Revision as of 15:19, 1 October 2024

BG37: Autoinducible promoter in exponential phase

Synthetic promoter identified by Zobel et all (2015)

Overview

Synthetic biology constitutes an effort towards making biology easy to engineer [1]. This means that basic principles of engineering find their place in biological systems; We treat biomers as spare, interchangeable parts, the same way that we would approach the construction of any mechanical device. This necessitates the standardization of parts, in order to establish objectivity regarding their effectivates and to promote the acceleration of knowledge [2,3]. For our project, to identify the optimal components and regulatory mechanisms for our system, we employed the Design-Build-Test-Learn cycle, allowing us to manipulate the expression of our constructs throughout different phases of the bacterial life cycle. To minimize cellular stress, we strategically divided our system into two phases: the exponential and the stationary phase. During the exponential phase, we designed our system to express T7 polymerase and produce dsRNA molecules. In our pursuit of an autoinducible promoter active during the exponential phase, we explored the work of Zobel et al. and tested three of their synthetic promoters [4]. Through our focused examination of their autoinducible properties, we determined that BG37 emerged as the optimal choice for regulating our system. Thus, we decided to further characterize BG37 by assessing its performance across various bacterial chassis, employing different plasmid backbones and carbon sources. By thoroughly characterizing this new basic part, we believe it will serve as a valuable tool for future teams aiming for orthogonal expression during the exponential phase.

The origin of BG37

Zobel et al. identified the BG synthetic promoters by systematically analyzing promoter activities in E. coli and Pseudomonas strains, particularly P. aeruginosa and P. putida. They found that the consensus sequences, especially the −10 and −35 regions, closely resembled those of sigma-70 promoters in E. coli, which suggested similar transcriptional mechanisms across these species. Using an initial plasmid-based selection in E. coli PIR2 cells, they efficiently screened for effective synthetic promoters, confirming their comparable activity in both E. coli and Pseudomonas [4].

We were particularly interested in using this specific promoter due to the assertion made in Huseyin Tas's PhD thesis that it is a "standard promoter that is more orthogonal, durable to environmental changes, and exhibits a correlated constitutive character throughout exponential growth across different media." This characteristic aligns well with our project's requirements for a reliable and versatile promoter [5].

Our characterization approach

During our experimental design, we aimed to answer key biological questions about how the BG37 promoter functions across different bacterial chassis, environmental conditions, and plasmid backbones. We sought to understand whether BG37 could maintain consistent, orthogonal activity during the exponential phase and how factors like growth media, carbon sources, and vector backbones influence its performance for optimal system regulation.

The characterization plan aimed to address several key biological questions, including:

1. Is BG37 an effective orthogonal promoter across different bacterial chassis? <n>We aimed to collect more data on how BG37 functions in various bacterial strains to determine if it maintains consistent activity independent of host regulatory systems, ensuring its broad applicability and versatility [5].

2. How does BG37's activity compare to well-characterized promoters?

This comparison aimed to establish BG37's relative strength and its activation time point, providing a benchmark against known standards. We conducted a thorough characterization by comparing BG37 with the standard Anderson J23119 and the stationary osmY promoters, which allowed us to generate reliable and comparable data. This approach ensured that we could accurately assess BG37's performance in relation to well-established promoters. Characterization, being the process of estimating quantitative measures of part behavior, enabled us to quantify BG37's strength and activation time, providing a solid foundation for its use in future applications.

3. How do environmental factors, such as carbon sources and growth media, impact BG37’s performance?

Since various carbon sources lead to distinct metabolic products that can alter cellular physiology and energy availability, we aimed to assess if these metabolic shifts influence the promoter's activity. By testing BG37 with different carbon sources, we sought to determine whether changes in the cell's metabolic state would affect our system’s expression levels, ensuring its reliability in diverse growth environments [6].

