Difference between revisions of "Part:BBa K4247007"

(Large scale production)
 
(24 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
=== Minispidroin_NT-2rep-CT_N-6His ===
 
=== Minispidroin_NT-2rep-CT_N-6His ===
  
This part codes for the full minispidroin protein, a highly soluble spider silk protein, with a 6x His-tag in the N-terminus. This is a composite part consisting of the following basic parts: BBa_K4247005 (Minispidroin_NT_N-6His), BBa_K4247001 (Minispidroin_2rep) and BBa_K4247002 (Minispidroin_CT). BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain with a 6x His-tag in the N-terminus of the protein.
+
This part codes for the full minispidroin protein, a highly soluble spider silk protein, with a 6x His-tag in the N-terminus. This is a composite part consisting of the following basic parts: <partinfo>BBa_K4247005</partinfo>, <partinfo>BBa_K4247001</partinfo> and <partinfo>BBa_K4247002</partinfo>. BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain with a 6x His-tag in the N-terminus of the protein.
 
   
 
   
This part is one of a collection of compatible minispidroin parts: BBa_K4247000 (Minispidroin_NT), BBa_K4247001 (Minispidroin_2rep), BBa_K4247002 (Minispidroin_CT), BBa_K4247004 (Minispidroin_NT-2rep-CT), BBa_K247005 (Minispidroin_NT_N-6His), BBa_K247007 (Minispidroin_NT-2rep-CT_N-6His), BBa_K247010 (Minispidroin_NT-2rep-CT-SnoopTag_N-6His), BBa_K247011 (Minispidroin_NT-4rep-CT), BBa_K247012 (Minispidroin_NT-4rep-CT_N-6His), BBa_K247013 (Minispidroin_NT-4rep-CT-SnoopTag_N-6His).
+
This part is one of a collection of compatible minispidroin parts: <partinfo>BBa_K4247000</partinfo> (Minispidroin_NT), <partinfo>BBa_K4247001</partinfo> (Minispidroin_2rep), <partinfo>BBa_K4247002</partinfo> (Minispidroin_CT), <partinfo>BBa_K4247004</partinfo> (Minispidroin_NT-2rep-CT), <partinfo>BBa_K4247005</partinfo> (Minispidroin_NT_N-6His), <partinfo>BBa_K4247007</partinfo> (Minispidroin_NT-2rep-CT_N-6His), <partinfo>BBa_K4247010</partinfo> (Minispidroin_NT-2rep-CT-SnoopTag_N-6His), <partinfo>BBa_K4247011</partinfo> (Minispidroin_NT-4rep-CT), <partinfo>BBa_K4247012</partinfo> (Minispidroin_NT-4rep-CT_N-6His), <partinfo>BBa_K4247013</partinfo> (Minispidroin_NT-4rep-CT-SnoopTag_N-6His).
 
+
 
+
[[File:MiniSpN.jpeg|200px|]]
+
  
 
== Usage and Biology ==
 
== Usage and Biology ==
Line 18: Line 15:
 
This clearly shows us that the solubility and pH sensitivity have a huge effect on the N- and C-terminus of the spidroin which thus affects the formation of fibers. It has been found that the N-terminus of MaSp1 (Major ampullate spidroin 1) from Euprosthenops australis, shows extremely high solubility and pH sensitivity whereas the C-terminus has low solubility and is inert to pH changes and vice versa for the MiSp (Minor ampullate spidroin) of Araneus ventricosus.
 
This clearly shows us that the solubility and pH sensitivity have a huge effect on the N- and C-terminus of the spidroin which thus affects the formation of fibers. It has been found that the N-terminus of MaSp1 (Major ampullate spidroin 1) from Euprosthenops australis, shows extremely high solubility and pH sensitivity whereas the C-terminus has low solubility and is inert to pH changes and vice versa for the MiSp (Minor ampullate spidroin) of Araneus ventricosus.
  
Herein, part BBa_K4247007 is a composite part formed from the following basic parts: BBa_K4247005 (Minispidroin_NT_N-6His), BBa_K4247001 (Minispidroin_2rep) and BBa_K4247002 (Minispidroin_CT). BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain and a 6x His-tag in the N-terminus.
+
[[File:2repspin.jpeg]]
 +
Andersson et al., 2017 show how minispidroin can be spun into long fibers
  
 +
Herein, part BBa_K4247007 is a composite part formed from the following basic parts: <partinfo>BBa_K4247005</partinfo> (Minispidroin_NT_N-6His), <partinfo>BBa_K4247001</partinfo> (Minispidroin_2rep) and <partinfo>BBa_K4247002</partinfo> (Minispidroin_CT). BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain and a 6x His-tag in the N-terminus.
  
