Difference between revisions of "Part:BBa K3832000"

(4.Characterization & Measurement)
 
(52 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
<partinfo>BBa_K3832000 short</partinfo>
 
<partinfo>BBa_K3832000 short</partinfo>
  
This part encodes a mutant of AroG (3-deoxy-7-phosphoheptulonate synthase, EC 2.5.1.54 ), in which serine at 211 was replaced by phenylalanine. The mutant can relieve the allosteric inhibition of phenylalanine, thus increasing the catalytic rate and downstream product yield.   
+
This part encodes a mutant of aroG (3-deoxy-7-phosphoheptulonate synthase, EC 2.5.1.54 ),in which serine at 211 was replaced by phenylalanine. The mutant can relieve the allosteric inhibition of phenylalanine, thus increasing the catalytic rate and downstream product yield.   
  
The enzyme that encoded by the sequence catalyze the following reactions:
+
The enzyme that encoded by the sequence catalyze the following reactions:<br/>
phosphoenolpyruvate+D-erythrose 4-phosphate+H2O =3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate +phosphate
+
'''phosphoenolpyruvate+D-erythrose 4-phosphate+H2O =3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate +phosphate'''
  
Derived from E.coli DH5alpha strain.
+
Derived from ''E.coli'' DH5alpha strain.<br><br>
 +
 
 +
'''(Detailed information is also shown on our wiki:[https://2021.igem.org/Team:XJTU-China/Improve Team:XJTU-China/Improve])'''
  
 
<!-- Add more about the biology of this part here-->
 
<!-- Add more about the biology of this part here-->
Line 25: Line 27:
  
  
===1.Useage & Biology===
+
==1.Useage & Biology==
This part encodes a mutant of aroG(as the improvement of part [https://parts.igem.org/Part:BBa_K1060000(BBa_K1060000)]. It can be expressed in Prokaryote cells, and functionally verified in E.coli DH5alpha strain.  
+
This part encodes a mutant of aroG (as the '''improvement''' of part [https://parts.igem.org/Part:BBa_K1060000 (BBa_K1060000)],it can be expressed in Prokaryote cells, and functionally verified in ''E.coli'' DH5alpha strain.  
  
 
Under physiological conditions, aroG catalyze the reaction phosphoenolpyruvate + D-erythrose 4-phosphate + H2O = 3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate  + phosphate. This reaction is a key branching point of the glycolysis and shikimate pathways. Expression of aroG can lead to more substrate into the shikimate pathway, which can improve the yield of downstream products as tryptophan, phenylalanine, tyrosine and benzazole.
 
Under physiological conditions, aroG catalyze the reaction phosphoenolpyruvate + D-erythrose 4-phosphate + H2O = 3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate  + phosphate. This reaction is a key branching point of the glycolysis and shikimate pathways. Expression of aroG can lead to more substrate into the shikimate pathway, which can improve the yield of downstream products as tryptophan, phenylalanine, tyrosine and benzazole.
  
In our project, aroG-s211f is used to improve the production of tryptophan. Considering the over-expression of aroG-s211f could significantly reduce the amount of substrate (glucose) entering the glycolysis reaction, in turn affects the normal process of cell proliferation, the expression of aroG is designed under strict control by Toggle-switch circuit (View our design on [https://2021.igem.org/Team:XJTU-China/Design(Team:XJTU-China/Design - 2021.igem.org)]).
+
In our project, aroG-S211F is used to improve the production of tryptophan. Considering the over-expression of aroG-S211F could significantly reduce the amount of substrate (glucose) entering the glycolysis reaction, in turn affects the normal process of cell proliferation, the expression of aroG is designed under strict control by Toggle-switch circuit (View our design on [https://2021.igem.org/Team:XJTU-China/Design Team:XJTU-China/Design]).
  
===2.Structure===
+
==2.Structure==
 +
To investigate the mechanism of Phe inhibition on AroG and the effect of point mutation (S211F) in AroG on the PEP catalytic activity of AroG, this issue is proposed to be quantified and visualized using PyMOL, Gaussian16.0W, GaussView6.0, Swiss, AutoDockTools software. Here the effect of this mutation is discussed in structure and binding energy.
  
