Difference between revisions of "Part:BBa K3739081"

Latest revision as of 01:55, 22 October 2021

his-CBM-hutH

Histidine ammonia-lyase with a his-tag is involved in catalyzing the reaction of  changing L-histidine into trans-urocanate, CBM can anchor onto cellulose.

Usage and Biology

Characterization

In order to eliminate threat from Phaeocystis globosa to the nuclear power plant cooling system, we design a genetic circuit which could express protein aim at this alga. The cellulose binding module (CBM) and (histidine ammonia-lyase) HutH from Pseudomonas Putida were fused to protein CBM-HutH. The fusion protein could bind to the cellulose on the surface of P. globosa and catalyzes L-histidine, secreted by P. globosa to trans-urocanate. which then elevates the ROS around the P. globosa to damage the algal cells.
Promoter (BBa_K525998), RBS (BBa_B0030), his-CBM-HutH gene (BBa_K3739071), and terminator (BBa_B0010) were assembled into pET-28a(+) plasmid backbone to express the his-CBM-HutH. The constructed plasmid was transformed into Vibrio natriegens through electroporation. Positive colonies were selected by kanamycin preliminarily and then verified by colony PCR (Fig. 1) and sequencing.

Fig. 1. The result of colony PCR. Plasmid pET-28a (+).
Then, the colony with the corrected sequence was cultivated to express HutH target protein. After ultrasonication broke and centrifugation, GE AKTA Prime Plus FPLC System was employed to purify the CBM from the supernatant. Purified protein was verified by electrophoresed on a sodium dodecyl sulfate (SDS)-10% (wt/vol) polyacrylamide gel, followed by Coomassie blue staining (Fig. 2). Because CBM own the ability of plastic binding activity, tube and beaker used after ultrasonication are made from glass or Teflon.

Fig. 2. SDS-PAGE analysis of protein his-CBM-HutH. Target bands can be seen at about 69 kDa.
The absorbance of trans-urocanate was measured at 277 nm to obtain the data of concentration. Same concentration and volume of HutH and CBM-HutH solutions were added to the L-histidine solution, and the value OD₂₇₇ was monitored and recorded. As shown in Fig. 3, the OD₂₇₇ in two group was rising continuously, suggesting that CBM-HutH has the ability to catalyzes L-histidine to trans-urocanate.

Fig. 3. Time course of the value of OD₂₇₇.

Characterization of signal peptides

Since some proteins in our project are intended to function in extracellular environment, how to get out of the cells is vital for realization of their functions. Signal peptide is a short amino acid sequence on secreted protein, which is a natural helper of protein to get out of cytoplasm. However, signal peptides can lead protein go to not only the extracellular environment but also the periplasm and membrane. There are several signal peptides selected for V.natriegens, but these are all directed into periplasm. 1 Although there is a signal peptide of alginate lyase from V.natriegens able to direct heterogenous protein to extracellular environment in E.coli chasis, It is not clear that there is a signal peptide conducting protein to extracellular environment in V.natriegens. 2

Selected procedure

Here, we use a tip to select the signal peptide. Download the translated CDS information of V.natriegens from NCBI Assembly. Through analysis of SignalP 5.0, we found out several candidate signal peptides which have significant likelihood to work with corresponding secretion system. According to the function of proteins containing proposed signal peptide, we can exclude the signal peptides targeting to the periplasm and cell membrane. Finally, we find out the best candidate signal peptide, LMT signal peptide, from our chassis

Qualification results

To clarify whether the signal peptides we selected are able to direct the fused proteins to extracellular environment, we constructed Aly01 and LMT single peptides with BBa_K2560063 which is from 2018 Marhurg iGEM program and transformed the pET28a(+) plasmid with composite parts BBa_K3739038 and BBa_K3739041 into V.natriegens. Then we use the anti-GFP antibody to detect secreted GFP in the filtered supernatant of V.natriegens liquid culture by western blotting after V.natriegens is cultivated for .16 hours. The concentration of his-GFP in the supernatant of BBa_K3739041 is significantly higher than that in J23100-B0030-GFP. (Fig. 1A, 1B) Furthermore, less expression of BBa_K3739041 than that of GFP conforms that LMT-his-GFP is secreted rather than from lysed cells. (Fig. 1C) However, the concentration of Aly01-his-GFP is less than that of GFP. (Fig. 1A, 1B) It is probably because that there are less expression of Aly01-his-GFP in V.natriegens. (Fig. 1C) Thus, we use another method to prove our hypothesis.