 
== Characterization ==
 
== Characterization ==
Line 151: Line 150:
 
'''Results - '''Mini columns were loaded with Ni-NTA resin and the soluble fraction of the lysate was added to the columns. Then, the columns were washed twice and eluted to obtain the purified protein. An SDS-gel was run on the different purification fractions and it is clear that most of the protein was lost in the flowthrough and washes and almost nothing was eluted. This shows that the proteins did not bind to the Ni-NTA column at all.
 
'''Results - '''Mini columns were loaded with Ni-NTA resin and the soluble fraction of the lysate was added to the columns. Then, the columns were washed twice and eluted to obtain the purified protein. An SDS-gel was run on the different purification fractions and it is clear that most of the protein was lost in the flowthrough and washes and almost nothing was eluted. This shows that the proteins did not bind to the Ni-NTA column at all.
  
 +
Lysis buffer - 20mM Tris-Cl, pH 8.0
 +
 +
Wash buffer - 20mM Tris-Cl, 5mM Imidazole, pH 8.0
 +
 +
Elution buffer - 20mM Tris-Cl, 200mM Imidazole, pH 8.0
 +
 +
Dialysis buffer - 20mM Tris-Cl, pH 8.0
  
 
[[File:Protein purification by IMAC.png]]
 
[[File:Protein purification by IMAC.png]]
Line 163: Line 169:
  
 
'''Conclusion - '''So, with a sufficient incubation time (30-60mins) that allows the Ni-NTA resin to bind all the proteins, it is possible to elute the proteins with very high purity.
 
'''Conclusion - '''So, with a sufficient incubation time (30-60mins) that allows the Ni-NTA resin to bind all the proteins, it is possible to elute the proteins with very high purity.
 
  
 
=== A quicker approach to protein purification by IMAC ===
 
=== A quicker approach to protein purification by IMAC ===
Line 201: Line 206:
  
  
'''Results - '''In order to obtain large amounts of the protein for spinning the fibre, the proteins were produced in large scale by cultivating the cells in a 1L fermenter. The cells were grown in 1L of batch media at 37°C to an OD600 of 77 which takes about 20h. Then, when the cells have consumed all the media, there is a spike in the oxygen saturation levels due to depletion of glucose. At this point, the cells are induced with 250uM IPTG and fed-batch (500ml) mode is started. Then, after 20h of induction, the cells are cultivated. An SDS-gel was done on cells before and after induction.
+
'''Composition of Batch and Fed-batch media'''
  
Fermentation data:
+
Instead of LB media, we used a complex growth medium that integrated a specific trace metal solution. The authors obtained this media from experiment #4 (see below) of another paper: A.J. da Silva, A.C.L. Horta, A.M. Velez, M.R.C. Iemma, C.R. Sargo, R.L.C. Giordano, M.T.M. Novo, R.C. Giordano, T.C. Zangirolami, Springerplus 2 (2013) 1–12.
Settings fermentor from https://doi.org/10.1016/j.mattod.2021.07.020
+
  
pO2=30%
+
[[File:bronze1.png|900px]]
T= 37 C growth -> 20 C after induction at around 21h
+
pH= 7
+
rpm= 420-1100
+
total duration= 40h
+
  
[[File:Ferm 2rep.jpeg]]
+
For our bioreactor, we always started cultures with 1 L of batch media and set the system such that 500 mL of fed-batch media would enter the system at a specific rate and we used Silica antifoam.  
  
