Difference between revisions of "Part:BBa K2342009"
| (5 intermediate revisions by 2 users not shown) | |||
| Line 8: | Line 8: | ||
Improvement | Improvement | ||
| − | Previously, team iGEM12_Trieste have used the part (BBa_K875009) to express | + | Previously, team iGEM12_Trieste have used the part (BBa_K875009) to express LL-37 in E.coli as a part of sensing mechanism such that bacteria would produce LL-37 to terminate itself when sufficient conditions are met. However, in this form it wasn’t possible to use this part that encodes for antimicrobial peptide against other pathogens unless LL-37 is cloned to pathogen itself. This limits the possible applications of LL-37 as an antimicrobial agent. Therefore, we established a recombinant expression system for production of LL-37 antimicrobial peptide. We have improved the part by adding SUMO fusion tag, Smt3, such that it is first produced in inactive form and hence does not cause toxicity in host during expression. In order to ease the purification following recombinant expression, we further introduced a Histidine tag, His6x tag. In our project we successful expressed LL-37 in E. coli without killing it confirming that Smt3 tag fulfills its role as designed. We further proved that His6x tag facilitates purification of improved part with histidine tag affinity chromatography method. Therefore, we managed to obtain 30 mg of pure LL-37 from 500 ml E.coli culture. Finally, we prove that it is possible to obtain LL-37 peptide alone by cleaving off His6x-Smt3 tag with commercially available and robust enzyme, Ulp1. In our project, LL-37 is used as a positive control for comparison due to its documented antimicrobial activity. |
Here, we demonstrate in detail how we have improved and successfully used the part in our project. | Here, we demonstrate in detail how we have improved and successfully used the part in our project. | ||
| Line 16: | Line 16: | ||
1. Biology and system | 1. Biology and system | ||
| + | |||
2. Small scale Production | 2. Small scale Production | ||
| + | |||
2.1 Cultivations and Induction | 2.1 Cultivations and Induction | ||
| + | |||
2.2 SDS-Page of protein purification | 2.2 SDS-Page of protein purification | ||
| + | |||
3 Large Scale Production (Half liter batch) | 3 Large Scale Production (Half liter batch) | ||
| + | |||
3.1 Cultivations and Induction | 3.1 Cultivations and Induction | ||
| + | |||
3.2 Cell Lysis and Purification | 3.2 Cell Lysis and Purification | ||
| + | |||
3.3 SDS-Page of protein purification | 3.3 SDS-Page of protein purification | ||
| + | |||
4. Concentration process and | 4. Concentration process and | ||
| + | |||
5. Ulp1 enzyme digestion and SDS PAGE | 5. Ulp1 enzyme digestion and SDS PAGE | ||
| + | |||
6. Antimicrobial activity | 6. Antimicrobial activity | ||
| Line 32: | Line 42: | ||
1. Biology and system | 1. Biology and system | ||
| − | This part encodes for human antimicrobial peptide, cathelicidin also known as | + | This part encodes for human antimicrobial peptide, cathelicidin also known as LL-37 (2). This part allows expression of LL-37 antimicrobial peptide in form of a fusion protein accompanied with His6x-Smt3 tag. The construct can be purified using with commercially available and widely used affinity chromatography columns designed for His6x tag. Smt3 is tag is used to keep antimicrobial peptide, LL-37 in inactive form by blocking its adhesion to phospholipid bilayer of the production host due to relatively large size of the tag. One major advantage of the fusion system used is that it facilitated easier detection of the peptide with a conventional method, SDS-PAGE. Also, SUMO tag is beneficial due to its effect on solubility of fusion peptide which significantly eases purification step. After purification, to cleave off His6x-Smt3 tag, Ulp1 enzyme that is known for its robust and specific proteolytic activity against SUMO fusion proteins, is used to obtain free DCD1L antimicrobial peptide (3,4). |
| − | [[File:BBa_K2342009_Figure_1_aaltohelsinki9.jpg| | + | [[File:BBa_K2342009_Figure_1_aaltohelsinki9.jpg|900px|thumb|center|Figure 1. Plasmid map of our composite part (Geneious version (http://www.geneious.com, Kearse et al., 2012))]] |
| Line 43: | Line 53: | ||