4. Does BG37 function similarly across different plasmid backbone vectors?

This question aimed to assess whether the promoter’s activity remains consistent across different vectors, which is crucial for its versatility in synthetic biology. Moving a genetic construct from one context to another, such as different host organisms or plasmid backbones, significantly impacts the behavior of genetic devices. The genetic context, including host genome interactions and plasmid architecture, plays a pivotal role in determining the success of a genetic device [7]. One example of this is the influence of plasmid backbones. Key factors such as plasmid copy number, origin of replication, and plasmid stability can drastically alter gene expression levels [8].
Various plasmid backbones are needed to work with diverse chassis due to different compatible origins of replication. As a starting point, using E. coli DH5a cells, we checked the expression of BG37 in a Golden Braid pDGB3a vector, bearing pBR322 origin of replication, not replicable in Pseudomonas chassis. We additionally compared the behavior of BG37 in the Golden Standard pSEVA23g19[g1] vector, harboring pBBR1 origin of replication, replicable in Pseudomonas. The initial comparisons were performed on E. coli DH5α cells as an intermediate step before transitioning to P. putida [5].

The general spirit for our characterization was standardization to the best of our ability. Given our need for an orthogonally sound promoter, we focused on the reproducibility of results, testing on different chassis, adequate controls to pinpoint phase activation and strength, and measurements that covered the entirety of the bacterial population’s life cycle. This led to the gathering of detailed supporting data fit for a highly characterized Registry part. We hope that our efforts prove fruitful for future teams, as we add an autoinducible, synthetic, exponential phase- activated promoter.

Experimental Design

1st Experiment: Identification of the most suitable promoter for T7 polymerase production

To determine the most suitable promoter for the T7 polymerase production system we tested three BG synthetic promoters (i.e. BG17, BG37, BG42) from the Zobel et al. library [4]. We selected the promoters BG17, BG42, and BG37 based on findings from Zobel et al., which demonstrated their significant activation during the exponential growth phase. Our objective was to evaluate their temporal activation profiles and relative strength. We used E. coli BL21 (DE3) cells, which are able to express the T7 polymerase system , so they can serve as a relevant model for our engineered P. putida chassis, allowing us to evaluate our constructs’ effectiveness in a system closely resembling our final design.

The promoter J23119 serves as a positive control because it is a well-characterized constitutive promoter from the Anderson family, allowing for direct comparison of promoter strength and consistent activation throughout all growth phases [7]. Additionally, osmY is a well-characterized promoter specifically induced during the stationary phase, making it a valuable positive control for assessing time-dependent activation and promoter strength during this phase [8].

2nd Experiment: Evaluation of T7 polymerase production device

Our goal is to evaluate the performance of our designed device featuring the BG37 promoter. Due to time constraints, we decided to test T7 polymerase production by using an sfGFP reporter under the control of a T7 promoter. For this reason, the J23119 Anderson and BG37 constitutive promoters were used to drive T7 polymerase gene expression. The J23119 promoter served as a positive control for continuous T7 production, while E. coli cells with the pDGB3omega plasmid were used as a negative control. Additionally, we aimed to assess the timing of BG37 promoter activation, focusing on whether it activates specifically during the exponential phase. We used E. coli DH5a cells for this experiment, which are optimized for maintaining plasmids, with specific mutations (such as recA1 and endA1) that prevent unwanted recombination and degradation of foreign DNA and lack the T7 RNA polymerase system [9].

3rd Experiment: Influence of different backbone vectors on BG37 activation

Since various plasmid backbones have different characteristics (e.g. origin of replication) that are needed to work with different chassis, we compared the BG37 promoter’s performance by using the Golden Standard pSEVA23g19[g1] vector and the Golden Braid pDGB3a1 vector, while working with E. coli DH5α cells as an intermediate step before transitioning to P. putida. Simultaneously, we validated that its function is consistent across different genetic backbones, which reduces the likelihood of vector-specific behavior or artifacts [12].

