Difference between revisions of "Part:BBa K2668010"

Revision as of 14:10, 13 October 2018

Cerberus : A Molecular Binding Plateform (mSA2-CBM3a-AzF) Sequence and Features

Introduction

The Cerberus part (BBa_K2668010) is composed by the CBM3a (corrected version of the Part:BBa_K1321014) fused at the N-terminus to the biotinylated molecule-binding head (monomeric streptavidin, Part:BBa_K1896000) and at the C-terminus to the unnatural amino acid azido-L-phenylalanine (AzF). The incorporation of AzF is achieved through the recognition of the amber stop codon at the C-terminus of CBM3a by an orthogonal AzF-charged tRNA.

Coupling of molecules to the AzF head can be performed by click chemistry, either SPAAC or Cu(I)-catalyzed azide-alkyne click chemistry (CuAAC). To prove the versatility of the system, different compounds such as fluorescent proteins or paramagnetic beads have been clicked on Cerberus.

Construction

The Cerberus part (BBa_K2668010) consists in a CBM3 domain fused with mSA2, an engineered version of Streptavidin and Rhizavidin, on his N terminus endogenous linker and containing a UAG codon on his C terminus linker for amber suppression by an unnatural amino acid incorporation. The Streptavidin and N-terminus linker are separated by a TEV cleavage site to accesorily release the bound compound. IDT performed the DNA synthesis and delivered the part as gBlock. The construct was cloned woth an In-Fusion kit into the pSB1C3 plasmid and then transformed into E. coli Dh5-alpha strain. Figure 1 shows the restriction map of the resulting clones. We expected two bands at 2.4Kb and 0.7Kb Only clones 2 and 5 show the expected restriction profiles. The clones 5 was deposited in the registry of Standard Biological Parts.

Figure 1: Analyses of pSB1C3_ CBM3- monomeric streptavidin – AzF length and restriction map The plasmids of 5 obtained clones were analysed to check their length. XbaI/NcoI digested plasmids (clones 1 to 5) are electrophoresed through a 1% agarose gel. Lane 1 is the Smart DNA ladder (Eurogentec), the 0.4kb, 1.5 kb and 3kb DNA fragments are annotated. Lane 2 to 6 are the digested plasmids resulting from DNA extraction of the 5 clones.

Molecular Modeling

Modelling this three-headed fusion protein presented a complex challenge, requiring a multi-step and multi-level strategy relying on various molecular modelling and simulation methods. We used available X-ray structure data from the Protein Data Bank, integrated 3D structure prediction tools, employed innovative robotics inspired artificial intelligence methods to explore the intrinsically disordered regions, built and parametrised the unnatural amino acid aziodphenyalanine, and finally studied its behaviour over time through molecular dynamics simulations in a large explicit solvent water box. The results of the molecular dynamics simulation comforted us in the stability of our construction as the domains kept their structure over 90ns of simulation as showed in figure 2.

Figure 2: Molecular Dynamics simulation of Cerberus in a water box (not showed) for 90ns In Red streptavidin, in orange the TEV Cleavage site, in yellow the endogenous N-terminus linker in green the CBM3a in light blue the endogenous C-terminus linker. In magenta the biotin and in blue the FITC clicked on the AzF.

Characetrisation

Production of Cerberus

The fusion between the streptavidin linker and CBM3a platform sequences followed by the amber stop codon was cloned into the pET28 (containing an His Tag) expression vector using In-Fusion Cloning Kit. pET28 was digested by NcoI and HindIII and part were amplified using primer pair stated below. The resulting construct was co-transformed with pEVOL-AzF expression vector (coding for amino acyl tRNA synthetase (aarS)/tRNA orthogonal pair for in vivo incorporation in E. coli under L-arabinose induction) into E. coli strain BL21. pEVOL-pAzF was a gift from Peter Schultz (Addgene plasmid # 31186). Expression of the recombinant protein was induced using IPTG and L-arabinose, with addition of AzF in the medium as follow. The synthesis of aaRS/tRNA pair was first induced with L-arabinose and AzF was added at the same time and one hour later, the production of Cerberus with IPTG. The His-tagged protein was then purified on IMAC resin (Sigma) charged with cobalt. Results are shown on figure 3.

Primer used: (from 5' to 3')

• Cerberus Forward : TAAGAAGGAGATATACCATGGCGGAAGCGGGTATCACC
• Cerberus Reverse : CTCGAGTGCGGCCGCAAGCTTCGGATCGTCCTATGATGGAGG

Figure 3: SDS-PAGE analysis of the production of Cerberus NI: non-induced, I-AzF: induced without AzF, I+AzF: induced with AzF, E1: elution with 40 mM imidazole, E2: elution with 100 mM imidazole, E3: elution with 100 mM imidazole, MW: molecular weight ladder

Induction in the presence of AzF ( lane I+AzF) led to the expression of two major bands at 37 and 39 kDa approximately compared to control conditions, namely the non-induced (lane NI) and induced without AzF (lane I-AzF). We hypothesized that the upper and the lower band would correspond to Cerberus (expected molecular weight of monomeric Cerberus: 41 kDa), and a version Cerberus lacking AzF and therefore His Tag (39kDa expected, 37kDa Observed) respectively. Surprisingly, both bands were still present in the elution fractions which is incoherent since Orthos lacks an His-tag and was supposed to be washed out during purification steps. To confirm our hypothesis, we analysed the same fractions by western blot using antibodies detecting the His-tag (Figure 4) that would then indicats the incorporation of AzF.