| − | The pET28a(+) vector contains a T7lac promoter (TAATACGACTCACTATAGGGGAATTGTGAGCGGATAACAATTC) which consists of the T7 promoter and downstream of that there is the lac operator sequence. In addition, the vector contains the gene lacI, which encodes for the lac repressor (LacI) that binds to the lac operator. This promoter can be induced by isopropyl-β-D-thiogalactopyranoside (IPTG) | + | The pET28a(+) vector (Figure 1) contains a T7lac promoter (TAATACGACTCACTATAGGGGAATTGTGAGCGGATAACAATTC) which consists of the T7 promoter and downstream of that there is the lac operator sequence. In addition, the vector contains the gene lacI, which encodes for the lac repressor (LacI) that binds to the lac operator. This promoter can be induced by isopropyl-β-D-thiogalactopyranoside (IPTG). |
| Line 50: | Line 60: | ||
2.1 Cultivations and Induction of protein expression | 2.1 Cultivations and Induction of protein expression | ||
| − | For small scale production, 3-4 colonies from the transformation plates were inoculated (the expression strain cells | + | For small scale production, 3-4 colonies from the transformation plates were inoculated (the expression strain cells C2566) transformed with plasmids carrying the gene of interest) in 7 ml LB-kanamycin (50 μg/ml working concentration) and grew the cells at +37 °C until it reached the OD600 value ~0,51. When finished growing the cells, the expression of the gene of interest was induced by adding a final concentration of 0,5 mM IPTG in the cultures and continued to grow at +37 °C shaking. Small scale purification was carried out using the Qiagen Ni-NTA spin columns. |
2.2 SDS-Page of protein purification | 2.2 SDS-Page of protein purification | ||
| Line 58: | Line 68: | ||
| − | SDS-PAGE image (Figure 2) shows that after induction of expression with IPTG, the band gets corresponding to gene of interest gets thicker gradually, from initial (well 1) to 4 hours (well 3). It proves that the T7 promoter system works as intended, without promoter leakage. Although, there is a strong band in both lysate (well 4) and pellet (well 5) suggesting that protein of interest was partially precipitated. Soluble portion of the protein seen in lysate | + | SDS-PAGE image (Figure 2) shows that after induction of expression with IPTG, the band gets corresponding to gene of interest gets thicker gradually, from initial (well 1) to 4 hours (well 3). It proves that the T7 promoter system works as intended, without promoter leakage. Although, there is a strong band in both lysate (well 4) and pellet (well 5) suggesting that protein of interest was partially precipitated. Soluble portion of the protein seen in lysate was successfully purified and can be seen in well 7 and 8 |
| − | [[File:BBa_K2342009_Figure_2_aaltohelsinki9.jpg| | + | [[File:BBa_K2342009_Figure_2_aaltohelsinki9.jpg|400px|thumb|center|Figure 2. SDS-Page image from small scale expression of His6x-Smt3-LL37 (17.813 kDa) M- Marker (PageRuler™ Prestained Protein Ladder, Thermo Fisher) 1. Non-induced, 2. 2 hours of induction, 3. 4 hours of induction, 4. Lysate, 5. Pellet, 6. Flow through, 7. Eluate 1, 8. Eluate 2]] |
| Line 78: | Line 88: | ||
| − | [[File: | + | [[File:BBa_K2342007_Figure_3_aaltohelsinki9.jpg|600px|thumb|center|Figure 3. Sample Image of the plate with all the eluates from the Akta machine after purification.]] |
| Line 86: | Line 96: | ||
| − | + | The wells (D1, A2, B2…….. A5) were selected from the eluate plate based on the peaks from the graph similar to one shown in (Figure 4) and analysed by running SDS PAGE for desired protein. | |
| − | The wells (D1, A2, B2…….. A5) were selected from the eluate plate based on the peaks from the graph similar to one shown in (Figure | + | |
3.3 SDS-Page of protein purification | 3.3 SDS-Page of protein purification | ||
| − | The molecular weight of 6xHis-Smt3-LL-37 is 18.2kDa. After running the selected fractions on the gel, it could be seen that eluates D2, A3, B3, C3 had our desired protein. Hence these were collected for further protein concentration and buffer exchange step and rest eluates were discarded. | + | The molecular weight of 6xHis-Smt3-LL-37 is 18.2kDa. After running the selected fractions on the gel (Figure 5), it could be seen that eluates D2, A3, B3, C3 had our desired protein. Hence these were collected for further protein concentration and buffer exchange step and rest eluates were discarded. |
| Line 107: | Line 116: | ||
5. Ulp1 enzyme digestion and SDS PAGE | 5. Ulp1 enzyme digestion and SDS PAGE | ||