For 1L of batch media:
+
The feeding rate should follow the formula:
Glucose - 14ml of 700g/L stock to achieve 10g/L
+
MgSO4 - 2.04ml of 245g/L stock to achieve 0.5g/L
+
Kanamycin - 2ml of 50mg/ml stock to achieve 100mg/L
+
Metal - 40ml (1:25)
+
  
For 1L of fed-batch media:
+
[[File:bronze2.png]]
MgSO4 - 16ml of 245g/L stock to achieve 40g/L
+
Kanamycin - 2ml of 50mg/ml stock to achieve 100mg/L
+
Metal - 40ml (1:25)
+
  
Metal solutions:
+
wherein,
[[File: Metal solution composition.jpeg]]
+
  
 +
F - the rate of feeding (l h-1 )
 +
 +
S - concentration of the glycerol in the feed (g l-1 )
 +
 +
µ - specific growth rate (h-1)
 +
 +
YX/S - biomass yield on the substrate (g g-1 )
 +
 +
m - specific maintenance coefficient (g g-1 h -1 )
 +
 +
X - biomass concentration (g l-1 )
 +
 +
For the fermentation of this minispidroin protein, the authors set µ to 0.1, m to 0.025, and YX/S to 0.622.
 +
 +
'''Composition of Metal solution'''
 +
 +
Both batch and fed-batch media have to be complemented with two different metal solutions, as shown in the table below.
 +
 +
[[File:bronze3.png|900px]]
 +
 +
 +
'''Parameters for the Fermentation cycle'''
 +
 +
Our fermentation strategy worked in every protein production cycle, but we had to slightly modify the timings.
 +
Original parameters:
 +
[[File:bronze4.png]]
 +
 +
Our production cycle (40h):
 +
 +
[[File:Ferm 2r.jpeg]]
 +
 +
 +
'''Results - '''In order to obtain large amounts of the protein for spinning the fibre, the proteins were produced in large scale by cultivating the cells in a 1L fermenter. The cells were grown in 1L of batch media at 37°C to an OD600 of 77 which takes about 20h. Then, when the cells have consumed all the media, there is a spike in the oxygen saturation levels due to depletion of glucose. At this point, the cells are induced with 250uM IPTG and fed-batch (500ml) mode is started. Then, after 20h of induction, the cells are cultivated. An SDS-gel was done on cells before and after induction.
  
  
Line 275: Line 300:
  
 
=== Protein yields ===
 
=== Protein yields ===
 +
 +
'''Aim - '''To do a BCA assay after dialysis of the protein to quantify the final yield.
 +
 +
 +
'''Results -'''
 +
 +
Minispidroin_NT-2rep-CT_N-6His was inoculated in LB, grown at 37°C, induced with 0.3mM IPTG and allowed to express the protein ON in a flask. The cells were lysed, the proteins purified by IMAC and dialysed ON. Then, a BCA assay was done to estimate the protein yields.
 +
 +
[[File:2rep4repbca.png]]
 +
 +
 +
'''Conclusion - '''The yield of Minispidroin_NT-2rep-CT_N-6His was found to be 44.27 mg/L of culture.
 +
 +
=== Comparison of protein production with respect to His-tag location ===
 +
 +
 +
'''Aim - '''To compare the protein production of the Minispidroin_NT-2rep_CT when the 6x His-tag was at the N-terminus or the C-terminus.
 +
 +
 +
'''Results - '''Cells expressing minispidroin proteins with a His-tag in the N-terminus or C-terminus were grown to an OD600 of 0.1 and induced with 0.3mM IPTG to induce protein expression. Then, the cells were grown at 28°C post-induction ON. Then, the cells were lysed and the proteins were purified by IMAC. Further, the different purification fractions were run on an SDS-gel to compare the amount of proteins eluted.
 +
 +
[[File:2repbca.png]]
 +
 +
Further, a BCA assay was done on the purified proteins to quantify the yields.
 +
 +
[[File:4rep2repbca.png]]
 +
 +
 +
'''Conclusion - '''It is very evident that switching the His-tag from the C-terminus to N-terminus increased the protein production of the Minispidroin protein substantially, by nearly 8 times.
 +
 +
===Simulating the assembly mechanism silk fiber networks===
 +
We simulated the formation of a spider silk fiber network during spinning and stretching of the silk fiber using dissipative particle dynamics. This was done on a different number of the characteristic hydrophobic alanine-repeat motif. The data from these simulations was then analysed by identifying clusters of the hydrophobic parts of the repeats and generalising them into nodes (red dots), and links between nodes was then indicated in bridges (black lines), where their thickness indicates the number of connections.
 +
 +
[[File:Figures Joachim.png|400px]]
 +
 +
The simulation results indicate that spider silk proteins with 3 and 4 repeats seem to form the most stable fiber networks with large average beta sheet crystals and many connecting bridges, although our simulations were limited because we did not get a chance to simulate proteins with a larger number of repeats than 6.
 +
 +
[[File: Fig1A.png|400px]]
 +
 +
[[File: Fig1b.png|400px]]
 +
 +
Fig: Graph depicting the development of average beta-sheet crystals size and number of bridges for networks of spider silk proteins with different number of repeats. The average beta-sheet crystals size is measure in the number of hydrophibic beads that are included in beta-sheets, where each bead represent 3 hydrophobic amino acid residues.
 +
 +
Additionally we simulated spinning under the conditions of failed spinning attempts to try and troubleshoot and fix our mistakes for future attempts. We observed that the failed spinning case that we examined with a protein concentration of 15% had a lowered size of its average beta sheet crystals as well as a low connectivity. Through an additional simulation, with raised shear rate, which represents a higher shear force in spinning, accomplished by a narrower needle, it was observed that a raised shear rate could counteract the lowered average size of beta sheet crystals, but not the network connectivity.
 +
 +
[[File: Fig2a.png|400px]]
 +
 +
[[File: 2b.png|400px]]
 +
 +
Fig: Graph depicting the development of average beta-sheet crystals size and number of bridges for networks of spider silk proteins with different number of repeats, at different concentrations of spinning, and with different shear rates, which indicate how much shear force is applied to the proteins during spinning (lack of specific shear rate indicates a shear rate of 0.1). The average beta-sheet crystals size is measure in the number of hydrophibic beads that are included in beta-sheets, where each bead represent 3 hydrophobic amino acid residues.

