Difference between revisions of "Part:BBa K4275012"

Revision as of 13:05, 12 October 2022 (view source) Jerryatcg (Talk | contribs) (→‎Characterisation of the Cellulosome Complex) ← Older edit		Revision as of 13:34, 12 October 2022 (view source) Jerryatcg (Talk | contribs) (→‎Characterisation of the Cellulosome Complex) Newer edit →
Line 15:		Line 15:
	==Characterisation of the Cellulosome Complex==		==Characterisation of the Cellulosome Complex==
		+
	<h3>Mini-scaffold construction of cellulosome</h3>		<h3>Mini-scaffold construction of cellulosome</h3>
Line 20:		Line 21:
	We constructed E.coli expression vectors for the mini-scaffold protein subunits. The scaffoldin components of the wild-type cellulosome subunits are large protein scaffolds that would bring a massive protein burden to the bacterial host secreting them. We modified the coding sequences for the wild-type cellulosome protein scaffold, as shown in (Fig.3A and Fig.3B)		We constructed E.coli expression vectors for the mini-scaffold protein subunits. The scaffoldin components of the wild-type cellulosome subunits are large protein scaffolds that would bring a massive protein burden to the bacterial host secreting them. We modified the coding sequences for the wild-type cellulosome protein scaffold, as shown in (Fig.3A and Fig.3B)
	The mini-scaffolds were successfully expressed by our host, verified by the SDS-PAGE analysis shown in (Fig.3C and Fig.3D)		The mini-scaffolds were successfully expressed by our host, verified by the SDS-PAGE analysis shown in (Fig.3C and Fig.3D)
		+
	[[Image:GreatBay SCIE--Part Fig4.png|950px|center|'''Figure 2:''' ]]		[[Image:GreatBay SCIE--Part Fig4.png|950px|center|'''Figure 2:''' ]]
−	<p><h3>Figure.2</h3> Mini-scaffold expression in E. coli BL21. (A) Construction of primary scaffold CipA1B2C (i.e., 1 CBM3 and 2 type I cohesin) (B) Construction of anchorage scaffold OlpB-Ag3 (i.e., 3 type II cohesin). (C) SDS-page analysis for CipA1B2C. (D) SDS-page analysis for OlpB-Ag3. </p>	+	<p><h3>Figure 2</h3> Mini-scaffold expression in E. coli BL21. (A) Construction of primary scaffold CipA1B2C (i.e., 1 CBM3 and 2 type I cohesin) (B) Construction of anchorage scaffold OlpB-Ag3 (i.e., 3 type II cohesin). (C) SDS-page analysis for CipA1B2C. (D) SDS-page analysis for OlpB-Ag3. </p>
		+
		+
		+
		+
		+	<h3>Functionality testing of our mini-scaffold</h3>
		+
		+	In order to verify the three levels of protein-protein interaction that assembles our cellulosome complex, Ag3-eforRED, DocI-eforRED, and DocII-eforRED vectors were constructed and cultured for IPTG-inducible expression (Fig. 3D). SDS-page analysis was performed with lysed cells and all three targeted proteins were identified in both whole cell and supernatant (Fig. 4A and 4B).
		+
		+	The nanobody-antigen interaction was verified by mixing intact E. coli cells displaying Neae-Nb3 with the supernatant of Ag3-eforRED (Fig. 3A). Red fluorescent characteristics were observed in the pellets after resuspending the centrifuged mixture, which is absent in the control group that only contains Neae-Nb3 (Fig. 4C).
		+
		+	After that, the type II cohesin-dockerin interaction was tested using the mixture of Neae-Nb3, OlpB-Ag3, and the type II dokerin fused with eforRED (Fig. 3B). A negative control lacking OlpB-Ag3 was set up for result comparison. Centrifugation was used to remove supernatant and the red fluorescence was only identified in pellets of the sample group, confirming the type II cohesin-dockerin interaction (Fig. 4D).
		+
		+	Finally, the association between type I cohesin and type I dockerin was validated using the mixture of Neae-Nb3, OlpB-Ag3, CipA1B2C, and DocI-eforRED (Fig. 3C), red fluorescence was detected in the resuspended mixture while it was not observed in the control group lacking the primary scaffold CipA1B2C (Fig. 4E), verifying the type I cohesin-dockerin interaction.
		+
		+
		+
		+	[[Image:GreatBay SCIE--Part Fig5.png|950px|center|'''Figure 3:''' ]]
		+	<p><h3>Figure 3</h3> Cellulosomal scaffold system construct (A) Antigen-nanobody interaction between Nb3 and Ag3 domain reported by the ligated eforRed fluorescent domain (B) Type II cohesin -dockerin interaction between a fixed secondary scaffoldin component and a type II dockerin domain reported by the ligated eforRed fluorescent domain (C) Type I cohesin-dockerin interaction between a fixed primary scaffoldin component and a type I dockerin domain reported by a ligated eforRed fluorescent domain (D) Genetic circuit designed for the expression of ligated form of Ag3, type I dockerin and type II dockerin domains fused with an eforRed fluorescent domain at N terminus for reporting the adhesive functions of those domains.</p>
		+
		+
		+
		+	[[Image:GreatBay SCIE--Part Fig6.png|950px|center|'''Figure 4:''' ]]
		+	<p><h3>Figure 4</h3> Production and assay of the scaffold proteins (A) SDS-PAGE analysis for the presence of type I dockerin-eforRed (B) SDS-PAGE analysis of Ag3-eforRed and type II dockerin -eforRed containing type II dockerin fused with an eforRed domain (C) The fluorescence indication for antigen-nanobody interaction for E. Coli surface display with an Ag3 control group and a sample group (D) The fluorescence indication for type II cohesin-dockerin interactions with a type II dockerin control group and a sample group (E ) The fluorescence indication for type I cohesin-dockerin interactions with a type I dockerin control group and a sample group. </p>
		+
		+
		+
		+
		+	<h3>Cellulosome construction</h3>
		+
		+	We assembled the cellulose-like complex on the surface of E.coli by adding primary scaffold proteins, cellulases and cellulase boosters onto E.coli expressing secondary scaffold proteins. The mixture was centrifuged and resuspended in tris-HCl. The mixture underwent centrifugation and resuspension using tris-HCl, and cellulose was added to the mixture.
		+
		+	After 24h, the mixture was filtered and tested for glucose by Benedict's test. From the result, we determined that the cellulosome-like complexes are able to degrade cellulose at a higher efficiency than cell-free cellulases mixture.
		+	The overall success in engineering our project was verified by the successful construction of cellulosome complex and degrading cellulose to reducing sugars.
		+
−	In order to verify the three levels of protein-protein interaction that assembles our cellulosome complex, Ag3-eforRED, DocI-eforRED, and DocII-eforRED vectors were constructed and cultured for IPTG-inducible expression (Fig. 4D). SDS-page analysis was performed with lysed cells and all three targeted proteins were identified in both whole cell and supernatant (Fig. 5A and 5B).	+	[[Image:GreatBay SCIE--Part Fig9.png|950px|center|'''Figure 5:''' ]]
		+	<p><h3>Figure 5</h3> The Benedict’s quantitative and qualitative tests for reducing sugar produced by the enzymatic or cellulosomal degradation of cellulose (A) Benedict’s qualitative test result for reducing sugar production through 24h of cellulose degradation by cellulosome, cellulosome without boosters, nanobody presenting cell+free cellulases+cellulase boosters, nanobody presenting cell+cellulases and nanobody presenting cell control from left to right (B) Benedict’s quantitative test for absorbance of the samples obtained from the Benedict’s qualitative test at 635 nm wavelength. </p>
	==Sequence and Features==		==Sequence and Features==