 +
===2.1 Bingding Energy Prediction===
 +
====2.1.1 Allosteric inhibition effect of Phe ====
 +
The average value of the binding energy is obtained by repeating the docking several times. When the Phe ligand is not bound, the binding energy of aroG and PEP is -5.5kcal; and when the Phe is bound to aroG tetramer at the corresponding site, the binding energy becomes -5.2kcal.<br>
 +
Conclusively, the binding of Phe to AroG has an inhibitory effect of PEP binding to AroG.<br>
 +
[[File:XJTU-aroG-2.1.png|500px]]
 +
<br>'''''Figure 2.1''''' ''Allosteric inhibitory effect of Phe''<br>
  
===3.Characterization & Measurement===
+
===2.1.2 Effect of point mutations on the catalytic activity of AroG===
We have constructed the inducible circuit [https://parts.igem.org/Part:BBa_K3832008(BBa_K3832008)] to characterize and measure the function of aroG-s211f, by detecting the yield of tryptophan. Besides, to verify the impact of aroG-s211f to the cell proliferation, we measured the growth curve of the wild-type E.coli and the engineered E.coli with aroG-s211f.
+
[[File:XJTU-aroG-table.png|700px]]<br>
 +
From the comparison of the table data, the binding ability of the mutant aroG and Phe is weaker than that of the wild-type aroG, and the binding ability of the mutant aroG to PEP, in the case that the corresponding site has been combined with Phe, is greatly improved compared to the wild-type aroG. <br>
 +
Therefore, without considering the software simulation docking error, it can be concluded that the Phe allosteric inhibitory effect of mutant aroG is weakened.
  
Fig. 3.1 shows the yield of tryptophan. The engineered E.coli with aroG-s211f induced by 1mM IPTG resents a increased production of tryptophan, comparing in absent of IPTG or aroG-s211f (wild-type E.coli).
+
===2.2 Structure Prediction===
 +
====2.2.1 The docking results of AroG with Phe and PEP====
 +
 
 +
[[File:XJTU-aroG-2.2.png|300px]]
 +
<br>'''''Figure 2.2''''' ''Cartoon_docking result of AroG and Phe''<br>
 +
[[File:XJTU-aroG-2.3.png|300px]]
 +
<br>'''''Figure 2.3''''' '' Surface_docking result of AroG and Phe''<br>
 +
In the figure, the yellow is the experimentally measured conformation of Phe in the crystal protein bound by aroG and Phe, and the green is the docking site and the conformation of Phe predicted by AutoDockTools software. Obviously, the ligand receptor docking site predicted by the AutoDockTools software is completely consistent with the actual site, but there is a slight difference in the conformation of Phe. Therefore, the prediction of binding energy can be more credible. <br>
 +
The following figure shows the docking visualization results of PEP and AroG:<br>
 +
[[File:XJTU-aroG-2.4.png|300px]]
 +
<br>'''''Figure 2.4''''' ''Transparent of ligand site_docking result of AroG and PEP''<br>
 +
[[File:XJTU-aroG-2.5.png|300px]]
 +
<br>'''''Figure 2.5''''' ''Transparent_docking result of AroG and PEP''<br>
 +
[[File:XJTU-aroG-2.6.png|300px]]
 +
<br>'''''Figure 2.6''''' ''Scale model of PEP_docking result of AroG and PEP''<br>
 +
 
 +
====2.2.2 Comparison of the wild-type and mutant AroG====
 +
PEP site:<br>
 +
[[File:XJTU-aroG-2.7.png|300px]]
 +
<br>'''''Figure 2.7''''' ''Transparent of ligand site_docking result of MutAroG and PEP''<br>
 +
According to the docking results, the protein pocket conformation of wild-type and mutant AroG bound to PEP has not changed significantly. The Red is the experimentally measured conformation of Phe in the crystal protein bound by aroG and Phe, and the pink is the docking site and the conformation of Phe predicted by AutoDockTools software. In general, the changes in binding PEP sites are not very significant.<br>
 +
Phe site:<br>
 +
[[File:XJTU-aroG-2.8.png|800px]]
 +
<br>'''''Figure 2.8''''' ''Comparison between docking site of Phe, (a)Binding site of wild-type AroG and Phe;(b)Binding site of mutant AroG-S211F and Phe, in which mutant site is shown as red''<br>
 +
It can be seen from the docking results that the Ser at AroG 211 mutating to Phe changes the conformation of the protein pocket which originally binds to Phe, and the binding site of Phe changes accordingly. The binding energy calculated by AutoDockTools software shows that the binding ability of mutant aroG and Phe becomes weaker. Therefore, it can be concluded that the conformation of the mutant aroG and Phe binding protein pocket changes, so that the binding ability of Phe to it becomes smaller, and  the  allosteric inhibition effect of Phe is reduced, finally the catalytic efficiency of aroG on PEP increases.
 +
<br><br>
 +
 