Latest revision as of 15:36, 12 October 2022

Minispidroin_NT-2rep-CT_N-6His

This part codes for the full minispidroin protein, a highly soluble spider silk protein, with a 6x His-tag in the N-terminus. This is a composite part consisting of the following basic parts: BBa_K4247005, BBa_K4247001 and BBa_K4247002. BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain with a 6x His-tag in the N-terminus of the protein.

This part is one of a collection of compatible minispidroin parts: BBa_K4247000 (Minispidroin_NT), BBa_K4247001 (Minispidroin_2rep), BBa_K4247002 (Minispidroin_CT), BBa_K4247004 (Minispidroin_NT-2rep-CT), BBa_K4247005 (Minispidroin_NT_N-6His), BBa_K4247007 (Minispidroin_NT-2rep-CT_N-6His), BBa_K4247010 (Minispidroin_NT-2rep-CT-SnoopTag_N-6His), BBa_K4247011 (Minispidroin_NT-4rep-CT), BBa_K4247012 (Minispidroin_NT-4rep-CT_N-6His), BBa_K4247013 (Minispidroin_NT-4rep-CT-SnoopTag_N-6His).

Usage and Biology

Dragline silk produced by spiders is one of the strongest natural materials to exist and it is mainly made up of structural proteins called spidroins. These spidroins consist of non-repetitive N-terminal and C-terminal domains and a repetitive central part consisting of tandem repeats of a certain amino acid sequence. These sequences are rich in alanine and glycine to form the crystalline and amorphous parts of the fibre respectively.

There are many research articles whose authors could successfully produce recombinant spider silk proteins and spin them into fibres by mimicking the conditions of the spider’s silk gland where the fibers are formed naturally. But a major drawback in many of these recombinant spidroins was their low solubility. It has been found that the N-terminus of the spidroin is highly soluble at neutral pH which contributes to the solubility of the protein.

In the spider's silk gland, before spinning, the spidroins remain in a highly concentrated and soluble state. Then, this highly concentrated spidroin solution called spinning dope is subject to a gradual drop in pH from 7.6 to 5.7 along the gland which triggers the formation of the fiber. This drop in pH triggers the N-terminus to be more stable and form large network-like structures whereas the C-terminus becomes more unstable to drive spontaneous fibre formation by forming the beta-sheet fibrils which form the core of the fiber. The N-terminal domain restricts the formation of silk fibers to a precise point in the silk duct, preventing silk proteins stored in the silk gland from agglutinating.

This clearly shows us that the solubility and pH sensitivity have a huge effect on the N- and C-terminus of the spidroin which thus affects the formation of fibers. It has been found that the N-terminus of MaSp1 (Major ampullate spidroin 1) from Euprosthenops australis, shows extremely high solubility and pH sensitivity whereas the C-terminus has low solubility and is inert to pH changes and vice versa for the MiSp (Minor ampullate spidroin) of Araneus ventricosus.