---

Revision as of 13:34, 12 October 2022

CipA1B2C

CipA1B2C, a cellulosome integrating protein A with one integral carbohydrate-binding module 3 (CBM3), two type I cohesins, and a type II dockerin, is the primary scaffoldin of a cellulosome complex. The CBM3 binds to a range of polysaccharides, including cellulose and PET, increasing the catalytic efficiency of the enzymes. Meanwhile, the type I cohesins interact with the type I dockerins of cellulosomal enzymes, enabling the enzymes to attach to CipA1B2C. CipA1B2C forms a complete cellulosome complex when it binds to outer layer protein B (OlpB), an anchoring protein attached to a cell surface[1]. CipA1B2C improves the efficiency of cellulosomal enzymes by increasing binding affinity to cellulose and PET through CBM and facilitating the spatial proximity among various enzymes, which allows enzymes to work in synergy. The ability to bind to various cellulosomal enzymes makes CipA a versatile tool for enhancing the efficiency of enzymes and conducting different enzyme synergies, which means CipA can promote the degradation rate of diverse materials (i.e. PET and cellulose)[1]. This is a part in a part collection where we enable efficient degradation of cellulose and PET in textile waste.

Figure 1 The 3D structure of the protein predicted by Alphafold2.

Usage and Biology

CipA1B2C is a scaffold protein with one carbohydrate-binding module 3 (CBM3) and two type I cohesins. Natural CipA is found in Clostridium thermocellum, a gram-positive thermophilic and anaerobic bacterium. Cellulosomal enzymes bind tightly to CipA1B2C via the high-affinity dockerin I: cohesin I noncovalent interaction. CipA1B2C is then attached to OlpB, the secondary scaffoldin of the cellulosome complex, through the interaction between the type II dockerin and type II cohesin. OlpB is anchored to the cell surface. The CipA1B2C, OlpB, and the cellulosomal enzymes together comprise a multiplex cellulosome. Utilizing the highly effective cellulosome complex, C.thermocellum is the most efficient microorganism for lignocellulosic biomass degradation.