Figure 4: Western Blot anti His tag analysis of Cerberus production NI: non-induced, I-AzF: induced without AzF, I+AzF: induced with AzF, E: elution, MW: molecular weight ladder, Ctrl N-ter: Control protein with an N-terminus His Tag, Ctrl C-ter: Control protein with an C-terminus His Tag.

Anti-His-tag antibodies revealed a band at about 45 kDa in the sample corresponding to IPTG induction in the presence of AzF (lane I+AzF). This band is not present in control samples (lane NI and I-AzF), indicating that it corresponds to Cerberus protein (theoretical size: 41 kDa). In addition to the full length protein, we observed several extra bands which very likely correspond to proteolysis products since they are detected with the anti-His-tag antibodies. Moreover, the band at 45 kDa is clearly detected in elution samples (lanes E). The purification level of Cerberus with monomeric streptavidin in the elution samples was estimated about 62%. These data show that Cerberus was efficiently purified and can be used for pull down assays. In addition, these results show that experimental setup to produce Cerberus also leads to the production of Orthos when the amber stop codon is not recognized by the AzF-charged orthogonal tRNA. Although Orthos does not contain a His-tag at its C-terminus, the protein seems to be efficiently co-purified with Cerberus. The basis of this observation is unclear but this result may suggest that Orthos and Cerberus interact with each other.

Validation of Cerberus

Validation of AzF head using FITC (Fluorescein isothiocyanate) molecules

To test the potential of Cerberus in functionalizing cellulose, we monitored its ability to mediate an interaction between cellulose and a fluorescent compound. To generate a fluorescently labelled Cerberus protein, we performed a SPAAC reaction on 3.2 µM Cerberus protein using 31.9 µM of FITC-DBCO (Jena Bioscience). In control experiment, 31.9 µM of FITC alone was used. These samples were then incubated with cellulose for 16 hours and after several washes with resuspension buffer (50mM Tris HCl pH 8), fluorescence levels were measured in the cellulose pellet fractions (Figure 5). We observed that the fluorescence levels in the cellulose pellet incubated with Cerberus protein clicked to FITC were about 3 times higher than in the control experiments corresponding to the cellulose pellet incubated with FITC alone. These results show that Cerberus can efficiently be conjugated with fluorescent molecules bearing a DBCO group by click chemistry and that the resulting fluorescent molecules strongly interact with cellulose.This result proves that cerberus' AzF head is valid and therefore, makes our construction both a practical and potent platform to functionalize cellulose.

Figure 5: Fluorescence remaining in cellulose fraction after several washes Experiment were performed in quadruplicate test in 50 mM Tris HCl pH 8 using 100μL of 10mg/ml Regenerated Amorphous Cellulose and 100μL of click reaction. Samples were incubated for 30 minutes, centrifugated, supernatant discarted and resuspended in Tris HCl four times , *Mann Whitney test p-value 0.03 computed using R 3.4.2.

Validation of Streptavidin Head

To asses the functionality of the Streptavidin head, we used a non AzF version of Cerberus. We performed SPAAC reaction to ligate in vitro biotin-DBCO to an azide-functionalized fluorescein (FITC), thus leading to the expected biotinylated FITC. 5.8 μM of Orhtos (Non AzF containing Cerberus) were incubated with 58.0μM of biotinylated FITC for one hour under shaking and then incubated with regenerated amorphous cellulose as descibed previously. Fluorescence was measured after four washes and results are presented in figure 6.

Figure 6: Fluorescence remaining in cellulose fraction after several washes Experiment were performed in quadruplicate test in 50 mM Tris HCl pH 8 using 100μL of 10mg/ml Regenerated Amorphous Cellulose and 100μL of binding reaction. Samples were incubated for 30 minutes, centrifugated, supernatant discarted and resuspended in Tris HCl four times , *Mann Whitney test p-value 0.1 computed using R 3.4.2.

The results indicates that fluorescence retained in cellulose pellet is higher when orthos is present which indicates that the binding between biotinylated FITC and Streptavidin was effective, proving that the activity of both streptavidin and CBM3 remains intact when fused. Furthermore, the usage of DBCO-Biotin can make our system also capable of binding Azide containing compounds and Avidin contaning proteins.

Validation using paramagnetic beads

The functionality of Cerberus was further characterized using paramagnetic beads. To bind paramagnetic beads to Cerberus, we performed a click reaction using 3.2 µM of Cerberus protein and 32 µM DBCO-conjugated paramagnetic beads. In control experiment, 32 µM of paramagnetic beads were used. These samples were then incubated with cellulose, and after several washes with resuspension buffer, the magnetic capacity of cellulose using a magnet was observed and filmed (See video below). The cellulose incubated with the Cerberus protein conjugated to paramagnetic beads responded quickly and was totally collected by the magnet. In contrast, in the control experiment, we only observed a slight movement of a part of the cellulose towards the magnet. This can be explained by the fact that washes do not remove all paramagnetic beads non-attached to the cellulose, or that paramagnetic beads naturally bind to cellulose but this interaction is not strong enough to resist to the washes.