2repspin.jpeg Andersson et al., 2017 show how minispidroin can be spun into long fibers

Herein, part BBa_K4247007 is a composite part formed from the following basic parts: BBa_K4247005 (Minispidroin_NT_N-6His), BBa_K4247001 (Minispidroin_2rep) and BBa_K4247002 (Minispidroin_CT). BBa_K4247007 contains the coding sequence for the full minispidroin protein with 2 repeats of the central repetitive domain and a 6x His-tag in the N-terminus.

Characterization

Optimization of inducer concentration

Aim - To determine the concentration of inducer required for optimal protein expression.


Results - Cell cultures were grown ON at 37°C. Then, the next day, the cultures were diluted to an OD600 of 0.1 and induced with 0.1, 0.3, 0.5 and 1mM IPTG and grew ON. We can clearly see that around 30kDa, there is a darker band in the induced lanes compared to the uninduced lane, showing that the protein is expressed upon induction with IPTG. Further, among the induced lanes, protein expression is maximum when the cultures were induced with 0.3mM IPTG.


Optimization of inducer concentration.png


Further, a western blot was done on the above SDS-gel to confirm that the proteins we see are indeed the minispidroin proteins. Since the proteins were expressed with a 6x His-tag, we used mouse anti-hexa his primary antibodies and goat anti-mouse HRP-conjugated secondary antibodies for the western blot. Once again, it is clear that 0.3mM IPTG is the optimal inducer concentration.


Optimization of inducer concentration - Wblot.png


Conclusion - So, it is clear that 0.3mM IPTG is the optimal concentration for protein expression. This is further backed up by the results of the minispidroin literature since the authors found 0.3mM IPTG to the optimal concentration too.


Optimization of temperature after induction

Aim - To determine the optimal temperature for growing the cells post-induction.


Results - The cultures were grown ON at 37°C. Then, the next day, the cultures were diluted to an OD600 of 0.1 and induced with 0.3mM IPTG and grew ON at 3 different temperatures - 20, 28 and 37°C. Similarly, uninduced controls were grown in identical conditions. The cells either have the 6x His-tag in the N-terminus or the C-terminus.


Optimization of temperature after induction.png


Conclusion - It can be seen that at all temperatures, the induced cells produce the proteins whereas the uninduced controls don’t and among the induced cultures, protein expression is highest when the cells are incubated at 28°C post-induction. Further, it is clear that more protein is expressed when the 6x His-tag is in N-terminus rather than the C-terminus of the protein.


Optimization of lysis buffer

Aim - To determine the best buffer for cell lysis that provides most of the protein in a soluble state.


Results - In order to lyse our cells by sonication, we used 2 different lysis buffers to decide which lysis buffer gave the most proteins in the soluble fraction. The recipes of the buffers are as follows, Buffer 1: 50 mM NaH2PO4 + 500 mM sodium chloride + 10 mM imidazole + 0.5% Triton X-100 + 10% glycerol + 2 mM DTT (added fresh, right before use), pH 8.0 Buffer 2: 20mM Tris-Cl, pH 8.0

The cell cultures were centrifuged to obtain the cell pellets which were resuspended in the cell lysis buffer and then sonicated until a clear lysate was obtained. The lysate was centrifuged to obtain the insoluble and soluble fractions in the pellet and supernatant respectively. In the SDS-gel, we can clearly see that most of the protein is in the soluble fraction for both the buffers. Further, it is also clear that we obtain more of the protein in the soluble fraction with buffer 2 which is also the buffer used in the minispidroin literature.


Optimization of lysis buffer.png


Further, a western blot was done on the above SDS-gel to confirm that the proteins we see are indeed the minispidroin proteins using the above mentioned antibodies. Once again, it is clear that most of the protein is obtained in the soluble fraction with buffer 2.


Optimization of lysis buffer - Wblot.png


Conclusion - From the SDS-gel and western blot, we can conclude that buffer 2 is better than buffer 1 since it provides most of the protein in the soluble fraction. This is further backed up by the results of the minispidroin literature since the authors used buffer 2 as well.


Heat purification

Aim - To determine if there is a temperature that would precipitate only the minispidroin proteins without the other E.coli proteins, to facilitate an easy purification method using heat treatment.