Characterisation of the Cellulosome Complex

Mini-scaffold construction of cellulosome

We constructed E.coli expression vectors for the mini-scaffold protein subunits. The scaffoldin components of the wild-type cellulosome subunits are large protein scaffolds that would bring a massive protein burden to the bacterial host secreting them. We modified the coding sequences for the wild-type cellulosome protein scaffold, as shown in (Fig.3A and Fig.3B) The mini-scaffolds were successfully expressed by our host, verified by the SDS-PAGE analysis shown in (Fig.3C and Fig.3D)

Figure 2

Mini-scaffold expression in E. coli BL21. (A) Construction of primary scaffold CipA1B2C (i.e., 1 CBM3 and 2 type I cohesin) (B) Construction of anchorage scaffold OlpB-Ag3 (i.e., 3 type II cohesin). (C) SDS-page analysis for CipA1B2C. (D) SDS-page analysis for OlpB-Ag3.

Functionality testing of our mini-scaffold

In order to verify the three levels of protein-protein interaction that assembles our cellulosome complex, Ag3-eforRED, DocI-eforRED, and DocII-eforRED vectors were constructed and cultured for IPTG-inducible expression (Fig. 3D). SDS-page analysis was performed with lysed cells and all three targeted proteins were identified in both whole cell and supernatant (Fig. 4A and 4B).

The nanobody-antigen interaction was verified by mixing intact E. coli cells displaying Neae-Nb3 with the supernatant of Ag3-eforRED (Fig. 3A). Red fluorescent characteristics were observed in the pellets after resuspending the centrifuged mixture, which is absent in the control group that only contains Neae-Nb3 (Fig. 4C).

After that, the type II cohesin-dockerin interaction was tested using the mixture of Neae-Nb3, OlpB-Ag3, and the type II dokerin fused with eforRED (Fig. 3B). A negative control lacking OlpB-Ag3 was set up for result comparison. Centrifugation was used to remove supernatant and the red fluorescence was only identified in pellets of the sample group, confirming the type II cohesin-dockerin interaction (Fig. 4D).

Finally, the association between type I cohesin and type I dockerin was validated using the mixture of Neae-Nb3, OlpB-Ag3, CipA1B2C, and DocI-eforRED (Fig. 3C), red fluorescence was detected in the resuspended mixture while it was not observed in the control group lacking the primary scaffold CipA1B2C (Fig. 4E), verifying the type I cohesin-dockerin interaction.

Figure 3

Cellulosomal scaffold system construct (A) Antigen-nanobody interaction between Nb3 and Ag3 domain reported by the ligated eforRed fluorescent domain (B) Type II cohesin -dockerin interaction between a fixed secondary scaffoldin component and a type II dockerin domain reported by the ligated eforRed fluorescent domain (C) Type I cohesin-dockerin interaction between a fixed primary scaffoldin component and a type I dockerin domain reported by a ligated eforRed fluorescent domain (D) Genetic circuit designed for the expression of ligated form of Ag3, type I dockerin and type II dockerin domains fused with an eforRed fluorescent domain at N terminus for reporting the adhesive functions of those domains.

Figure 4

Production and assay of the scaffold proteins (A) SDS-PAGE analysis for the presence of type I dockerin-eforRed (B) SDS-PAGE analysis of Ag3-eforRed and type II dockerin -eforRed containing type II dockerin fused with an eforRed domain (C) The fluorescence indication for antigen-nanobody interaction for E. Coli surface display with an Ag3 control group and a sample group (D) The fluorescence indication for type II cohesin-dockerin interactions with a type II dockerin control group and a sample group (E ) The fluorescence indication for type I cohesin-dockerin interactions with a type I dockerin control group and a sample group.

Cellulosome construction

We assembled the cellulose-like complex on the surface of E.coli by adding primary scaffold proteins, cellulases and cellulase boosters onto E.coli expressing secondary scaffold proteins. The mixture was centrifuged and resuspended in tris-HCl. The mixture underwent centrifugation and resuspension using tris-HCl, and cellulose was added to the mixture.

After 24h, the mixture was filtered and tested for glucose by Benedict's test. From the result, we determined that the cellulosome-like complexes are able to degrade cellulose at a higher efficiency than cell-free cellulases mixture. The overall success in engineering our project was verified by the successful construction of cellulosome complex and degrading cellulose to reducing sugars.

Figure 5

The Benedict’s quantitative and qualitative tests for reducing sugar produced by the enzymatic or cellulosomal degradation of cellulose (A) Benedict’s qualitative test result for reducing sugar production through 24h of cellulose degradation by cellulosome, cellulosome without boosters, nanobody presenting cell+free cellulases+cellulase boosters, nanobody presenting cell+cellulases and nanobody presenting cell control from left to right (B) Benedict’s quantitative test for absorbance of the samples obtained from the Benedict’s qualitative test at 635 nm wavelength.

Sequence and Features

References

1. Anandharaj, Marimuthu et al. "Constructing A Yeast To Express The Largest Cellulosome Complex On The Cell Surface". Proceedings Of The National Academy Of Sciences, vol 117, no. 5, 2020, pp. 2385-2394. Proceedings Of The National Academy Of Sciences, https://doi.org/10.1073/pnas.1916529117.