 +
====Concrete methods, results, analysis and other addition information are shown in our wiki: [https://2021.igem.org/Team:XJTU-China/protein_model Team:XJTU-China/Protein Modeling].====
 +
 
 +
==3. Construction and Verification of aroG-S211F Circuit ==
 +
 
 +
aroG S211F gene was chemically synthetized by Genewiz and cloned into pET28a+ backbone by Golden Gate assembly (BsaI). After transformed into '''E.coli''' DH5alpha, plasmid extraction and electrophoresis, PCR amplification and sequencing were conducted to confirm its correctness. The results are listed in Fig. 3.1
 +
<br>[[File:T--XJTU-China--aroG.png|500px]]<br>
 +
'''''Fig. 3.1''''' ''The DNA agarose gel electrophoresis result of AroG-S211F circuit, plasmid and PCR product. (a) The length of the circuit is 2503bp (b) The length of the plasmid is 4738bp. And the two discrete bands are thought as either open-coiled or super-coiled plasmids (c)The amplicon is expected to be 2526bp.''<br>
 +
<br>
 +
Meanwhile, the quantitatively assay by RT-qPCR was also performed to verified its mRNA level. As shown in Fig. 3.2, the transcriptional level was increased about two folds after IPTG induction, indicating the circuit was successfully constructed with functional aroG mutant. The basal expression of aroG without IPTG induction can be observed due to one copy of native aroG in E.coli genome.
 +
<br>[[File:T--XJTU-China--improvement3.1.png|500px]]<br>
 +
'''''Fig. 3.2''''' ''The relative mRNA level of aroG-S211F in DH5alpha strain with Part:BBa_K3832008 inserted in pET28a+ vector.''
 +
 
 +
==4.Characterization & Measurement==
 +
We have constructed the inducible circuit [https://parts.igem.org/Part:BBa_K3832008 BBa_K3832008]to characterize and measure the function of aroG-S211F, by detecting the yield of tryptophan. Besides, to verify the impact of aroG-S211F to the cell proliferation, we measured the growth curve of the wild-type ''E.coli'' and the engineered ''E.coli'' with aroG-S211F.<br>
 +
 
 +
The circuit BBa_K3832008 is inserted into pET28a+ vector. DH5alpha with empty pET28a+ plasmid is used as negative control, representing the function of native aroG which is contained in the genome of ''E.coli''.<br>
 +
<br>'''For more information on our methods and results, please see our wiki: [https://2021.igem.org/Team:XJTU-China/Improve Team:XJTU-China/Improve]'''
 +
<br/><br>
 +
 +
As shown in Fig. 4.1, compared with the ''E.coli'' harboring the blank vector and native aroG gene (BBa_K1060000), the yield of tryptophan in the engineered E.coli with aroG-S211F induced by 1 mM IPTG continuously increased in the 30 h cultivation (green triangle), reaching a maximal productivity of 160 mg/ml per OD, while the blank controls slowly increased and maintained its production at about 1200 min, arriving about 80 mg/ml per OD, half of the previous one (circle and square). It is the same case in absent of IPTG (blue triangle), indicating the low leaky expression of our circuit. In all, our circuit containing AroG-S211F can efficiently produce tryptophan with the highest productivity of 160 mg/ml per OD, which can be further improved under the control of toggle-switch.
 