Results - The soluble fraction of the lysate was subject to different temperatures (37, 40, 45, 50, 60°C). Then, after heat treatment, the samples were centrifuged and the supernatants and pellets obtained after different temperatures were run on an SDS-gel. It is clear that minispidroin-NT_2rep_CT remains soluble upto 50°C since most of it is found in the supernatant and not the pellet. At 50 and 60°C, most of the protein is found in the pellet showing that it precipitates at temperatures above 50°C. However, a lot of other proteins also precipitate at those temperatures, so it is not possible to obtain the pure protein.


Heat purification.png


To test if higher temperatures would yield puree proteins, the lysate was subject to 70 and 80°C. It is clear that most of the protein precipitates at 70 and 80°C but like before, it is not very pure since a lot of other proteins are also precipitating.


Heat purification 2.png


Further, a western blot was done on the above SDS-gel to confirm that the proteins we see are indeed the minispidroin proteins using the above mentioned antibodies. Once again, it is clear that most of the protein precipitates at 70 and 80°C.


Heat purification 3.png


Conclusion - So, although most of the protein precipitates at temperatures above 50°C, heat treatment is not a suitable method for protein purification since there is no temperature that precipitates minispidroin without also precipitating other proteins.


pH purification

Aim - To determine if there is a certain pH at which minispidroin_NT-2rep-CT precipitates without the other E.coli proteins, to facilitate an easy purification method using changes in pH.


Results - The soluble fraction of the lysate was adjusted to different pH (5.5, 6, 6.5, 7, 7.5) and incubated for 1h at room temperature. Then, the samples were centrifuged and the supernatants and pellets obtained at different pH values were run on an SDS-gel. It is clear that minispidroin_NT-2rep-CT does not precipitate at any pH since the lanes with pellets do not have any bands around 30kDa.


PH purification.png


Conclusion - Since there is no pH value at which the protein precipitates, the method of adjusting the pH cannot be used for purification.


Optimization of media

Aim - To determine which media, LB (Luria broth) or TB (Terrific broth) is better for protein expression.


Results - The cells were inoculated in either LB or TB media and grown ON at 37°C in identical conditions. The cultures were induced with 0.3mM IPTG and allowed to express the protein ON.


Optimization of media.png


Conclusion - It is clear that more of the protein is expressed when the cells are grown in LB rather than TB.


Protein purification by IMAC

Aim - To purify the protein by IMAC (immobilized metal ion chromatography) using Ni-NTA resin.


Results - Mini columns were loaded with Ni-NTA resin and the soluble fraction of the lysate was added to the columns. Then, the columns were washed twice and eluted to obtain the purified protein. An SDS-gel was run on the different purification fractions and it is clear that most of the protein was lost in the flowthrough and washes and almost nothing was eluted. This shows that the proteins did not bind to the Ni-NTA column at all.

Lysis buffer - 20mM Tris-Cl, pH 8.0

Wash buffer - 20mM Tris-Cl, 5mM Imidazole, pH 8.0

Elution buffer - 20mM Tris-Cl, 200mM Imidazole, pH 8.0

Dialysis buffer - 20mM Tris-Cl, pH 8.0

Protein purification by IMAC.png


Since most of the protein was lost in the flowthrough and washes in the previous attempt, the soluble fraction containing the proteins was allowed to incubate with the Ni-NTA resin under shaking conditions for 30-60 mins. This would provide sufficient time for the resin to bind the protein. Then, the columns were washed twice and eluted to obtain the purified protein. An SDS-gel was run on the different purification fractions and it is clear that most of the protein is obtained in the eluate and none of it is lost in the flowthrough or washes. Further, the purity of the obtained protein is high since there are no other bands.


Protein purification by IMAC 2.png


Conclusion - So, with a sufficient incubation time (30-60mins) that allows the Ni-NTA resin to bind all the proteins, it is possible to elute the proteins with very high purity.

A quicker approach to protein purification by IMAC

Aim - To purify the protein by IMAC (immobilized metal ion chromatography) using Ni-NTA resin in a quicker way.


Results - Ni-NTA resin was added to the soluble fraction of the lysate and allowed to incubate for 1h under shaking conditions. Then, it was centrifuged to collect the resin with the proteins and the supernatant was collected as flowthrough. Then, the resin was washed twice and eluted 5 times.