4rd Experiment: Influence of different carbon sources on BG37 activation

For further characterization of the BG37 promoter, we evaluated its activity under two differnt carbon sources. Specifically, we utilized M9 minimal medium supplemented with either citrate or glucose as the sole carbon source to assess the promoter's responsiveness to different metabolic conditions. The reason for selecting these carbon sources was to repeat the experiment in P. putida , which can metabolize both, but due to time constraints, we were unable to complete this step [13] At the same time, literature suggests that citrate is not the optimal carbon source for E. coli, likely adding additional stress to the cells. By using osmy as a positive control, which is induced when σs is expressed (indicative of RNA polymerase activity under stress), and measuring the OD simultaneously, we aimed to understand the correlation between promoter activation and bacterial growth phase. Additionally, J23119 was used as a positive control for constitutive expression, allowing us to compare promoter strength across different growth phases and environmental conditions.

5th Experiment: Further characterization of BG37 in our design chassis: P. putidan

We chose to work with P. putida as it is our proposed chassis. The J23119 promoter was used as a positive control due to its well-documented robust performance in P. putida [14]. Moreover, since the stress response sigma factor σs is conserved between Pseudomonas species and E. coli, we employed osmy as a negative control to assess promoter activity under stress conditions, enabling us to understand the promoter behavior across various growth phases [15].

Experimental Procedure

It is worth noting that before conducting any experiment we used SnapGene to 1) in silico simulate the cloning of our constructs, 2) to verify the design and ensure compatibility of the parts, and 3) run a virtual agarose gel electrophoresis to identify the most suitable restriction enzymes for diagnostic digestion, and confirm banding patterns before stepping into the lab, thus optimizing our workflow and ensuring accurate results. We began by cloning the parts we needed (BG37, BG42, BG17, J23119, osmY, ter-BBa_B0015, sfGFP, T7pol), which included Golden Braid overhangs, into the pUPD2 vector. The promoters were synthesized by IDT with their respective RBSs already integrated. We used E. coli DH5α cells for the cloning procedure due to their high transformation efficiency.

Next, we transferred the basic parts from the pUPD2 vectors into the Golden Braid vectors: pDGB3a1 and pDGB3a2 vectors to assemble the level alpha constructs. This step enabled us to generate complete, functional genetic modules for further experimentation and analysis.

Once we obtained our level a constructs in the pDGB3a1 and pDGB3a2 vectors, we proceeded to create our level omega constructs (BG37-RBS2-T7polymerase-ter + T7pro-sfGFP-T7ter, PJ23119-RBS2-T7polymerase-ter + T7pro-sfGFP-T7ter) by cloning them into the pDGB3omega vector.

Simultaneously, we transferred our basic parts from the pUPD2 vectors into the Golden Standard vector, pSEVA23g19[g1], to generate Level 1 constructs. This vector was selected for its pBBR1 origin of replication, which enables compatibility with P. putida.

After assembling our plasmid constructs, we successfully transformed them into their respective chassis: E. coli BL21 (DE3), E. coli DH5α, and P. putida KT2440. The following day, we prepared liquid cultures to promote the growth and acclimatization of the transformed bacteria, allowing them to incubate overnight. On the third day, we centrifuged the cultures and washed the resulting pellets twice with NaOH. Subsequently, we performed a 1:100 dilution to measure the optical density at 600 nm (OD600). To achieve an OD600 of 0.1 with a final volume of 2 mL of M9 culture with the corresponding carbon source, we applied the dilution equation "Cinitial x Vinitial= C final x V final". M9 medium was selected for this experiment due to the fluorescence interference associated with LB medium. We then transferred 200 μL of each diluted culture into the wells of a 96-well plate with a clear bottom. Each construct was tested in five technical repeats. The plate was incubated in a plate reader for 15 hours at 37°C, which is optimal for E. coli growth, while shaking at 180 rpm. Measurements were automatically recorded every hour, monitoring OD at 600 nm and sfGFP fluorescence at 515 nm.