| − | For digesting | + | For digesting His6x-Smt3-containing LL-37 with Ulp1 to obtain free LL-37, 0.5μL of Ulp1 protease was added to 50μL of the purified protein (concentrated in e.g. NaPi buffer). The suitable digestion time was determined by incubating the protein with Ulp1 for different time points and running them on an SDS-PAGE. We can see that 10 mins of Incubation at RT is enough. |
| − | [[File: | + | [[File:BBa_K2342009_Figure6_aaltohelsinki9.jpg|400px|thumb|center|Figure 6. Digestion of His6x-Smt3-LL-37 with Ulp1. Samples on the gel are- 1. Ulp1 (control), 2. His6x-Smt3-DCD-1L (undigested), 3. His6x-Smt3-DCD-1L + Ulp1 (digested for 0 minutes), 4. His6x-Smt3-DCD-1L + Ulp1 (digested for 5 minutes), 5. His6x-Smt3-DCD-1L + Ulp1 (digested for 30 minutes), 6. His6x-Smt3-LL37 + Ulp1 (digested for 0 minutes), 7. His6x-Smt3-LL37 + Ulp1 (digested for 5 minutes), 8. His6x-Smt3-LL37 + Ulp1 (digested for 30 minutes).]] |
| − | 1. Ulp1 (control), 2. | + | |
| − | Undigested samples are highlighted with a white box: | + | Undigested samples are highlighted with a white box: His6x-Smt3-LL-37 18.2kDa. The LL-37 peptide (4.71kDa after digestion) are very low, it is challenging to observe the corresponding bands on the SDS-PAGE gel. Instead, the band corresponding to the His6x-Smt3 part can be clearly observed from the gel (Red Box). The image further illustrates that the activity of Ulp1 is very high, because directly after mixing the protein sample with Ulp1 (0 minutes digested), the digested His6x-Smt3 tag can be clearly distinguished from the undigested protein. |
6. Antimicrobial activity Activity | 6. Antimicrobial activity Activity | ||
| − | Bacterial cultures were grown until the OD reached 0.05 with corresponding 1.4*10^8 CFU/ml. The samples were incubated at 37°C, shaking for 40 mins with the respective antimicrobial peptides Nisin, | + | Bacterial cultures were grown until the OD reached 0.05 with corresponding 1.4*10^8 CFU/ml. The samples were incubated at 37°C, shaking for 40 mins with the respective antimicrobial peptides Nisin, DCD-1L and LL-37 (concentration used: 100 ug/ml). After incubation, the OD of the cells were measured. It was observed that the OD values in all the three samples with LL-37, Nisin and produced DCD-1L dropped after 40 minutes indicating antimicrobial property of the peptides. |
[[File:BBa_K2342009_Figure_7_aaltohelsinki9.png|600px|thumb|center|Figure 7. % of cells killed when incubated with LL-37 and other peptides with respect to time.]] | [[File:BBa_K2342009_Figure_7_aaltohelsinki9.png|600px|thumb|center|Figure 7. % of cells killed when incubated with LL-37 and other peptides with respect to time.]] | ||
Latest revision as of 21:55, 31 October 2017
LL-37 peptide linked to sumo fusion peptide with Hisx6
This part comprises of a peptide LL-37. For the efficient production and purification system, it is combined with a SUMO fusion protein Smt3 and his tag. Using this part it is possible to produce the LL-37 in E.coli without killing the host bacteria. This can then be purified using his tag affinity chromatography. Then the His Smt3 tag could be cleaved using the Ulp1 protease enzyme obtaining a free LL-37 protein.
Improvement
Previously, team iGEM12_Trieste have used the part (BBa_K875009) to express LL-37 in E.coli as a part of sensing mechanism such that bacteria would produce LL-37 to terminate itself when sufficient conditions are met. However, in this form it wasn’t possible to use this part that encodes for antimicrobial peptide against other pathogens unless LL-37 is cloned to pathogen itself. This limits the possible applications of LL-37 as an antimicrobial agent. Therefore, we established a recombinant expression system for production of LL-37 antimicrobial peptide. We have improved the part by adding SUMO fusion tag, Smt3, such that it is first produced in inactive form and hence does not cause toxicity in host during expression. In order to ease the purification following recombinant expression, we further introduced a Histidine tag, His6x tag. In our project we successful expressed LL-37 in E. coli without killing it confirming that Smt3 tag fulfills its role as designed. We further proved that His6x tag facilitates purification of improved part with histidine tag affinity chromatography method. Therefore, we managed to obtain 30 mg of pure LL-37 from 500 ml E.coli culture. Finally, we prove that it is possible to obtain LL-37 peptide alone by cleaving off His6x-Smt3 tag with commercially available and robust enzyme, Ulp1. In our project, LL-37 is used as a positive control for comparison due to its documented antimicrobial activity.
