Difference between revisions of "Part:BBa K2448032"

Line 33: Line 33:
 
To estimate this duration, we looked at the raw data and observed that it took around 9 hours to get an observable signal for the lowest concentration of inducer. It means that sensitivity threshold and consequently maximum accuracy is reached 9 hours after induction.  
 
To estimate this duration, we looked at the raw data and observed that it took around 9 hours to get an observable signal for the lowest concentration of inducer. It means that sensitivity threshold and consequently maximum accuracy is reached 9 hours after induction.  
  
Since we wanted to detect and measure D-Psicose concentration between 1 mM and 300 mM, we needed a biosensor able to get maximum accuracy for this range of concentration in a minimal time. Taking into account the raw data, we can estimate that for this biosensor if D-Psicose concentration is above 10 mM, a 5 hour incubation after induction would give relevant results.  
+
Since we wanted to detect and measure D-Fructose concentration between 1 mM and 300 mM, we needed a biosensor able to get maximum accuracy for this range of concentration in a minimal time. Taking into account the raw data, we can estimate that for this biosensor if D-Fructose concentration is above 10 mM, a 5 hour incubation after induction would give relevant results.  
  
 
=====Basal expression=====
 
=====Basal expression=====
Line 45: Line 45:
 
This gives us two important pieces of information:
 
This gives us two important pieces of information:
 
*First, the results show that FruR interact with fructose The same observation applies for the pFruB promoter which seems tightly regulated by FruR under fructose induction.  
 
*First, the results show that FruR interact with fructose The same observation applies for the pFruB promoter which seems tightly regulated by FruR under fructose induction.  
*Second, the dynamic range of this biosensor appears to go from 1 mM to 300 mM psicose. This means that we will be able to use it in real applications for our bioscreening protocol to assess the production of psicose that could range from 1 mM to maximum 300 mM.
+
*Second, the dynamic range of this biosensor appears to go from 1 mM to 300 mM fructose. This means that we will be able to use it in real applications for our bioscreening protocol to assess the production of fructose that could range from 1 mM to maximum 300 mM.
  
 
[[File:T--Evry_Paris-Saclay--pFruB-FruR-Ec.png|300px]]
 
[[File:T--Evry_Paris-Saclay--pFruB-FruR-Ec.png|300px]]

Revision as of 21:54, 1 November 2017


Fructose Biosensor pFruB-FruR from Escherichia coli

Fructose Biosensor pFruB-Ec FruR-Ec This part is a Fructose Biosensor based on the FruR transcription factor from Escherichia coli (BBa_K2448009) and its associated promoter pFruB (BBa_K2448017).

Usage and Biology

Biosensors rely on a basic theoretical principle: a certain concentration of a molecule of interest induces the proportional production of an easily detectable output, like fluorescence. Transcription-factor based biosensors allow quick and cheap detection or quantification of various chemical compounds.

Features

This biosensor was built using the Universal Biosensing Chassis (BBa_K2448023, BBa_K2448024) which is a composite part that provides an answer to the lack of rapid and reliable building methods for transcription-factor based biosensors.

It is based on the FruR transcription factor from Escherichia coli (BBa_K2448009) and its associated promoter pFruB (BBa_K2448017).

FruR from 'Escherichia coli (BBa_K2448009) is a LacI family transcription factor with affinity for D-Fructose. FruR is capable of binding a consensus sequence in the promoter region and preventing transcription of the regulated promoters in the absence of D-Fructose, in a similar manner to the way LacI does in the absence of allolactose (or the synthetic IPTG).

In this biosensor, we used this Helix-Turn-Helix transcription factor together with the Escherichia coli pFruB (BBa_K2448017) which is the promoter region (0.25 kb upstream) of the FruB gene of Escherichia coli K-12 (ECK2162). pFruB is repressed by the FruR transcription factor (BBa_K2448009) which is inhibited in the presence of D-Fructose. This promoter regulates the expression of mCherry in our biosensor.

The results presented hereafter show that this duo FruR - pFruB behaved as predicted under and without induction.

Principle

When pTacI is induced by IPTG, it drives the transcription of the FruR gene coding for the FruR protein which is a transcription factor able to bind D-Fructose. If D-Fructose is present in the cell, the transcription factor will bind preferentially to it and thus be inactivated. The repression of the related promoter pFruB will be released, enabling the transcription of a fluorescent protein, mCherry. If D-Fructose isn’t present in the cell, FruR will bind to pFruB, preventing any transcription of mCherry.

Characterization

The detailed protocol is presented in the Experience page.

Optimal measurement time

The characterization of the biosensors allowed us to determine many important parameters. For instance, running the experiment for a long period (18 hours) got us an estimation of the optimal measurement time.

To estimate this duration, we looked at the raw data and observed that it took around 9 hours to get an observable signal for the lowest concentration of inducer. It means that sensitivity threshold and consequently maximum accuracy is reached 9 hours after induction.

Since we wanted to detect and measure D-Fructose concentration between 1 mM and 300 mM, we needed a biosensor able to get maximum accuracy for this range of concentration in a minimal time. Taking into account the raw data, we can estimate that for this biosensor if D-Fructose concentration is above 10 mM, a 5 hour incubation after induction would give relevant results.

Basal expression

The biosensor show a basal expression of 400 arbitrary units of fluorescence at 18 hour post-induction. This basal activity even without fructose in the media is due to an imbalance between the amount of FruR transcription factor available and the pFruB promoter strength. Even when FruR is produced, the transcription factor can’t totally prevent the transcription from happening.

Dynamic range

Determining the dynamic range of our biosensor will give us an estimate of its sensitivity, its maximum and its potential use. We can observe in figure 2 a perfect foldchange and perfect linearity in range of concentrations from 1 mM to 300 mM.

This gives us two important pieces of information:

  • First, the results show that FruR interact with fructose The same observation applies for the pFruB promoter which seems tightly regulated by FruR under fructose induction.
  • Second, the dynamic range of this biosensor appears to go from 1 mM to 300 mM fructose. This means that we will be able to use it in real applications for our bioscreening protocol to assess the production of fructose that could range from 1 mM to maximum 300 mM.
Error creating thumbnail: Invalid thumbnail parameters

Figure 2. In vivo characterization of this Fructose Biosensor in E. coli TOP10. The graph shows the mCherry measured florescence over fructose concentration in the media. Each data point is the mean of two technical duplicates and of three biological triplicates. Error bars represent standard deviations.

Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal BamHI site found at 1262
    Illegal XhoI site found at 62
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal AgeI site found at 2129
    Illegal AgeI site found at 2241
  • 1000
    COMPATIBLE WITH RFC[1000]