Results and discussion

1. Identification of the Most Suitable Promoter for T7 Polymerase Production

By observing Figure 11 and analyzing the OD600 measurements, we notice significant bacterial growth between the 1h and 8h time points for every promoter except BG37. Specifically, for the E. coli cells with the BG37 promoter, there is an increase up to the 12h mark, with the steady increase in OD600 between 6h and 12h suggesting that the cells are in the exponential phase.

Based on the graphs (Figure 12 and Figure 13) and OD600 data, which show the cells remaining in the exponential phase at 12 hours, BG37 demonstrates strong activity during this period. More specifically, at 6 hours, BG37 shows a significant increase in fluorescence, surpassing the other promoters and indicating its responsiveness during exponential growth. By 10 hours, it continues to exhibit higher regulation than BG17 and osmy. Even at 15 hours, as cells transition out of exponential growth, BG37 remains active, showing its sustained effectiveness.

In comparison, while J23119 and BG42 also perform well, BG37 stands out for its early activation (at 6 hours), making it ideal for systems needing robust expression during early exponential growth. Although BG42 and J23119 are more consistent across phases, BG37 is clearly the best promoter for targeted regulation during the exponential phase. Its early and sustained activity make it the most suitable choice for driving T7 polymerase production during exponential growth.

2. Evaluation of T7 polymerase production device

The growth curve shows that although BG37 and J23119 effectively drive strong expression of T7 polymerase and sfGFP, they cause a slight reduction in growth compared to the pDGB3 omega control. Simultaneously, the similarity between the growth profiles of J23119 and BG37 suggests that both promoters impose a comparable burden on the cells.

The BG37 promoter demonstrates strong autoinducible activity during the exponential phase and beyond, reaching expression levels comparable to or higher than the constitutive J23119 promoter. This confirms the utility of BG37 for applications requiring high expression during growth.

3. Influence of different backbone vectors on BG37 activation

Focusing on Figure 16, we observe that the exponential phase occurs between 2h and 10h. The cells containing only the pDGB3a1 (- control) exhibit the most robust growth. This is likely due to the absence of additional stress from the production of sfGFP, which is present in the other constructs, leading to a slower growth rate.

In Figure 17, we observe that the BG37 promoter is predominantly activated between 6h and 15h, after which its activity begins to decline. The J23119 promoter shows lower activity compared to BG37, and its activation correlates closely with the bacterial growth curve. On the other hand, the osmy promoter appears to be primarily activated during the stationary phase, starting after 10h.

Promoter J23119 in Figure 18 appears to have an extended lag phase lasting until the 7h time point. The other cells, including those containing only the pSEVA23g19[g1] (- control), exhibit growth curves that show the exponential phase occurring between the 4 and 11h time points.

In Figure 19 we observe that promoter J23119 has very high fluorescence levels, likely due to its prolonged lag phase. The BG37 promoter seems to activate around the time point 10h, outside of the bacterial exponential phase. At the same time, osmY promoter has very low activation levels even in the stationary phase.

Comparison of BG37 promoter’s behavior in pSEVA23g19[g1] and pDGB3a1

When comparing fluorescence intensity for BG37-RBS2-sfGFP-ter in two different plasmid vectors, we observe that the promoter is activated during the exponential phase but is also high in the stationary phase. Simultaneously, we observe higher levels of sfGFP’s expression when it is regulated by the BG37 promoter inserted in the pDGB3a1 vector.

