point mutation primer. Utilizing the original plasmid as a template, we performed PCR amplification. Subsequently, the amplified product was treated with the DpnI enzyme to digest the original template DNA, and the resulting product was then introduced into DH5α for transformation. After transformation, we plated the cells onto agar plates containing ampicillin to select for colonies with ampicillin resistance.(Fig 5)
 
To introduce the desired point mutation into the MAP3K7-LUC plasmid, we initiated the process by designing a point mutation primer. Utilizing the original plasmid as a template, we performed PCR amplification. Subsequently, the amplified product was treated with the DpnI enzyme to digest the original template DNA, and the resulting product was then introduced into DH5α for transformation. After transformation, we plated the cells onto agar plates containing ampicillin to select for colonies with ampicillin resistance.(Fig 5)
  
Line 36: Line 37:
 
                     https://static.igem.wiki/teams/4789/wiki/figure-6.png
 
                     https://static.igem.wiki/teams/4789/wiki/figure-6.png
 
                         Fig .6  The MAP3K7-LUC plasmids sequencing
 
                         Fig .6  The MAP3K7-LUC plasmids sequencing
 +
 
                     https://static.igem.wiki/teams/4789/wiki/figure-7.png
 
                     https://static.igem.wiki/teams/4789/wiki/figure-7.png
 
                     Fig .7  The MAP3K7-LUC IMPROVED plasmids sequencing
 
                     Fig .7  The MAP3K7-LUC IMPROVED plasmids sequencing

Revision as of 08:42, 30 September 2023


Usage and Biology

Our improved experiment is based upon the YiYe-China iGEM project from 2022(https://2022.igem.wiki/yiye-china/, https://parts.igem.org/Part:BBa_K4218004). The project aims to provide a plasmid sensor to detect intracellular alternative splicing for early diagnosis of myelodysplastic syndromes(MDS). The project had established a dual luciferase reporter system to monitor the alteration of RNA splicing in cells These reporters incorporate segments of both the intronic and exonic sequences of MAP3K7 or ZNF91 within the luciferase gene (Fig 1). The activity of luciferase can be used to measure the changes of intracellular splicing, so as to play an auxiliary role in the diagnosis of MDS.


                 luciferase-reporter.png
                    Fig .1 The dual luciferase reporter system

Results

The dual luciferase reporter system works as follow: fusion proteins (Fluc-Rluc) were expressed in cells, but when RNA splicing was disrupted, only Fluc proteins were induced. In normal cells, the expression of fusion proteins (Fluc-Rluc) was notably high. Treatment with PB (dysregulate RNA splicing) led to the downregulation of these fusion proteins. The ratio of (Rluc+ Fluc) to Rluc intensity [(Rluc+Fluc)/Rluc] was significantly decreased in cells treated with PB compared to normal cells. These findings strongly indicate that the MAP3K7-LUC and ZNF91-LUC sensors can effectively detect alterations in RNA splicing in cells. Through these results, we found that the MAP3K7-LUC plasmid exhibited higher luciferase activity after transfection, which could potentially make the system more sensitive. Consequently, we focused on evaluating the performance of the MAP3K7-LUC sensor in detecting cellular RNA splicing abnormalities. Our goal is to improve the plasmid by improving the recognition ability of inserted introns, thereby increasing the sensitivity and splicing efficiency of this MAP3K7-LUC sensor and further improving its role in MDS diagnosis.


Improved part

The Branch point site of introns play a key role in the alternative splicing of RNA. Using the https://hsf.genomnis.com/home tool, we predicted the branch point site of the MAP3K7-LUC inserted intron. The website identified two possible branch point motifs, "agctaAg" and "atctgAg." However, the "atctgAg" motif had a higher predicted value of 84.49(Fig 2). Additionally, considering the definition of the branch point site, this region is typically located approximately 30 nucleotides upstream of the 3' splice site (3' SS), and "atctgAg" is closer to the 3' SS. Therefore, we concluded that the A of "atctgAg" motif is the branch point site of the MAP3K7-LUC inserted intron.

                       inserts-introns.png
                    Fig .2 MAP3K7-LUC inserts introns branch point site prediction

According to literature reports, the sequence of intron branch point sites is highly conserved. For example, the fourth and seventh positions are mostly pyrimidines, and the second and fifth positions are mostly purine. The heptanucleotide with the highest score (TACTA*C) based on the energy motif is completely complementary to the conserved motif (GTAGTA) in the U2 snRNP, which complies with the finding that TACTAAC is the most efficient BPS for mammalian mRNA splicing(Fig 3).