<!--Figure 3.1-->
 
<!--Figure 3.1-->
As is showed in Fig. 3.2, by using the Logistic equation to fit the growth curve, the inhibitory effect of aroG expression on cell proliferation was verified (as the parameter r decreased in E.coli with aroG-s211f and induced by IPTG, which represents the reciprocal of the time it takes for the population to double).
+
 
 +
[[File:XJTU-Part-aroG-3-1.png|800px]]
 +
 
 +
'''''Fig. 4.1 The relationship between tryptophan concentration in culture medium and culture time. The concentration of tryptophan is measured by PDAB chromogenic method.'''''
 +
 +
<br/>
 +
 +
The over-expression of aroG inhibits the glycolysis pathway, thus definitely affecting the cell growth. So the effect of aroG-S211F on cell proliferation was also detected. The OD600 of engineered ''E.coli'' and blank strain were continuously monitored, as shown in Fig.4.2 The Logistic equation was used to fit the growth curve, the obvious inhibitory effect of aroG expression on cell proliferation was observed, especially with IPTG induction. The growth parameters K (environmental capacity) and r (intrinsic growth rate) of different experimental groups was also obtained from the fitting Logistic curve, and the parameter r decreased dramatically in ''E.coli'' with aroG-S211F induced by IPTG, indicating the increased doubling time of the cell.
 
<!--Figure 3.2-->
 
<!--Figure 3.2-->
  
===4.Modeling===
+
[[File:XJTU-Part-aroG-3-2.png|600px]]
 +
 
 +
'''''Fig. 4.2 (a) The population density of E.coli was measured at 600nm by colorimetry.  The scatter represents the result of the measurement. The Logistic equation was used to fit the growth curve, and the fitting results were shown in the curve. (b)  shows the growth parameters K (environmental capacity) and r (intrinsic growth rate) of different experimental groups obtained from the fitting results in (a).'''''
 +
 +
<br/>
 +
 +
Here DH5alpha with empty vector has been used as the control, which can represent the function and character of wild-type aroG[https://parts.igem.org/Part:BBa_K1060000 (BBa_K1060000)],for this gene is contained in the genome of ''E.coli''.
 +
 
 +
==5 Conclusions ==
 +
A lacUV5 controlled-aroG S211F gene circuit was successfully constructed, and the overexpression of aroG-S211F significantly improved the tryptophan production, with a highest productivity of 160 mg/ml per OD. Protein structure modeling elucidate that the improvement may attribute to the elimination of the allosteric inhibition of phenylalanine, thus increasing the catalytic rate and downstream product yield. However, because of the inhibition on the glycolysis pathway of aroG, the cell growth was obviously inhibited. The results confirmed our hypothesis that cell proliferation and tryptophan production should be separated, and it has been designed to be strictly controlled by toggle-switch circuit, in which cell proliferation (pykA gene overexpression) and tryptophan production (aroG-S211F overexpression) was constructed in the two arms of toggle-switch. (View our design on Team:XJTU-China/Design).

Latest revision as of 03:26, 22 October 2021


aroG (Mutant S211F)

This part encodes a mutant of aroG (3-deoxy-7-phosphoheptulonate synthase, EC 2.5.1.54 ),in which serine at 211 was replaced by phenylalanine. The mutant can relieve the allosteric inhibition of phenylalanine, thus increasing the catalytic rate and downstream product yield.

The enzyme that encoded by the sequence catalyze the following reactions:
phosphoenolpyruvate+D-erythrose 4-phosphate+H2O =3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate +phosphate

Derived from E.coli DH5alpha strain.

(Detailed information is also shown on our wiki:Team:XJTU-China/Improve)


Sequence and Features


Assembly Compatibility:
  • 10
    COMPATIBLE WITH RFC[10]
  • 12
    COMPATIBLE WITH RFC[12]
  • 21
    INCOMPATIBLE WITH RFC[21]
    Illegal XhoI site found at 934
  • 23
    COMPATIBLE WITH RFC[23]
  • 25
    COMPATIBLE WITH RFC[25]
  • 1000
    COMPATIBLE WITH RFC[1000]



1.Useage & Biology

This part encodes a mutant of aroG (as the improvement of part (BBa_K1060000),it can be expressed in Prokaryote cells, and functionally verified in E.coli DH5alpha strain.

Under physiological conditions, aroG catalyze the reaction phosphoenolpyruvate + D-erythrose 4-phosphate + H2O = 3-deoxy-D-arabino-hept-2-ulosonate 7-phosphate + phosphate. This reaction is a key branching point of the glycolysis and shikimate pathways. Expression of aroG can lead to more substrate into the shikimate pathway, which can improve the yield of downstream products as tryptophan, phenylalanine, tyrosine and benzazole.

In our project, aroG-S211F is used to improve the production of tryptophan. Considering the over-expression of aroG-S211F could significantly reduce the amount of substrate (glucose) entering the glycolysis reaction, in turn affects the normal process of cell proliferation, the expression of aroG is designed under strict control by Toggle-switch circuit (View our design on Team:XJTU-China/Design).