Fig. 1. (A) Western Blotting detection of the V.natriegens supernatants of J23100-B0030-GFP, BBa_K3739038 and BBa_K3739041 after 16h cultivation in LBv2 liquid culture, 37℃. Sup. means supernatant. (B) Grayscale analysis of (A). (C) Fluorescence intensity/OD600 value of V.natriegens strain of J23100-B0030-GFP, BBa_K3739038 and BBa_K3739041 in LBv2 liquid culture after 16h cultivation in 37℃.

Quantitation results

In order to exclude the difference of expression among J23100-B0030-GFP, BBa_K3739038 and BBa_K3739041 and quantify secretion effect of signal peptide, we treated V.natriegens liquid cultures after 12.5 h cultivation in 37℃ with 12.5 μg/mL chloramphenicol. Then we sampled the cultures every 6 minutes and terminated secretion with 20 mM NaN3. As time goes, the his-GFP concentration of culture supernatant were increased in both BBa_K3739038 and BBa_K3739041. This is indicated that both LMT and Aly01 signal peptide are able to translocate fused protein to extracellular environment. (Fig. 2A, 2B) We made a grayscale analysis for the modelling of secretion, and the total GFP is detected for confirmation that the translation is completely repressed. (See our Model https://2021.igem.org/Team:XMU-China/Model pages)

Fig. 2. (A) Western blotting detection of sampled supernatants treated with chloramphenicol in different times. (B) GFP concentration of treated supernatant of BBa_K3739038 and BBa_K3739041 in (A)

Secretion in E.coli

Besides conducting protein secretion in V.natriegens, Aly01 signal peptide is reported that it is able to conduct protein secretion in E.coli as well. 2We supposed that LMT signal peptide may also have conducting function in E.coli. Thus, we used filtered culture of BL21 strain transformed with pET28a(+)-BBa_K3739043 and pET28a(+)-BBa_K3739041 for SDS-PAGE. Then the SDS-PAGE gel is stained by silver staining. Contrasting to BBa_K3739043, his-GFP is detected in the supernatant of pET28a(+)-BBa_K3739041.(Fig. 3) It is indicated that LMT signal peptide can also work for conducting ====secretion in E.coli====

Fig. 3. Silver staining result of supernatant of BL21(DE3) transformed with BBa_K3739043 and BBa_K3739041, respectively. Then we used an alternative way to verify the secretion function of signal peptides in E.coIi. The proteins labeled of tetracysteine motif tag (FlAsH tag, FT in short) could be detected with the biarsenical compound FlAsH-EDT2. 3 To quantify and qualify the secretion effect, FT was added into the C-terminal of BBa_K3739000, BBa_K3739006 and BBa_K3739009. Composite parts BBa_K3739084, BBa_K3739085, BBa_K3739087 were constructed (Fig. 4) on plasmid backbone pSB1C3 or pET-28a(+) and then the recombinant plasmid was transformed into E. coli BL21 (DE3). Positive colonies selected by colony PCR and sequencing were cultivated for secretion analysis.

Fig. 4. Colony PCR results of BBa_K3739084, BBa_K3739085, BBa_K3739087 After cultivation for 5 hours at 37℃ and induction for 2 hours with 0.1 mM IPTG, the cell supernatant was separated by centrifugation. The supernatant along with 2 μM FlAsH-EDT2 and 1 mM DTT were added to wells in a 96-well plate. Following incubation in the dark for 1 h at 37 °C, fluorescence was measured by 503 nm excitation and 528 nm emission, and each value was normalized by OD600. The result shows that the fluorescence intensity/OD600 of the group Aly01 and LMT is significantly higher than native control group, which proves that these 2 signal peptides can function well. (Fig. 5)

Fig. 5. Fluorescence intensity/OD600 of cell supernatant after incubation in the dark for 1h. Moreover, to promote our understanding on secretion process mediated by signal peptides, we built a model about relationship between the amount of secreted recombinant protein and time. (See our Model https://2021.igem.org/Team:XMU-China/Model pages) In order to get the value of P_T (the total amount of recombinant protein per unit volume of reactor), P_M (the amount of the recombinant protein in the medium compartment in unit volume) and γ(extracellular secretion rate constant), a sets of characterization experiments were done. BBa_K3739087 were constructed on plasmid backbone pET-28a(+) and then the recombinant plasmid was transformed into E. coli BL21 (DE3). After cultivation for 5 hours and induction for 3 hours with 0.1 mM IPTG, 50mg/L chloroamphenicol was added to bog down the synthesis of protein in the engineered bacteria in order to make the experimental operations more convenient. Then, the cell supernatant was collected in 0, 6, 12, 18, 24, 30, 40 min to test the amount of secreted recombinant protein by fluorescence detection of FlAsH-EDT2 and FT. (Fig. 6)

The data shows that after the protein synthesis was inhibited, the change in the amount of secreted protein over time was well matched with the model.

Sequence and Features