                          branch-point.png
   Fig .3 BPS motifs, the larger the letter, the greater the probability. (a)BPS motifs based on high energy efficiency;(b)BPS 
                   motif inferred through database

Based on the literature reports mentioned earlier, we mutated the "G" in the seventh position of the "atctgAg" motif to "C."Subsequently, we entered the mutated intron sequence into the prediction website once more to determine the branch point site. After the improvement, we observed that the "atctgAc" motif obtained a higher predictive value of 87.21, which is higher than the value of the "atctgAg" motif (84.49) (Fig 4). We hypothesized that this improvement would enhance the splicing efficiency of the intron, thereby improving the recognition efficiency of MAP3K7-LUC receptors. We conducted the following experiment to test this hypothesis.

              inserts-introns.png
        Fig. 4 MAP3K7-LUC IMPROVED inserts introns branch point site prediction

To introduce the desired point mutation into the MAP3K7-LUC plasmid, we initiated the process by designing a point mutation primer. Utilizing the original plasmid as a template, we performed PCR amplification. Subsequently, the amplified product was treated with the DpnI enzyme to digest the original template DNA, and the resulting product was then introduced into DH5α for transformation. After transformation, we plated the cells onto agar plates containing ampicillin to select for colonies with ampicillin resistance.(Fig 5)

                                 solid-plates.png
                                Fig. 5 Solid plates of MAP3K7-LUC 

From these plates, we isolated single colonies and sequenced. These results confirmed that the ATCGAG sequence at the branch point site of the intron insertion in MAP3K7-LUC had been successfully mutated to ATCGAC(Fig 6、7). And then we proceeded to amplify it from a single colony and extracted the newly constructed MAP3K7-LUC IMPROVED plasmid. This improved plasmid was then used in subsequent cell transfection experiments.

                   figure-6.png
                       Fig .6  The MAP3K7-LUC plasmids sequencing
                   figure-7.png
                    Fig .7  The MAP3K7-LUC IMPROVED plasmids sequencing

In order to test the ability of MAP3K7-LUC and MAP3K7-LUC IMPROVED to detect dysregulation of RNA splicing, Pladienolide B (PB, an RNA splicing inhibitor) was used. The plasmids MAP3K7-LUC and MAP3K7-LUC IMPROVED were transfected into 293T cells, respectively. PB (final concentration: 1 ng/μl) was added to disturb the process of RNA splicing. According to the principle of our plasmid sensors, the fusion proteins (Fluc-Rluc) were expressed in 293T cells. We observed noticeable differences in the cell culture medium as well. The medium with PB exhibited slower consumption and a redder color, while the medium without PB remained more yellow (Fig 8). This observation aligns with the principles of our plasmid sensors. After transfection, we lysed the cells and measured luciferase expression using a plate reader (SpectraMax i3).

                 figure-8.png
                        Fig .8 Cells in 24-well plates.
     The left is the cells before transfection and the right is the cells transfected with plasmids for 48 h.


In normal cells, the expression of the fusion proteins (Fluc-Rluc) was high. Treatment with PB downregulated the expression of fusion proteins. Specifically, the ratio of (Rluc+ Fluc) to Rluc intensity [(Rluc+Fluc)/Rluc] was significantly reduced in cells treated with PB compared to normal cells. Notably, regardless of the presence of PB, the luciferase activity of the MAP3K7-LUC IMPROVED plasmid was consistently higher than that of MAP3K7-LUC. These results demonstrate that the plasmid sensor MAP3K7-LUC IMPROVED can effectively detect intracellular RNA alternative splicing (Table 1). Furthermore, our improvements have enhanced the splicing efficiency of the introns in the plasmid sensor, resulting in a dual luciferase reporter system with increased detection efficiency and sensitivity(Fig 9).

        Table 1. The value of fluorescence in cell transfected MAP3K7-LUC or MAP3K7-LUC IMPROVED with or without PB treatment

                  9-table.png
                   10.png
         Fig.9  The relative luciferase activity in cells transfected with MAP3K7-LUC or MAP3K7 IMPROVED 
                   and with or without PB treatment. 


Conclusion

In conclusion, the ability of MAP3K7-LUC IMPROVED plasmid to detect dysregultion is more efficient than that of previous plasmid, which may provide the stronger power to dignosis MDS.


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    COMPATIBLE WITH RFC[21]
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal AgeI site found at 2459
  • 1000
    INCOMPATIBLE WITH RFC[1000]
    Illegal SapI.rc site found at 3661