Here, we demonstrate in detail how we have improved and successfully used the part in our project.
Contents:
1. Biology and system
2. Small scale Production
2.1 Cultivations and Induction
2.2 SDS-Page of protein purification
3 Large Scale Production (Half liter batch)
3.1 Cultivations and Induction
3.2 Cell Lysis and Purification
3.3 SDS-Page of protein purification
4. Concentration process and
5. Ulp1 enzyme digestion and SDS PAGE
6. Antimicrobial activity
1. Biology and system
This part encodes for human antimicrobial peptide, cathelicidin also known as LL-37 (2). This part allows expression of LL-37 antimicrobial peptide in form of a fusion protein accompanied with His6x-Smt3 tag. The construct can be purified using with commercially available and widely used affinity chromatography columns designed for His6x tag. Smt3 is tag is used to keep antimicrobial peptide, LL-37 in inactive form by blocking its adhesion to phospholipid bilayer of the production host due to relatively large size of the tag. One major advantage of the fusion system used is that it facilitated easier detection of the peptide with a conventional method, SDS-PAGE. Also, SUMO tag is beneficial due to its effect on solubility of fusion peptide which significantly eases purification step. After purification, to cleave off His6x-Smt3 tag, Ulp1 enzyme that is known for its robust and specific proteolytic activity against SUMO fusion proteins, is used to obtain free DCD1L antimicrobial peptide (3,4).
Promoter information
The pET28a(+) vector (Figure 1) contains a T7lac promoter (TAATACGACTCACTATAGGGGAATTGTGAGCGGATAACAATTC) which consists of the T7 promoter and downstream of that there is the lac operator sequence. In addition, the vector contains the gene lacI, which encodes for the lac repressor (LacI) that binds to the lac operator. This promoter can be induced by isopropyl-β-D-thiogalactopyranoside (IPTG).
2. Small scale Production
2.1 Cultivations and Induction of protein expression
For small scale production, 3-4 colonies from the transformation plates were inoculated (the expression strain cells C2566) transformed with plasmids carrying the gene of interest) in 7 ml LB-kanamycin (50 μg/ml working concentration) and grew the cells at +37 °C until it reached the OD600 value ~0,51. When finished growing the cells, the expression of the gene of interest was induced by adding a final concentration of 0,5 mM IPTG in the cultures and continued to grow at +37 °C shaking. Small scale purification was carried out using the Qiagen Ni-NTA spin columns.
2.2 SDS-Page of protein purification
Following small scale protein expression Qiagen Ni-NTA spin columns are used for purification. From different steps of purification, such as washing and elution, samples are loaded on SDS-PAGE along with samples collected from the small scale expression culture.
SDS-PAGE image (Figure 2) shows that after induction of expression with IPTG, the band gets corresponding to gene of interest gets thicker gradually, from initial (well 1) to 4 hours (well 3). It proves that the T7 promoter system works as intended, without promoter leakage. Although, there is a strong band in both lysate (well 4) and pellet (well 5) suggesting that protein of interest was partially precipitated. Soluble portion of the protein seen in lysate was successfully purified and can be seen in well 7 and 8
3 Large Scale Production (Half liter batch)
3.1 Cultivations and Induction
Large scale protein expression was started by inoculating 3-10 single colonies (of the expression strain cells transformed with plasmids carrying the gene of interest) in 25mL of LB medium with the 50ug/ml Kanamycin and Incubated at +30°C with shaking overnight. The next day we prewarmed 500 mL of LB medium to +37°C in a 2L Erlenmeyer flask and Added 50 ug/ml Kanamycin. Then inoculated 3-5 mL of the overnight grown preculture in 500 mL prewarmed LB. Flask was incubated at +37°C with shaking until OD600 value reached 0.6.
Protein expression was then induced with a final concentration of 0.5mM IPTG and Incubated the culture at +37°C for 4 hours.