2.Structure

To investigate the mechanism of Phe inhibition on AroG and the effect of point mutation (S211F) in AroG on the PEP catalytic activity of AroG, this issue is proposed to be quantified and visualized using PyMOL, Gaussian16.0W, GaussView6.0, Swiss, AutoDockTools software. Here the effect of this mutation is discussed in structure and binding energy.

2.1 Bingding Energy Prediction

2.1.1 Allosteric inhibition effect of Phe

The average value of the binding energy is obtained by repeating the docking several times. When the Phe ligand is not bound, the binding energy of aroG and PEP is -5.5kcal; and when the Phe is bound to aroG tetramer at the corresponding site, the binding energy becomes -5.2kcal.
Conclusively, the binding of Phe to AroG has an inhibitory effect of PEP binding to AroG.
XJTU-aroG-2.1.png
Figure 2.1 Allosteric inhibitory effect of Phe

2.1.2 Effect of point mutations on the catalytic activity of AroG

XJTU-aroG-table.png
From the comparison of the table data, the binding ability of the mutant aroG and Phe is weaker than that of the wild-type aroG, and the binding ability of the mutant aroG to PEP, in the case that the corresponding site has been combined with Phe, is greatly improved compared to the wild-type aroG.
Therefore, without considering the software simulation docking error, it can be concluded that the Phe allosteric inhibitory effect of mutant aroG is weakened.

2.2 Structure Prediction

2.2.1 The docking results of AroG with Phe and PEP

XJTU-aroG-2.2.png
Figure 2.2 Cartoon_docking result of AroG and Phe
XJTU-aroG-2.3.png
Figure 2.3 Surface_docking result of AroG and Phe
In the figure, the yellow is the experimentally measured conformation of Phe in the crystal protein bound by aroG and Phe, and the green is the docking site and the conformation of Phe predicted by AutoDockTools software. Obviously, the ligand receptor docking site predicted by the AutoDockTools software is completely consistent with the actual site, but there is a slight difference in the conformation of Phe. Therefore, the prediction of binding energy can be more credible.
The following figure shows the docking visualization results of PEP and AroG:
XJTU-aroG-2.4.png
Figure 2.4 Transparent of ligand site_docking result of AroG and PEP
XJTU-aroG-2.5.png
Figure 2.5 Transparent_docking result of AroG and PEP
XJTU-aroG-2.6.png
Figure 2.6 Scale model of PEP_docking result of AroG and PEP

2.2.2 Comparison of the wild-type and mutant AroG

PEP site:
XJTU-aroG-2.7.png
Figure 2.7 Transparent of ligand site_docking result of MutAroG and PEP
According to the docking results, the protein pocket conformation of wild-type and mutant AroG bound to PEP has not changed significantly. The Red is the experimentally measured conformation of Phe in the crystal protein bound by aroG and Phe, and the pink is the docking site and the conformation of Phe predicted by AutoDockTools software. In general, the changes in binding PEP sites are not very significant.
Phe site:
XJTU-aroG-2.8.png
Figure 2.8 Comparison between docking site of Phe, (a)Binding site of wild-type AroG and Phe;(b)Binding site of mutant AroG-S211F and Phe, in which mutant site is shown as red
It can be seen from the docking results that the Ser at AroG 211 mutating to Phe changes the conformation of the protein pocket which originally binds to Phe, and the binding site of Phe changes accordingly. The binding energy calculated by AutoDockTools software shows that the binding ability of mutant aroG and Phe becomes weaker. Therefore, it can be concluded that the conformation of the mutant aroG and Phe binding protein pocket changes, so that the binding ability of Phe to it becomes smaller, and the allosteric inhibition effect of Phe is reduced, finally the catalytic efficiency of aroG on PEP increases.

Concrete methods, results, analysis and other addition information are shown in our wiki: Team:XJTU-China/Protein Modeling.

3. Construction and Verification of aroG-S211F Circuit

aroG S211F gene was chemically synthetized by Genewiz and cloned into pET28a+ backbone by Golden Gate assembly (BsaI). After transformed into E.coli DH5alpha, plasmid extraction and electrophoresis, PCR amplification and sequencing were conducted to confirm its correctness. The results are listed in Fig. 3.1
T--XJTU-China--aroG.png
Fig. 3.1 The DNA agarose gel electrophoresis result of AroG-S211F circuit, plasmid and PCR product. (a) The length of the circuit is 2503bp (b) The length of the plasmid is 4738bp. And the two discrete bands are thought as either open-coiled or super-coiled plasmids (c)The amplicon is expected to be 2526bp.