Protein purification by IMAC 3.png


Conclusion - It can be seen that most of the protein is collected in the first elution without much being lost in the flowthrough or the washes.


Stripping the Ni-NTA columns with urea

Aim - To wash the Ni-NTA columns with urea and strip them with EDTA after elution to determine if there was some aggregated protein in the resin or if there were any other metal binding proteins stuck to the column.


Results - After washes and elution, the column was washed with 8M urea. Any aggregated protein that is clumping the column would be solubilized in the urea and hence removed from the column. Then, the column was stripped using EDTA since EDTA can chelate metal ions and hence remove all the Ni and anything bound to it like metal binding proteins. We can see that while some of the protein is lost in the first wash, most of it is in the first elution. Further, a small amount of protein is also seen in the second elution and the urea wash and an even smaller amount after stripping the columns.


Stripping of the columns with urea.png


Conclusion - Although a small amount of protein is lost in the wash or stuck to the column, most of the protein is obtained in the first elution.


Large scale production

Aim - To carry out large scale protein production by fed-batch fermentation.


Composition of Batch and Fed-batch media

Instead of LB media, we used a complex growth medium that integrated a specific trace metal solution. The authors obtained this media from experiment #4 (see below) of another paper: A.J. da Silva, A.C.L. Horta, A.M. Velez, M.R.C. Iemma, C.R. Sargo, R.L.C. Giordano, M.T.M. Novo, R.C. Giordano, T.C. Zangirolami, Springerplus 2 (2013) 1–12.

Bronze1.png

For our bioreactor, we always started cultures with 1 L of batch media and set the system such that 500 mL of fed-batch media would enter the system at a specific rate and we used Silica antifoam.

The feeding rate should follow the formula:

Bronze2.png

wherein,

F - the rate of feeding (l h-1 )

S - concentration of the glycerol in the feed (g l-1 )

µ - specific growth rate (h-1)

YX/S - biomass yield on the substrate (g g-1 )

m - specific maintenance coefficient (g g-1 h -1 )

X - biomass concentration (g l-1 )

For the fermentation of this minispidroin protein, the authors set µ to 0.1, m to 0.025, and YX/S to 0.622.

Composition of Metal solution

Both batch and fed-batch media have to be complemented with two different metal solutions, as shown in the table below.

Bronze3.png


Parameters for the Fermentation cycle

Our fermentation strategy worked in every protein production cycle, but we had to slightly modify the timings. Original parameters: Bronze4.png

Our production cycle (40h):

Ferm 2r.jpeg


Results - In order to obtain large amounts of the protein for spinning the fibre, the proteins were produced in large scale by cultivating the cells in a 1L fermenter. The cells were grown in 1L of batch media at 37°C to an OD600 of 77 which takes about 20h. Then, when the cells have consumed all the media, there is a spike in the oxygen saturation levels due to depletion of glucose. At this point, the cells are induced with 250uM IPTG and fed-batch (500ml) mode is started. Then, after 20h of induction, the cells are cultivated. An SDS-gel was done on cells before and after induction.


Fermentation of minispidroin-2rep.png


Then, the cells were lysed and the proteins were purified by IMAC using Ni-NTA resin. Although the purity is not very high as seen by a few other bands in the eluate lane, most of the protein is found in the eluate.


Fermentation of minispidroin-2rep 2.png


Conclusion - We can see that post-induction, the protein is produced by the cells in the fermenter. Further, purification by Ni-NTA chromatography was successful since a large band can be seen for the protein in the eluate showing that protein production has been increased.

Spinning

Aim - To spin the obtained purified proteins into a fibre.


Results - The purified proteins were dialyzed in a 10kDa cutoff membrane overnight against 20mM Tris-Cl, pH 8.0 to remove all the imidazole. Then, the dialyzed proteins were freeze dried to powder.


Minispidroin-2rep powder.png


The powdered proteins were diluted to 30% w/v with 20mM Tris-Cl, pH 8.0. This concentrated spinning dope was used for spinning the fibre into a coagulation bath - 500 mM sodium acetate buffer, 200 mM NaCl, pH 5. It was extremely difficult to solubilise the powdered proteins and when we tried to spin the dope, the proteins just formed clumps in the coagulation bath as soon as they left the spinning setup.


