Difference between revisions of "Part:BBa K731480"

(Usage and Biology)
Line 4: Line 4:
 
A sfGFP tagged CysDes inducible by IPTG.  
 
A sfGFP tagged CysDes inducible by IPTG.  
  
This part encodes a cysteine desulfhydrase (CysDes) from ''Treponema denticola'' [https://parts.igem.org/Part:BBa_K731600  (BBa_K731600)] downstream of a strong expression IPTG inducible cassette (BBa_K731300) in the pSB1C3 backbone. When transformed in ''E. coli'' strain NEB10b and induced with IPTG this biobrick produces an enzyme converting L-cysteine into hydrogen sulfide, pyruvate and ammonia.
+
This part encodes a cysteine desulfhydrase (CysDes) from ''Treponema denticola'' [https://parts.igem.org/Part:BBa_K731600  (BBa_K731600)] downstream of a strong expression IPTG inducible cassette ([https://parts.igem.org/Part:BBa_K731300 BBa_K731300]) in the pSB1C3 backbone. When transformed in ''E. coli'' strain NEB10b and induced with IPTG this biobrick produces an enzyme converting L-cysteine into hydrogen sulfide, pyruvate and ammonia.
  
 
This part was cloned by the iGEM Trento 2012 team for the creation of an aerobically engineered pathway for the removal of the black crust disfiguring marble stones. Further information about this part and its characterization can be found in the iGEM Trento 2012 wiki page.
 
This part was cloned by the iGEM Trento 2012 team for the creation of an aerobically engineered pathway for the removal of the black crust disfiguring marble stones. Further information about this part and its characterization can be found in the iGEM Trento 2012 wiki page.
  
For a characterization on the enzymatic activity check also to part BBa_K731400.
+
For a characterization on the enzymatic activity check also to part [https://parts.igem.org/Part:BBa_K731600 BBa_K731400].
  
 
'''SAFETY NOTES:'''
 
'''SAFETY NOTES:'''
Line 25: Line 25:
 
This part produces high levels of CysDes enzyme upon IPTG induction. Protein expression levels have been monitored with the sfGFP tagged composite part BBa_K731480.
 
This part produces high levels of CysDes enzyme upon IPTG induction. Protein expression levels have been monitored with the sfGFP tagged composite part BBa_K731480.
  
Part BBa_K731400 has been fully characterized in psB1C3 and also in the low copy vector psB4K5 using ''E. coli'' strain NEB10b.
+
Part [https://parts.igem.org/Part:BBa_K731600 BBa_K731400] has been fully characterized in psB1C3 and also in the low copy vector psB4K5 using ''E. coli'' strain NEB10b.
  
  

Revision as of 13:10, 13 September 2012

IPTG Inducible sfGFP tagged Cysteine desulfhydrase (CysDes)

A sfGFP tagged CysDes inducible by IPTG.

This part encodes a cysteine desulfhydrase (CysDes) from Treponema denticola (BBa_K731600) downstream of a strong expression IPTG inducible cassette (BBa_K731300) in the pSB1C3 backbone. When transformed in E. coli strain NEB10b and induced with IPTG this biobrick produces an enzyme converting L-cysteine into hydrogen sulfide, pyruvate and ammonia.

This part was cloned by the iGEM Trento 2012 team for the creation of an aerobically engineered pathway for the removal of the black crust disfiguring marble stones. Further information about this part and its characterization can be found in the iGEM Trento 2012 wiki page.

For a characterization on the enzymatic activity check also to part BBa_K731400.

SAFETY NOTES: Please note that this part produces hydrogen sulfide, which is toxic if inhaled in high concentrations. Cells handling should be done under a chemical hood. A safety handbook to work with sulfate reducing bacteria is posted on the Trento 2012 wiki.


Usage and Biology

CysDes is a unique 45 KDa hemolysin cysteine dependent, that was shown to have also aminostransferase activity. (1, 2) The enzyme catalyzes the degradation of L-cysteine to produce hydrogen sulfide, ammonia and pyruvate.

This part produces high levels of CysDes enzyme upon IPTG induction. Protein expression levels have been monitored with the sfGFP tagged composite part BBa_K731480.

Part BBa_K731400 has been fully characterized in psB1C3 and also in the low copy vector psB4K5 using E. coli strain NEB10b.


AT1480 1.jpg

FIGURE 1. Protein expression and cell growth upon IPTG induction NEB10b cells transformed with BBa_K731480 were grown in LB at 37C until OD of 0.7 and induced with different concentrations of IPTG. After 4 hours a 1.5 mL aliquot was taken from each sample. Cells were span down and resuspended in 1.5 mL of PBS. Panel A: Fluorescence measurements were taken with a Varian Cary Eclipse Spectrophometer using an excitation wavelenght of 464 nm. Panel B: Optical density at 600 nm.


AT1480 2.jpg

FIGURE 2. Effects of glycerol and glucose on protein expression levels. Cells were grown at 37C in LB until it was reached an OD of 0.4. The cells were at this point span down and resuspended in an equal volume of MOPS medium and allowed to grow to an OD of 0.6. Prior induction the cells were splitted into two samples of equal volume and one of the two sample was induced with 0.1 mM IPTG. After 4 hours a 1.5 mL aliquot was taken to measure fluorescence intensity. The assay was performed always in the presence of 1 mM L-cysteine and in two different MOPS media. MOPS A: 60 mM glycerol (yellow). MOPS B: 30 mM glucose (blue). The experiment has been performed in triplicate.


AT1480 3.jpg

FIGURE 3. Effect of cysteine on protein expression levels. Cells were grown at 37C in LB until it was reached an OD of 0.4. The cells were at this point span down and resuspended in an equal volume of MOPS medium and allowed to grow to an OD of 0.6. Prior induction the cells were splitted into two samples of equal volume and one of the two sample was induced with 0.1 mM IPTG. After 4 and 8 hours of induction a 1.5 mL aliquot was taken to measure fluorescence intensity. The assay was performed in the presence and in the absence of 1 mM L-cysteine and two different media: MOPS A, 60 mM glycerol (yellow), MOPS B, 30 mM glucose (blue).


AT1480 4.jpg

FIGURE 4. CysDes toxicity test by optical density and serial dilution. Cells were grown under the same conditions described as before. At 4 and 8 hours of induction a 500 µl sample was taken from the uninduced and the induced culture and used to make serial dilutions ranging from 1:100 up to 1:10ˆ6. A 200 µl aliquot of each serial dilution was plated on LB agar and placed overnight at 37C. The following day the number of colonies from each plate were counted. Conditions used are MOPS with 60 mM glycerol (A) and MOPS with 30 mM glucose (B). All experiments were done in the presence of 1 mM cysteine. Panel A: Optical density at different time points in MOPS A (A) and B (B). Colonies Forming Unit (CFU) at 4 hours and 8 hours in MOPS A (C) and MOPS B (D).

References

1. INFECTION AND IMMUNITY, Nov. 1995, p. 4448–4455
2. Appl Microbiol Biotechnol (2003) 62:239–243


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal BamHI site found at 2460
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    INCOMPATIBLE WITH RFC[25]
    Illegal NgoMIV site found at 1559
  • 1000
    INCOMPATIBLE WITH RFC[1000]
    Illegal SapI.rc site found at 2490