Generally, moving a genetic construct from one context to another, such as different host organisms or plasmid backbones, significantly impacts the behavior of genetic devices. Key factors such as plasmid copy number, origin of replication, and plasmid stability can drastically alter gene expression levels [13].
In our case, pDGB3a1 is a high-copy number plasmid with a pBR322 origin of replication [14], whereas pSEVA23g19[g1] is a low-copy number plasmid harboring a pBBR1 origin of replication [15]. Additionally, in pDGB3a1, the promoter is positioned 1519 bp away from the origin of replication, while in pSEVA23g19[g1], the promoter is located just 304 bp from the replication origin. The differences in copy number and promoter proximity to the origin of replication have a substantial effect on gene expression. High-copy plasmids, such as pDGB3a1, provide a higher gene dosage, leading to elevated transcriptional output. Furthermore, the larger distance between the promoter and replication origin in pDGB3a1 likely minimizes interference between transcription and replication processes, particularly avoiding head-on collisions that can hinder replication fork progression. In contrast, the lower copy number of pSEVA23g19[g1] and the closer proximity of its promoter to the origin of replication increase the likelihood of interference between replication and transcription, especially if they occur in a head-on orientation. This may reduce the overall transcriptional efficiency in pSEVA23g19[g1], resulting in lower expression levels compared to pDGB3a1 [16].
Therefore, the combined effects of copy number, replication origin, and the spatial relationship between replication and transcription processes contribute to significant differences in the expression levels observed between these two plasmid backbones.

4. Influence of different carbon sources on BG37 activation

In M9 medium with citrate as a carbon source E. coli DH5α cells with BG37, J23119 and osmY promoters, as well as with only pDGB3a1 vector, appear to grow in a similar way. The exponential phase seems to be between 4-12h time points.

With citrate as a carbon source E. coli DH5a with J23119 and BG37 promoters seem to emit fluorescence signals even in the stationary phase, where we see the abrupt activation of the osmY promoter.

Comparison of BG37 promoter’s behavior in pSEVA23g19[g1] and pDGB3a1

The BG37 promoter’s regulation is clearly influenced by the carbon source. When glucose is the carbon source, BG37 drives stronger and more rapid expression. This can be attributed to glucose being a preferred and easily metabolizable carbon source that provides more direct and immediate energy for cellular processes, including transcription.
On citrate, promoter activation is delayed, and overall RFUs/OD600 (A.U.) values are lower. Citrate enters central metabolism through the TCA cycle, which requires more steps than glycolysis and may result in delayed and lower gene expression levels driven by BG37.

5. Further characterization of BG37 in our design chassis: P. putida

In Figure 26, we observe that bacteria with all constructs appear to have similar growth curves, with the exponential phase starting at the 4h time point and ending around the 12h time point.

In Figure 27 we see that J23119 and BG37 promoters’ signal starts to rise between the 6h and 10h point times, while the higher signal is observed at the 15h mark. At that point we also see high activation of the osmY promoter, indicating that we have reached the stationary phase.

This Figure 29 presents an evaluation of promoter’s activity in different bacterial chassis over time:

In E. coli DH5a (pSEVA23g19[g1]) BG37 promoter is activated in the exponential phase and continues to give a stable signal even in the stationary phase.
In E. coli BL21 (DE3) (pDGB3a1) and in P. putida KT2440 BG37 promoter is activated in the exponential phase but has a stronger signal in the early stationary phase.
In E. coli DH5a (pDGB3a1): BG37 promoter seems to give a strong signal in the late exponential phase that continues into the stationary phase.

Overall, each chassis and plasmid combination shows a distinct promoter activation profile, likely reflecting differences in growth rates, metabolic efficiency, and plasmid copy numbers across these bacterial strains.

References P. putida

[1] Tas, H., Amara, A., Cueva, M. E., Bongaerts, N., Calvo‐Villamañán, A., Hamadache, S., & Vavitsas, K. (2020). Are synthetic biology standards applicable in everyday research practice? In Microbial Biotechnology (Vol. 13, Issue 5, pp. 1304–1308). Wiley. https://doi.org/10.1111/1751-7915.13612

[2] Pei, L., Garfinkel, M., & Schmidt, M. (2022). Bottlenecks and opportunities for synthetic biology biosafety standards. Nature communications, 13(1), 2175. https://doi.org/10.1038/s41467-022-29889-y

[3] Müller, K. M., & Arndt, K. M. (2012). Standardization in synthetic biology. Methods in molecular biology (Clifton, N.J.), 813, 23–43. https://doi.org/10.1007/978-1-61779-412-4_2

[4] Zobel, S., Benedetti, I., Eisenbach, L., de Lorenzo, V., Wierckx, N., & Blank, L. M. (2015). Tn7-Based Device for Calibrated Heterologous Gene Expression in Pseudomonas putida. ACS synthetic biology, 4(12), 1341–1351. https://doi.org/10.1021/acssynbio.5b00058

[5] Taş, H. (2020). Upgrading Pseudomonas putida as a Synthetic Biology chassis through inter-operativity of genetic devices [Doctoral dissertation, Universidad Autónoma de Madrid].