3.2 Cell Lysis and Purification
The 35 ml sample with harvested cells was then lysed using Emulsiflex machine and was injected into the ÄKTA Machine for protein purification using His tag affinity method was done the Fractions were collected (Figure 3). We Selected elution fractions with the desired protein from the graph (Figure 4), and run flow-through and elution fractions on SDS-PAGE. Fractions that contain the desired protein were pooled, frozen in liquid nitrogen and stored at -20°C.
The wells (D1, A2, B2…….. A5) were selected from the eluate plate based on the peaks from the graph similar to one shown in (Figure 4) and analysed by running SDS PAGE for desired protein.
3.3 SDS-Page of protein purification
The molecular weight of 6xHis-Smt3-LL-37 is 18.2kDa. After running the selected fractions on the gel (Figure 5), it could be seen that eluates D2, A3, B3, C3 had our desired protein. Hence these were collected for further protein concentration and buffer exchange step and rest eluates were discarded.
4. Concentration process
After pooling of the eluates it is important to concentrate the peptide samples. The protein is currently diluted in 20 ml of buffer. So the samples were concentrated using Sartorious VIVA SPIN 20 ultrafilter (Membrane: 5000 MWCO PES) and exchanged the buffer with 10mM Napi
5. Ulp1 enzyme digestion and SDS PAGE
For digesting His6x-Smt3-containing LL-37 with Ulp1 to obtain free LL-37, 0.5μL of Ulp1 protease was added to 50μL of the purified protein (concentrated in e.g. NaPi buffer). The suitable digestion time was determined by incubating the protein with Ulp1 for different time points and running them on an SDS-PAGE. We can see that 10 mins of Incubation at RT is enough.
Undigested samples are highlighted with a white box: His6x-Smt3-LL-37 18.2kDa. The LL-37 peptide (4.71kDa after digestion) are very low, it is challenging to observe the corresponding bands on the SDS-PAGE gel. Instead, the band corresponding to the His6x-Smt3 part can be clearly observed from the gel (Red Box). The image further illustrates that the activity of Ulp1 is very high, because directly after mixing the protein sample with Ulp1 (0 minutes digested), the digested His6x-Smt3 tag can be clearly distinguished from the undigested protein.
6. Antimicrobial activity Activity
Bacterial cultures were grown until the OD reached 0.05 with corresponding 1.4*10^8 CFU/ml. The samples were incubated at 37°C, shaking for 40 mins with the respective antimicrobial peptides Nisin, DCD-1L and LL-37 (concentration used: 100 ug/ml). After incubation, the OD of the cells were measured. It was observed that the OD values in all the three samples with LL-37, Nisin and produced DCD-1L dropped after 40 minutes indicating antimicrobial property of the peptides.
References
1)Kearse, M., Moir, R., Wilson, A., Stones-Havas, S., Cheung, M., Sturrock, S., Buxton, S., Cooper, A., Markowitz, S., Duran, C., Thierer, T., Ashton, B., Mentjies, P., & Drummond, A. (2012). Geneious Basic: an integrated and extendable desktop software platform for the organization and analysis of sequence data.Bioinformatics, 28(12), 1647-1649.
2) Turner, J., Cho, Y., Dinh, N. N., Waring, A. J., & Lehrer, R. I. (1998). Activities of LL-37, a cathelin-associated antimicrobial peptide of human neutrophils. Antimicrobial agents and chemotherapy, 42(9), 2206-2214.
3) Malakhov, M. P., Mattern, M. R., Malakhova, O. A., Drinker, M., Weeks, S. D., & Butt, T. R. (2004). SUMO fusions and SUMO-specific protease for efficient expression and purification of proteins. Journal of structural and functional genomics, 5(1), 75-86.
4)Marblestone, J. G., Edavettal, S. C., Lim, Y., Lim, P., Zuo, X., & Butt, T. R. (2006). Comparison of SUMO fusion technology with traditional gene fusion systems: Enhanced expression and solubility with SUMO. Protein Science : A Publication of the Protein Society, 15(1), 182–189.
Sequence and Features
- 10COMPATIBLE WITH RFC[10]
- 12COMPATIBLE WITH RFC[12]
- 21INCOMPATIBLE WITH RFC[21]Illegal BglII site found at 127
- 23COMPATIBLE WITH RFC[23]
- 25COMPATIBLE WITH RFC[25]
- 1000COMPATIBLE WITH RFC[1000]