Meanwhile, the quantitatively assay by RT-qPCR was also performed to verified its mRNA level. As shown in Fig. 3.2, the transcriptional level was increased about two folds after IPTG induction, indicating the circuit was successfully constructed with functional aroG mutant. The basal expression of aroG without IPTG induction can be observed due to one copy of native aroG in E.coli genome.
T--XJTU-China--improvement3.1.png
Fig. 3.2 The relative mRNA level of aroG-S211F in DH5alpha strain with Part:BBa_K3832008 inserted in pET28a+ vector.

4.Characterization & Measurement

We have constructed the inducible circuit BBa_K3832008to characterize and measure the function of aroG-S211F, by detecting the yield of tryptophan. Besides, to verify the impact of aroG-S211F to the cell proliferation, we measured the growth curve of the wild-type E.coli and the engineered E.coli with aroG-S211F.

The circuit BBa_K3832008 is inserted into pET28a+ vector. DH5alpha with empty pET28a+ plasmid is used as negative control, representing the function of native aroG which is contained in the genome of E.coli.

For more information on our methods and results, please see our wiki: Team:XJTU-China/Improve

As shown in Fig. 4.1, compared with the E.coli harboring the blank vector and native aroG gene (BBa_K1060000), the yield of tryptophan in the engineered E.coli with aroG-S211F induced by 1 mM IPTG continuously increased in the 30 h cultivation (green triangle), reaching a maximal productivity of 160 mg/ml per OD, while the blank controls slowly increased and maintained its production at about 1200 min, arriving about 80 mg/ml per OD, half of the previous one (circle and square). It is the same case in absent of IPTG (blue triangle), indicating the low leaky expression of our circuit. In all, our circuit containing AroG-S211F can efficiently produce tryptophan with the highest productivity of 160 mg/ml per OD, which can be further improved under the control of toggle-switch.

XJTU-Part-aroG-3-1.png

Fig. 4.1 The relationship between tryptophan concentration in culture medium and culture time. The concentration of tryptophan is measured by PDAB chromogenic method.


The over-expression of aroG inhibits the glycolysis pathway, thus definitely affecting the cell growth. So the effect of aroG-S211F on cell proliferation was also detected. The OD600 of engineered E.coli and blank strain were continuously monitored, as shown in Fig.4.2 The Logistic equation was used to fit the growth curve, the obvious inhibitory effect of aroG expression on cell proliferation was observed, especially with IPTG induction. The growth parameters K (environmental capacity) and r (intrinsic growth rate) of different experimental groups was also obtained from the fitting Logistic curve, and the parameter r decreased dramatically in E.coli with aroG-S211F induced by IPTG, indicating the increased doubling time of the cell.

XJTU-Part-aroG-3-2.png

Fig. 4.2 (a) The population density of E.coli was measured at 600nm by colorimetry. The scatter represents the result of the measurement. The Logistic equation was used to fit the growth curve, and the fitting results were shown in the curve. (b) shows the growth parameters K (environmental capacity) and r (intrinsic growth rate) of different experimental groups obtained from the fitting results in (a).


Here DH5alpha with empty vector has been used as the control, which can represent the function and character of wild-type aroG(BBa_K1060000),for this gene is contained in the genome of E.coli.

5 Conclusions

A lacUV5 controlled-aroG S211F gene circuit was successfully constructed, and the overexpression of aroG-S211F significantly improved the tryptophan production, with a highest productivity of 160 mg/ml per OD. Protein structure modeling elucidate that the improvement may attribute to the elimination of the allosteric inhibition of phenylalanine, thus increasing the catalytic rate and downstream product yield. However, because of the inhibition on the glycolysis pathway of aroG, the cell growth was obviously inhibited. The results confirmed our hypothesis that cell proliferation and tryptophan production should be separated, and it has been designed to be strictly controlled by toggle-switch circuit, in which cell proliferation (pykA gene overexpression) and tryptophan production (aroG-S211F overexpression) was constructed in the two arms of toggle-switch. (View our design on Team:XJTU-China/Design).