[6] Blázquez, B., et all. (2023). Golden Standard: a complete standard, portable, and intraoperative MoClo tool for model and non-model proteobacteria. In Nucleic Acids Research (Vol. 51, Issue 19, pp. e98–e98). Oxford University Press (OUP). https://doi.org/10.1093/nar/gkad758 )

[7] Mirkin, E. V., & Mirkin, S. M. (2005). Mechanisms of transcription-replication collisions in bacteria. Molecular and cellular biology, 25(3), 888–895. https://doi.org/10.1128/MCB.25.3.888-895.2005

[8] Martin-Pascual, M., Batianis, C., Bruinsma, L., Asin-Garcia, E., Garcia-Morales, L., Weusthuis, R. A., van Kranenburg, R., & Martins dos Santos, V. A. P. (2021). A navigation guide of synthetic biology tools for Pseudomonas putida. In Biotechnology Advances (Vol. 49, p. 107732). Elsevier BV. https://doi.org/10.1016/j.biotechadv.2021.107732

[9] Yan, Q., & Fong, S. S. (2017). Study of in vitro transcriptional binding effects and noise using constitutive promoters combined with UP element sequences in Escherichia coli. Journal of biological engineering, 11, 33. https://doi.org/10.1186/s13036-017-0075-2

[10] Yim HH, Brems RL, Villarejo M. Molecular characterization of the promoter of osmY, an rpoS-dependent gene. J Bacteriol. 1994 Jan;176(1):100-7. doi: 10.1128/jb.176.1.100-107.1994. PMID: 8282684; PMCID: PMC205019.

[11] Sarrion-Perdigones A, Vazquez-Vilar M, Palací J, Castelijns B, Forment J, Ziarsolo P, Blanca J, Granell A, Orzaez D. GoldenBraid 2.0: a comprehensive DNA assembly framework for plant synthetic biology. Plant Physiol. 2013 Jul;162(3):1618-31. doi: 10.1104/pp.113.217661. PMID: 23669743; PMCID: PMC3707536.

[12] de Lorenzo, V., Krasnogor, N., & Schmidt, M. (2021). For the sake of the Bioeconomy: define what a Synthetic Biology Chassis is! In New Biotechnology (Vol. 60, pp. 44–51). Elsevier BV. https://doi.org/10.1016/j.nbt.2020.08.004

[13] Jahn M, Vorpahl C, Hübschmann T, Harms H, Müller S. Copy number variability of expression plasmids determined by cell sorting and Droplet Digital PCR. Microb Cell Fact. 2016 Dec 19;15(1):211. doi: 10.1186/s12934-016-0610-8. PMID: 27993152; PMCID: PMC5168713.

[14] Sarrion-Perdigones A, Vazquez-Vilar M, Palací J, Castelijns B, Forment J, Ziarsolo P, Blanca J, Granell A, Orzaez D. GoldenBraid 2.0: a comprehensive DNA assembly framework for plant synthetic biology. Plant Physiol. 2013 Jul;162(3):1618-31. doi: 10.1104/pp.113.217661. PMID: 23669743; PMCID: PMC3707536.