Spinning 1.png


Since it was extremely difficult to solubilize the powder at 30% w/v, we tried to solubilize the proteins at 15% w/v. This time, it was much easier to solubilize the protein in the buffer. However, when we tried to spin the fibre, the proteins formed clumps in the coagulation bath again and there was no fibre.


Spinning 2.png


Since solubilizing the powdered proteins was difficult, we decided to concentrate the dialyzed proteins directly without freeze drying. We used Amicon 15 centrifugal filter units to concentrate the proteins into a highly concentrated, viscous spinning dope (~30% w/v). The spinning dope was spun into the same coagulation bath using the same spinning setup. As soon as the proteins hit the coagulation bath, they formed long fibres.


Spinning 3.png Spinning 4.png Spinning 5.png Spinning 6.png


Conclusion - Hence, not only was it difficult to solubilize the freeze dried proteins but it was also not possible to spin the fibres from them whereas the proteins that were concentrated without freeze drying could be spun into long fibres.


Protein yields

Aim - To do a BCA assay after dialysis of the protein to quantify the final yield.


Results -

Minispidroin_NT-2rep-CT_N-6His was inoculated in LB, grown at 37°C, induced with 0.3mM IPTG and allowed to express the protein ON in a flask. The cells were lysed, the proteins purified by IMAC and dialysed ON. Then, a BCA assay was done to estimate the protein yields.

2rep4repbca.png


Conclusion - The yield of Minispidroin_NT-2rep-CT_N-6His was found to be 44.27 mg/L of culture.

Comparison of protein production with respect to His-tag location

Aim - To compare the protein production of the Minispidroin_NT-2rep_CT when the 6x His-tag was at the N-terminus or the C-terminus.


Results - Cells expressing minispidroin proteins with a His-tag in the N-terminus or C-terminus were grown to an OD600 of 0.1 and induced with 0.3mM IPTG to induce protein expression. Then, the cells were grown at 28°C post-induction ON. Then, the cells were lysed and the proteins were purified by IMAC. Further, the different purification fractions were run on an SDS-gel to compare the amount of proteins eluted.

2repbca.png

Further, a BCA assay was done on the purified proteins to quantify the yields.

4rep2repbca.png


Conclusion - It is very evident that switching the His-tag from the C-terminus to N-terminus increased the protein production of the Minispidroin protein substantially, by nearly 8 times.

Simulating the assembly mechanism silk fiber networks

We simulated the formation of a spider silk fiber network during spinning and stretching of the silk fiber using dissipative particle dynamics. This was done on a different number of the characteristic hydrophobic alanine-repeat motif. The data from these simulations was then analysed by identifying clusters of the hydrophobic parts of the repeats and generalising them into nodes (red dots), and links between nodes was then indicated in bridges (black lines), where their thickness indicates the number of connections.

Figures Joachim.png

The simulation results indicate that spider silk proteins with 3 and 4 repeats seem to form the most stable fiber networks with large average beta sheet crystals and many connecting bridges, although our simulations were limited because we did not get a chance to simulate proteins with a larger number of repeats than 6.

Fig1A.png

Fig1b.png

Fig: Graph depicting the development of average beta-sheet crystals size and number of bridges for networks of spider silk proteins with different number of repeats. The average beta-sheet crystals size is measure in the number of hydrophibic beads that are included in beta-sheets, where each bead represent 3 hydrophobic amino acid residues.

Additionally we simulated spinning under the conditions of failed spinning attempts to try and troubleshoot and fix our mistakes for future attempts. We observed that the failed spinning case that we examined with a protein concentration of 15% had a lowered size of its average beta sheet crystals as well as a low connectivity. Through an additional simulation, with raised shear rate, which represents a higher shear force in spinning, accomplished by a narrower needle, it was observed that a raised shear rate could counteract the lowered average size of beta sheet crystals, but not the network connectivity.

Fig2a.png

2b.png

Fig: Graph depicting the development of average beta-sheet crystals size and number of bridges for networks of spider silk proteins with different number of repeats, at different concentrations of spinning, and with different shear rates, which indicate how much shear force is applied to the proteins during spinning (lack of specific shear rate indicates a shear rate of 0.1). The average beta-sheet crystals size is measure in the number of hydrophibic beads that are included in beta-sheets, where each bead represent 3 hydrophobic amino acid residues.