[15] Martínez-García, E., Goñi-Moreno, A., Bartley, B., McLaughlin, J., Sánchez-Sampedro, L., del Pozo, H. P., Hernández, C. P., Marletta, A. S., De Lucrezia, D., Sánchez-Fernández, G., Fraile, S., & de Lorenzo, V. (2020). SEVA 3.0: an update of the Standard European Vector Architecture for enabling portability of genetic constructs among diverse bacterial hosts. In Nucleic Acids Research (Vol. 48, Issue 6, pp. 3395–3395). Oxford University Press (OUP). https://doi.org/10.1093/nar/gkaa114

[16] Carbonelli, D. L., Corley, E., Seigelchifer, M., & ZorzÃ³pulos, J. (1999). A plasmid vector for isolation of strong promoters inEscherichia coli. In FEMS Microbiology Letters (Vol. 177, Issue 1, pp. 75–82). Oxford University Press (OUP). https://doi.org/10.1111/j.1574-6968.1999.tb13716.x

Sequence and Features

Assembly Compatibility:

10
COMPATIBLE WITH RFC[10]
12
COMPATIBLE WITH RFC[12]
21
COMPATIBLE WITH RFC[21]
23
COMPATIBLE WITH RFC[23]
25
COMPATIBLE WITH RFC[25]
1000
COMPATIBLE WITH RFC[1000]

Sequence and Features

@@ Line 185: / Line 185: @@
 <figure>
 <img src='https://static.igem.wiki/teams/5299/new-basic/electro3.png' width='300px' height='350px'
-          <figcaption><center><b><small><i>FFigure 9. Diagnostic digestion of the generated Level ω  constructs  by using EcoRV and NotI. (A.)  <i>in silico</i> virtual digestion by GelSim Tool  from SnapGene.  (B.)1 % agarose gel ran at 110 V for 25 min stained with EtBr. The lanes order is as follows:  (1)  pDB3omega, (2) BG37-RBS2-T7pol-Ter + T7pro- RBS2-sfGFP-T7ter, (3) J23119-RBS2-T7pol-Ter + T7pro-RBS2-sfGFP-T7ter
+          <figcaption><center><b><small><i>Figure 9. Diagnostic digestion of the generated Level ω  constructs  by using EcoRV and NotI. (A.)  <i>in silico</i> virtual digestion by GelSim Tool  from SnapGene.  (B.)1 % agarose gel ran at 110 V for 25 min stained with EtBr. The lanes order is as follows:  (1)  pDB3omega, (2) BG37-RBS2-T7pol-Ter + T7pro- RBS2-sfGFP-T7ter, (3) J23119-RBS2-T7pol-Ter + T7pro-RBS2-sfGFP-T7ter
 </i></small></b></center></figcaption>
 </figure></center></html>
@@ Line 330: / Line 330: @@
 </figure></center></html>
-<p>In M9 medium with citrate as a carbon source <i>E. coli</i> DH5α cells with BG37, J23119 and osmY promoters, as well as with only pDGB3a1 vector, appear to grow in a similar way. The exponential phase seems to be between 4-12h time points.</p>
+In M9 medium with citrate as a carbon source <i>E. coli</i> DH5α cells with BG37, J23119 and osmY promoters, as well as with only pDGB3a1 vector, appear to grow in a similar way. The exponential phase seems to be between 4-12h time points.</p>

Difference between revisions of "Part:BBa K5299008"

Revision as of 15:19, 1 October 2024

Overview

The origin of BG37

Our characterization approach

Experimental Design

1st Experiment: Identification of the most suitable promoter for T7 polymerase production

2nd Experiment: Evaluation of T7 polymerase production device

3rd Experiment: Influence of different backbone vectors on BG37 activation

4rd Experiment: Influence of different carbon sources on BG37 activation

5th Experiment: Further characterization of BG37 in our design chassis: P. putidan

Experimental Procedure

Results and discussion

1. Identification of the Most Suitable Promoter for T7 Polymerase Production

2. Evaluation of T7 polymerase production device

3. Influence of different backbone vectors on BG37 activation

Comparison of BG37 promoter’s behavior in pSEVA23g19[g1] and pDGB3a1

4. Influence of different carbon sources on BG37 activation

Comparison of BG37 promoter’s behavior in pSEVA23g19[g1] and pDGB3a1

5. Further characterization of BG37 in our design chassis: P. putida

References P. putida